Tag Archives: stenciling

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Blue Brusho Xmas cards in bulk – Rubber Dance

Leave a comment

Hello, it´s my turn today again again at the Rubber Dance blog and I am up with another set of Christmas cards. This time with a strong blue background. For the cards I again used the Textured Xmas Trees 2 stamp set and the Stars 1 stencil.

I created quite a big piece of background paper at once, so I could create a big batch of cards. Here is how I made the background:

First I took the Stars 1 stencil and transparent texture paste. I applied the paste with a palette knife onto the surface thru the stencil. Some areas are fully covered with stars, some only have bits here and there. Next I took out a white mixed media paper (a thicker one that takes wet medium well), applied water onto it and then dabbed some white and turquoise Brusho powder onto the wet paper. Then I just let the powder do it´s magic on the wet surface. If needed, I added some more blue / white on top to make sure all areas got treated.

After the surface was dry, I sprinkled some speckled embossing powder onto the surface and heated it first from under the paper (this prevents the powder from flying away/moving) and then applied heat from the top, until the powder had melted. Now all I needed to do, was to cut the paper into right size for my white card bases and I had several card backgrounds ready.

To these cards I added the stenciled and inked Xmas Trees 1 stencil outlined trees. Before outlining and fussy cutting the images, I treated the paper with Distress Oxide Inks and stamped patterns with Mix It Up 5 stamp set on top. then I only added a stamped and fussy cut sentiment (from Textured Xmas Trees 2 set) onto the card.

On this card I used the same stencil and stamps, but this time, outlined a piece of an old map book page to create a fun Christmas tree centerpiece. Also the first card is done in the same manner.

On this card the centerpiece is again stamped with the Textured Xmas Trees 2 stamp set, but onto a piece of paper I brayered paint that was left over from a gelli printing session. The random stripes of color make the trees look really interesting.

On this card I´ve used the same basic idea, but the tree is stamped onto a gelli printed paper and then fussy cut.

This card is also done with the same basic idea, but mixing both gelli printed and brayered papers together for the centerpiece trees.

I love how the blue background is so strong in color and the embossing powder creates an illusion of falling snow. I hope my idea inspired you. Wishing you a lovely holiday season and many happy creative hours!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Mixed media background Christmas card – Rubber Dance

Leave a comment

Hello, it´s my turn for a Rubber Dance project share today again. I am up with another Christmas card created with a mixed media background. For this card I used all the gelli printed paper bits I had left over from my previously shared Christmas cards. For details I used the Stars 1 stencil, the Mix It Up 5 stamp set and the Textured Xmas Trees 2 stamp set.

Here is how I created the card:

I took a piece of printing paper and adhered the leftover gelli prints onto it first. Next I took some white texture paste and applied it onto the background thru the Stars 1 stencil with a palette knife.

Then I wiped some turquoise dimensional pearls here and there onto the background with a palette knife. After that I took some Walnut Stain Distress Oxide Ink and stamped random text images onto the background. The stamp I used was the Mit It Up 5 set.

Next I changed to a black stamp ink and added other stamped imaged to the background from the same stamp set. Then I applied some Gloss Spray splatters in pink and yellow for contrast and let them dry. Finally, I took a piece of white cardstock and stamped a textured tree with black stamp ink onto it. I finished the card off with a stamped sentiment and adhered the tree with 3D foam onto the card.

This is not a typical Christmas card, but will be a perfect one for that one mixed media loving friend. Wishing you a lovely holiday season!
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Xmas trees on dry embossed background

Leave a comment

Hello and hapy Monday! Here is yet another Xmas card I created.

I used my old dry embossing folder by Cuttlebug to create this background, then inked over the embossed paper with Distress Oxide ink (Faded Jeans) very lightly. I then added some stenciled and stamped Xmas trees as a centerpiece and stamped a sentiment on an inked piece of paper with 3D foam. The dots are made with golden paint and glitter glue.

The stamps used on the stenciled and outlined trees are by Rubber Dance, as is the stencil used here. For more details see the supply list at the end.

Have a good start into the week!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Christmas cards in bulk – Rubber Dance

Leave a comment

Hello, it´s my turn to share Rubber Dance creative goodness today. Today I am sharing a set of cards I created using bits and pieces from all the cards I have shared in November and December so far. While creating the previously shared cards I had plenty of “parts” left over, so I used them for the cards I share here today.

These were the starting points of everything and since I made plenty, here are a few more cards I created with the material left to hopefully inspire you:

For these cards I used the gelli printed red backgrounds and some Xmas Trees 1 stencil created gelli prints that I had added stamping with a stamp from the Mix It Up 5 stamp set from.

For these cards I used some of the stamped and fussy cut Textured Xmas Trees 2 images on a stenciled inked and stamped background. The stamps are from the Mit It Up 5 stamp set again and the stencil is the Marks 2 stencil.

For the last card I used the second Stars 1 gelli printed background in combination with the glitter paste Xmas Trees 1 trees. Here I fussy cut along the glitter edges to create a “cleaner” look. I also decorated the middle tree with some Nuvo Vintage Drops in red to add a fun detail.

I create plenty of Christmas cards every year and it is good to have “starting point material” ready to play with, like I did on these cards. How about you? Do you create cards in bulk? I find it hard to make 20 of the same type, therefore I work my way around and add a little different details to each card.

Happy crafting,
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Gelli printed tone-in-tone Xmas card – Rubber Dance

Leave a comment

Hello, it´s my turn to share a project over at Rubber Dance blog today. And I am up with another Christmas card idea that is very easy to do. For this card I used the Stars 1 stencil and the Textured Xmas Trees 2 stamp set.

Here is how I created this card:

I first played with the Stars 1 stencil and a gelli plate to create these two-toned prints. While doing so, I brayered the residue ink onto a clean piece of white paper which I then used to stamp some Textured Christmas Trees 2 stamp images onto. After that I just cut the papers into size, adhered them onto white card bases and then added the fussy cut Christmas trees on top. I then finished the card off with a stamped sentiment on white cardstock that was adhered on place with 3D foam.

The black pen outline combines the trees together with the background. You might notice from tree picture that there are various types of trees in the photo. I will be sharing the cards I made with those very soon.

I really like the tone-in-tone style of this card. I hope you give this idea a try!
Happy crafting,
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Gelli printed and glitter paste stenciled card set – Rubber Dance

Leave a comment

Hello, it´s my turn over at Rubber Dance blog today again and I am up with a Christmas card set. For these cards I used the Textured Xmas Trees 2 stamp set with the Xmas Trees 1 stencil. I have been playing quite a lot with this stencil, because you can do so many different things with it and it´s slowly but surely turning into a big favorite of mine.

Here is how I created these cards:

I started by creating DIY background paper with a gel plate and acrylic paints. I rolled red acrylic paint onto my gel plate with a brayer, then quickly “lifted” the ink off by pressing the Textured Xmas Trees 2 stamp onto the paint and this way removing the paint from that area. Next I let the paint dry, before applying light blue paint over the red layer. Then I pressed white paper onto the image to create the background paper pattern.

Next I took some glitter paste in green and some papers I had brayered residue paint onto. I placed the stencil over the paper and applied a good layer of the paste with a palette knife onto the paper. As the paste is quite thick, it needs to dry well first.

After the glitter trees were dry, I fussy cut them and left a little of the painted background to be seen around the edges for more interest. Then I added some 3D adhesive foam onto two of them and adhered the middle one directly onto the background and the other two slightly overlappingly on both sides of it.

Adding the 3D foam adds even more depth to the card. For finishing touches I stamped the sentiments onto a white cardstock piece and adhered them onto the card base also with 3D foam. Finally I stamped some stars with black stamp ink to the background.

By the way, if you don´t own any colored glitter paste, you can add loose glitter to a transparent texture paste and mix your own. I hope I could inspire you a little. Have fun creating!
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Christmas card with Rubber Dance stencils and stamps and recycled material

Leave a comment

Hello everyone, it´s again my turn to share a project over at the Rubber Dance blog today and I am up with a stenciled Christmas card idea share this time. For this card I used the Xmas Trees 1 stencil and the Mix It Up 5 stamp set with some Distress Oxide ink. I also added some recycled material a a focal point for this card.

Here is how I created this card:

First I took an old map page and placed the Xmas Trees 1 stencil on it. Then I outlined the tree images with a waterproof black pencil onto the map page. Next I took a premade card base and applied some “speckled egg” Distress Oxide Ink onto a stamping block, misted that with water and pressed the ink very randomly onto the card base.

After that I took the Mix It Up 5 stamp set and stamped random text images with the same stamp ink onto the background. After that I fussy cut the “map trees” and adhered them slightly overlappingly onto the card base.

For finishing touches I added a stamped sentiment with “walnut stain” Distress Oxide ink and a sentiment from the Textured Xmas Trees 2 stamp set. I really like how the card turned out with the “map trees” as a focal point.

I hope this stenciling idea inspires you to create fun, stenciled Christmas cards yourself too!

Have fun creating!!
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Slimline fall card with Textured Mushrooms 2 – Rubber Dance

Leave a comment

Hello, I am up over at Rubber Dance blog with a fall themed card tutorial today. I absolutely adore the new Textured Mushrooms 2 stamp set and wanted to create a fun mixed media card featuring them.

Here is how I created the card:

I started off with a premade gelli printed background I had used the Organic 3 stencil on (see the video here). After that I applied Distress Oxide Inks thru Big Ovals (walnut stain ink), Lattice (speckled egg ink) and Scribbles 1 (hickory smoke ink) stencils to create even more layers to the background.

Next I took a premade paper I had inked with blue toned Distress Oxide Inks and Marks 3 stencil and added some abandoned coral, mustard seed and hickory smoke Distress Oxide Inks on top to then stamp some Textured Mushrooms 2 images onto the inked areas. I fussy cut the mushrooms, added details with a white gel pen and used them on the card.

Before adhering the background onto my slimline card base, I added some staping with black ink onto it with the Mix It Up 6 stamp set and on top of all the layers I then added some Gloss Spray droplets in turquoise and Magenta.

For finishing touches I adhered the fussy cut mushrooms to the card and chose two fun sentiments to go with them.

Have you tried adding plenty of little layers on top of each other with stencils? I hope this card inspires you to play with stencils and then grab the gorgeous Textured Mushrooms 2 set and add fabulous mushrooms to your projects! Have fun!!!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Layered, mixed media flower card with gelli background and stamps

Leave a comment

Hello, this time I am up with a slimline mixed media flower card share over at the Rubber Dance blog. For this card I used a stenciled and gelli printed background paper that I created & used also on my previous projects (for example here). For the card I used the Loose Florals stamp set, as well as the Mix It Up 6 stamp set and the Round In Circles stamp set.

For the background gelli paper I used acrylic paints with Marks 2 stencil. You can find the video to that in the post linked above.

First I cut the gelli printed paper into right size to match my card base. Then I stamped with the Round In Circles stamp set stamp some circles on top of the gelli image with salvaged patina and spiced marmalade Distress Oxide Inks. After that I grabbed the Mix It Up 6 stamp set and black stamp ink and added some random stamping on top for additional interest and contrast.

After that I stamped some Loose Florals with black stamp ink onto white paper and colored them very loosely with watercolors and fussy cut them.

Finally I added some golden and silver ink droplets onto the fussy cut flowers as well as onto the background. Then I arrenged the flowers onto the card, added a chipboard sentiment and some half pearls for decor.

I had so much fun creating this card. It has quite a few layers again and happy, bold colors. I hope it makes it´s recipient happy and also inspired you to grab your stamp and stencil stash a play a little!!
Have fun! xxx, Sanna

Supplies:

ARTIST TRADING CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

ATC´s with Mix it Up 6 stamp set, stencils and Distress Oxide inks – Rubber Dance

Leave a comment

Hello everyone, I have an Artist Trading Card set up over at the Rubber Dance blog this time. I created these Artist Trading Cards with the Mix It Up 6 stamp set, Leaves #2 and Big Ovals stencil. As a background I used a gelli printed paper that I have used on a previous project (here).

The background paper, like mentioned above, is from my previous project and done using acrylic paints, a gelli plate and Cross It, as well as Marks 2 stencils. I used that paper as my starting point and added even more layers on top of it to create an interesting, artsy background for my ATC´s.

I started with the Leaves #2 stencil and cracked pistachio Distress Oxide ink by applying the ink thru the stencil randomly onto the background with a blending brush.

After that I took the Mix It Up 6 stamp set and the Big Ovals stencil and placed it on top of the paper. With ground expresso Distress Oxide I first added some stamped text thru the big ovals stencil onto the background. Then I outlined some of the stamped areas with a black pen thru the same stencil to make them stand out more from the background.

Next I stamped some wilted violet Distress Oxide toned splatters with the heart shaped stamp from the same stamp set and also some black numbers onto the background. After that I took the stamp image of the couple and stamped them with black stamp ink onto white paper and fussy cut them. In addition I added some ground expresso stamped words (hope) onto the background for more interest.

Finally I took some of the Mix A Sentiment 2023 stamp set words that I had left over from my previous projects and added them to go with the images. I also decorated the pages with a black pen outline and some fabric, vintage flowers and white gel pen hearts as well as some glitter enamel dots.

I hope I could inspire you to play with the Mix It Up 6 stamp set and the featured stencils! Have a great time creating!!
xxx, Sanna

Supplies: