Tag Archives: Cardmaking

CARDS, RUBBER DANCE ART STAMPS

Lucky You – cards

Leave a comment

Hello, today I´m sharing the last cards of this year. Just two mushroom cards I created with my final bits of Gloss Sprays and the Textured Mushrooms 2 stamp set.

For these cards I just grabbed a green paper onto which I had applied some texture paste thru the Marks 2 Rubber Stamps stencil. On top some neon colored droplets and a cluster of mushrooms and a stamped sentiment. The “Lucky You” text in German is hand written and some gloss spray droplets accompany it.

I created two of these cards, using the same basic idea on both. Wishing you all a good last day of 2024!!! And all the best for the next year to come. Lot´s of health, happiness and creative fun!! See you on the other side!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Inspirational cards for the New Year with positive and negative stencil images

Leave a comment

Hello, it´s my turn again today over at Rubber Dance blog and I am up with a set of motivational/inspirational cards for the new year, created using positive and negative stencil images. For the cards I used the Textured Mushrooms 2 stamp set with the Wheels and the Leaves 2 stencil.

Here is how I created these cards:

I first took a white card base and added Distress Oxide Ink in blue tones thru the Leaves 2 stencil onto it. For my second background I then took the already inked stencil, spritzed it with water and pressed the wet image onto another piece of white paper and let that dry.

You can see both backgrounds here on the above cards. For centerpiece I used leftover pieces from my previous projects, like the leaf images, the Gloss Spray mushrooms and the circle image. The sentiment are created with the Mix A Sentiment 2023 stamp set. I stamped the images on white paper, then fussy cut every word and arranged different sentiments with the words.

For the second set of cards with orange and red toned backgrounds, I did the same, except I inked a piece of white mixed media paper, then spritzed the Wheels stencil again with water and made a negative image with the leftover ink. In fact, the inked stencil image can be used several times, until the stencil has no ink/color left.

For these cards I used the basic idea, like on the blue cards. If the card recipient loves strong color combinations, then you can give them the positive image card and if not, go for the lighter, negative stencil image background.

Since the Sketchy Leaves stamp is sold out due to popular demand, I will link an alternative product for you. Basically any leftover images can be used as centerpieces here. Just cluster them and add an interesting sentiment and your inspirational mixed media cards are done.

Hope you get inspired!
xxx, Sanna

Supplies:

CARDS

Graphic 45 Xmas cards, Vol. 2

Leave a comment

Hello and happy Monday! Here is a second batch of Christmas cards created with the “Let´s get Cozy” collection by Graphic 45.

For these cards I again used the above mentioned collection and some 3D foam tape here and there.

Also an additional rhinestone or a half pearl makes an apperance here and there. An addition from my older stash.

The stamped sentiments are again from the Textured Xmas Trees 2 stamp set by Rubber Dance and they go really well with the collection.

This is the last share of Christmas cards for this year. I made quite a few again. And this years colors are very much dominated by the color blue, I noticed :).

I hope you have enjoyed seeing my cards and maybe also got inspired by them. Happy Holiday Season, everyone!!!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Blue Brusho Xmas cards in bulk – Rubber Dance

Leave a comment

Hello, it´s my turn today again again at the Rubber Dance blog and I am up with another set of Christmas cards. This time with a strong blue background. For the cards I again used the Textured Xmas Trees 2 stamp set and the Stars 1 stencil.

I created quite a big piece of background paper at once, so I could create a big batch of cards. Here is how I made the background:

First I took the Stars 1 stencil and transparent texture paste. I applied the paste with a palette knife onto the surface thru the stencil. Some areas are fully covered with stars, some only have bits here and there. Next I took out a white mixed media paper (a thicker one that takes wet medium well), applied water onto it and then dabbed some white and turquoise Brusho powder onto the wet paper. Then I just let the powder do it´s magic on the wet surface. If needed, I added some more blue / white on top to make sure all areas got treated.

After the surface was dry, I sprinkled some speckled embossing powder onto the surface and heated it first from under the paper (this prevents the powder from flying away/moving) and then applied heat from the top, until the powder had melted. Now all I needed to do, was to cut the paper into right size for my white card bases and I had several card backgrounds ready.

To these cards I added the stenciled and inked Xmas Trees 1 stencil outlined trees. Before outlining and fussy cutting the images, I treated the paper with Distress Oxide Inks and stamped patterns with Mix It Up 5 stamp set on top. then I only added a stamped and fussy cut sentiment (from Textured Xmas Trees 2 set) onto the card.

On this card I used the same stencil and stamps, but this time, outlined a piece of an old map book page to create a fun Christmas tree centerpiece. Also the first card is done in the same manner.

On this card the centerpiece is again stamped with the Textured Xmas Trees 2 stamp set, but onto a piece of paper I brayered paint that was left over from a gelli printing session. The random stripes of color make the trees look really interesting.

On this card I´ve used the same basic idea, but the tree is stamped onto a gelli printed paper and then fussy cut.

This card is also done with the same basic idea, but mixing both gelli printed and brayered papers together for the centerpiece trees.

