The increasing world population, urbanization, as well as higher standards of living, have been i... more The increasing world population, urbanization, as well as higher standards of living, have been identified as pivotal factors in higher production of waste. In urban Ghana, the official method to handle waste is to dispose it in landfills. The main aim of this investigation was to determine the potential of local recycling of plastic waste from household waste streams. The study was held in a student's dormitory in Kumasi. After extensive environmental education measures, the proportion of plastic fractions of 37 people's daily household waste, which could be recycled on site, was determined for 22 days using a waste separation system. The results show that with the help of separation and recycling of the study group's waste, in total it would be possible to save an average of 8.6 kg of plastic waste per month on landfills. The findings demonstrate how much valuable plastic waste could be saved from the landfills to obtain secondary raw materials and improve circularity of plastic material. The results of the study contribute to research on the composition of household waste in the urban areas of Ghana.
Within the symposium "Waste Reduction and Recycling: Challenges and Trends for Source Separation,... more Within the symposium "Waste Reduction and Recycling: Challenges and Trends for Source Separation," which was held from June 6 to 10, 2016, participants discussed the successful implementation of separate collection. The conclusions of this symposium are summarized in this chapter and consider some additional aspects. It is focused on the situation in China and Germany, but they are also applicable to different situations and regions around the world. For countries with rising waste management challenges, source separation has been proven to be one of the fundamental solutions for the sustainable handling of resources and achievement of a circular economy. The driving forces for establishing of efficient collection schemes are described in this chapter, referring back to the previous chapters of the book, where the challenges and possibilities for different fractions and separation technologies are presented.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
The transition from a planned to a market economy has been a great challenge for all post-sociali... more The transition from a planned to a market economy has been a great challenge for all post-socialist states of the former Eastern Bloc. Public services which were to a major extent previously subsidized by the state needed to be adapted to new economic realities. This paper will present some of the results of a country overview report. This report represents the first working package of the WaTra project, which aims to help understand and develop the waste management systems of selected transition economies. 13 European and post-Soviet countries were chosen with different starting conditions and economic states to investigate which are the crucial factors in enabling the development of modern waste management. The countries considered were compared with each other using indicators of waste management. Waste collection, waste treatment, landfilling, recycling, composting and incinerated waste per capita are the main aspects taken into account and set in relation to economic indicators. Western EU countries generate higher amounts of waste per capita and have higher recycling rates. Landfilling is the major waste treatment method in post-Soviet and Eastern European countries, even among the EU states. The change from practices of only landfilling to modern waste management systems with high recycling and recovery is more recognizable. The more developed a country's waste management system is, the more waste is generated according to the strengthening of its economy.
The concept of circular economy supports mitigation of climate change and other environmental pre... more The concept of circular economy supports mitigation of climate change and other environmental pressures to the planet. Circulating materials in anthropogenic processes come with the risk of accumulating hazardous substances and compounds. In this concept, waste incineration or waste-to-energy (WtE) is a necessary technology to remove these compounds from the life cycle. In this mini-review, contaminants of major importance in the flue gas from waste incineration plants and their environmental impact are discussed. Air pollution of WtE is often seen as the most relevant environmental impact of this treatment option. The emission values parameter set for different countries is presented and compared. The most stringent legally set of emission values could be found in parts of Europe and South Korea. Japan also permits similar strict values when authorising individual incineration plants. In North America, the values are partially less strict as the best available technologies in Europe suggest being possible. Emerging economies, such as India and China, have shown efforts to improve their environmental protection standards but still have room to improve. This could be set in relation to other industrial emitting processes and therefore could be used to assess the relevance of this industry sector to the national emission inventories.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
Sorting multilayer packaging is still a major challenge in the recycling of post-consumer plastic... more Sorting multilayer packaging is still a major challenge in the recycling of post-consumer plastic waste. In a 2019 Germany-wide field study with 248 participants, lightweight packaging (LWP) was randomly selected and analyzed by infrared spectrometry to identify multilayer packaging in the LWP stream. Further investigations of the multilayer packaging using infrared spectrometry and microscopy were able to determine specific multilayer characteristics such as typical layer numbers, average layer thicknesses, the polymers of the outer and inner layers, and typical multilayer structures for specific packaged goods. This dataset shows that multilayer packaging is mainly selected according to the task to be fulfilled, with practically no concern for its end-of-life recycling properties. The speed of innovation in recycling processes does not keep up with packaging material innovations.
The increasing consumption of plastics and plastic products results in correspondingly substantia... more The increasing consumption of plastics and plastic products results in correspondingly substantial volumes of waste, which poses considerable environmental burdens. With the ongoing environmental actions, the application of circular economy on this waste stream is becoming inevitable. In this paper, the topics of plastics recycling, circular economy on plastics, and challenges to plastic waste recycling are critically reviewed. In the first part of this paper, the development of research on plastic recycling was viewed from 1950 until 2020 using the scientific database Web of Science, and 682 related studies were found and used to assess the changing research priorities along that timeline. The following sections discuss the potentials and requirements to enhance the quality of the produced recycled plastic, in connection with the factors that currently limit it. In conclusion, the quality of recycled plastic is generally determined by the homogeneity of the recovered plastic feed. ...
Most current patterns of production and consumption follow a linear "extract, produce, consu... more Most current patterns of production and consumption follow a linear "extract, produce, consume, dispose" model. According to the Circular Gap Report 2020, the global economy is just 9% circular. This economic model is contributing to a massive transgression of "planetary boundaries" and the destabilisation of ecosystems and factors essential to human life such as the climate system and biodiversity. As a result, there is currently much discussion of a paradigm shift in the industrial value creation model, away from a resource-intensive system and towards a resource-productive, predominantly circular model. This shift offers significant opportunities for an industrialized, exporting nation like Germany – ultimately, it entails nothing less than a recasting of the "Made in Germany" model. The European Union and several of its member states have already developed strategic plans for the transition to a resource-efficient economic system based on circular e...
Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 2021
The concept of circular economy supports mitigation of climate change and other environmental pre... more The concept of circular economy supports mitigation of climate change and other environmental pressures to the planet. Circulating materials in anthropogenic processes come with the risk of accumulating hazardous substances and compounds. In this concept, waste incineration or waste-to-energy (WtE) is a necessary technology to remove these compounds from the life cycle. In this mini-review, contaminants of major importance in the flue gas from waste incineration plants and their environmental impact are discussed. Air pollution of WtE is often seen as the most relevant environmental impact of this treatment option. The emission values parameter set for different countries is presented and compared. The most stringent legally set of emission values could be found in parts of Europe and South Korea. Japan also permits similar strict values when authorising individual incineration plants. In North America, the values are partially less strict as the best available technologies in Europ...
The use of general descriptive names, registered names, trademarks, service marks, etc. in this p... more The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
The increasing world population, urbanization, as well as higher standards of living, have been i... more The increasing world population, urbanization, as well as higher standards of living, have been identified as pivotal factors in higher production of waste. In urban Ghana, the official method to handle waste is to dispose it in landfills. The main aim of this investigation was to determine the potential of local recycling of plastic waste from household waste streams. The study was held in a student's dormitory in Kumasi. After extensive environmental education measures, the proportion of plastic fractions of 37 people's daily household waste, which could be recycled on site, was determined for 22 days using a waste separation system. The results show that with the help of separation and recycling of the study group's waste, in total it would be possible to save an average of 8.6 kg of plastic waste per month on landfills. The findings demonstrate how much valuable plastic waste could be saved from the landfills to obtain secondary raw materials and improve circularity of plastic material. The results of the study contribute to research on the composition of household waste in the urban areas of Ghana.
Within the symposium "Waste Reduction and Recycling: Challenges and Trends for Source Separation,... more Within the symposium "Waste Reduction and Recycling: Challenges and Trends for Source Separation," which was held from June 6 to 10, 2016, participants discussed the successful implementation of separate collection. The conclusions of this symposium are summarized in this chapter and consider some additional aspects. It is focused on the situation in China and Germany, but they are also applicable to different situations and regions around the world. For countries with rising waste management challenges, source separation has been proven to be one of the fundamental solutions for the sustainable handling of resources and achievement of a circular economy. The driving forces for establishing of efficient collection schemes are described in this chapter, referring back to the previous chapters of the book, where the challenges and possibilities for different fractions and separation technologies are presented.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
The transition from a planned to a market economy has been a great challenge for all post-sociali... more The transition from a planned to a market economy has been a great challenge for all post-socialist states of the former Eastern Bloc. Public services which were to a major extent previously subsidized by the state needed to be adapted to new economic realities. This paper will present some of the results of a country overview report. This report represents the first working package of the WaTra project, which aims to help understand and develop the waste management systems of selected transition economies. 13 European and post-Soviet countries were chosen with different starting conditions and economic states to investigate which are the crucial factors in enabling the development of modern waste management. The countries considered were compared with each other using indicators of waste management. Waste collection, waste treatment, landfilling, recycling, composting and incinerated waste per capita are the main aspects taken into account and set in relation to economic indicators. Western EU countries generate higher amounts of waste per capita and have higher recycling rates. Landfilling is the major waste treatment method in post-Soviet and Eastern European countries, even among the EU states. The change from practices of only landfilling to modern waste management systems with high recycling and recovery is more recognizable. The more developed a country's waste management system is, the more waste is generated according to the strengthening of its economy.
The concept of circular economy supports mitigation of climate change and other environmental pre... more The concept of circular economy supports mitigation of climate change and other environmental pressures to the planet. Circulating materials in anthropogenic processes come with the risk of accumulating hazardous substances and compounds. In this concept, waste incineration or waste-to-energy