I love how the blue background is so strong in color and the embossing powder creates an illusion of falling snow. I hope my idea inspired you. Wishing you a lovely holiday season and many happy creative hours!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS, TUTORIALS

Mixed media background Christmas card – Rubber Dance

Leave a comment

Hello, it´s my turn for a Rubber Dance project share today again. I am up with another Christmas card created with a mixed media background. For this card I used all the gelli printed paper bits I had left over from my previously shared Christmas cards. For details I used the Stars 1 stencil, the Mix It Up 5 stamp set and the Textured Xmas Trees 2 stamp set.

Here is how I created the card:

I took a piece of printing paper and adhered the leftover gelli prints onto it first. Next I took some white texture paste and applied it onto the background thru the Stars 1 stencil with a palette knife.

Then I wiped some turquoise dimensional pearls here and there onto the background with a palette knife. After that I took some Walnut Stain Distress Oxide Ink and stamped random text images onto the background. The stamp I used was the Mit It Up 5 set.

Next I changed to a black stamp ink and added other stamped imaged to the background from the same stamp set. Then I applied some Gloss Spray splatters in pink and yellow for contrast and let them dry. Finally, I took a piece of white cardstock and stamped a textured tree with black stamp ink onto it. I finished the card off with a stamped sentiment and adhered the tree with 3D foam onto the card.

This is not a typical Christmas card, but will be a perfect one for that one mixed media loving friend. Wishing you a lovely holiday season!
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Xmas trees on dry embossed background

Leave a comment

Hello and hapy Monday! Here is yet another Xmas card I created.

I used my old dry embossing folder by Cuttlebug to create this background, then inked over the embossed paper with Distress Oxide ink (Faded Jeans) very lightly. I then added some stenciled and stamped Xmas trees as a centerpiece and stamped a sentiment on an inked piece of paper with 3D foam. The dots are made with golden paint and glitter glue.

The stamps used on the stenciled and outlined trees are by Rubber Dance, as is the stencil used here. For more details see the supply list at the end.

Have a good start into the week!
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Christmas cards in bulk – Rubber Dance

Leave a comment

Hello, it´s my turn to share Rubber Dance creative goodness today. Today I am sharing a set of cards I created using bits and pieces from all the cards I have shared in November and December so far. While creating the previously shared cards I had plenty of “parts” left over, so I used them for the cards I share here today.

These were the starting points of everything and since I made plenty, here are a few more cards I created with the material left to hopefully inspire you:

For these cards I used the gelli printed red backgrounds and some Xmas Trees 1 stencil created gelli prints that I had added stamping with a stamp from the Mix It Up 5 stamp set from.

For these cards I used some of the stamped and fussy cut Textured Xmas Trees 2 images on a stenciled inked and stamped background. The stamps are from the Mit It Up 5 stamp set again and the stencil is the Marks 2 stencil.

For the last card I used the second Stars 1 gelli printed background in combination with the glitter paste Xmas Trees 1 trees. Here I fussy cut along the glitter edges to create a “cleaner” look. I also decorated the middle tree with some Nuvo Vintage Drops in red to add a fun detail.

I create plenty of Christmas cards every year and it is good to have “starting point material” ready to play with, like I did on these cards. How about you? Do you create cards in bulk? I find it hard to make 20 of the same type, therefore I work my way around and add a little different details to each card.

Happy crafting,
Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Slimline Christmas card

Leave a comment

Hello and happy Thursday! Here is another slimline card I created with the Gloss Spray Xmas Trees I made in bulk.

For this one I just took the premade trees and arranged and adhered them onto a slimline card, then added some stamped stars from the same stamp set (see details on the supply list). I used Distress Oxide inks for stamping the stars.

After that I added some datails with Stickles and a stamped sentiment into the middle, adhered with 3D foam tape.

Have a great rest of the week!
Happy crafting,
xxx, Sanna

Supplies:

CARDS

Xmas cards with Graphic 45 papers

Leave a comment

Hello, how about another bulk share of Christmas cards I made for this year. I used the Graphic 45 collection “Let´s get cozy” for these cards. Here they are:

I used the papers and ephemera as they came, then added some half pearls and a stamped sentiment (from Textured Xmas Trees 2 stamp set by Rubber Dance).

In addition I also took a good look at my stash and found some rhinestone embellishments. They got added too. And some parts are adhered on place with 3D foam for additional depth.

This years cards seem to have lots of blue tones in them :).

That´s the first set – there might be another one, too. Which one is your favorite?

Hope I could inspire you with these cards. Happy crafting,
xxx, Sanna

Supplies:

CARDS, RUBBER DANCE ART STAMPS

Gelli printed tone-in-tone Xmas card – Rubber Dance

Leave a comment

Hello, it´s my turn to share a project over at Rubber Dance blog today. And I am up with another Christmas card idea that is very easy to do. For this card I used the Stars 1 stencil and the Textured Xmas Trees 2 stamp set.

Here is how I created this card:

I first played with the Stars 1 stencil and a gelli plate to create these two-toned prints. While doing so, I brayered the residue ink onto a clean piece of white paper which I then used to stamp some Textured Christmas Trees 2 stamp images onto. After that I just cut the papers into size, adhered them onto white card bases and then added the fussy cut Christmas trees on top. I then finished the card off with a stamped sentiment on white cardstock that was adhered on place with 3D foam.

The black pen outline combines the trees together with the background. You might notice from tree picture that there are various types of trees in the photo. I will be sharing the cards I made with those very soon.

I really like the tone-in-tone style of this card. I hope you give this idea a try!
Happy crafting,
Sanna

Supplies: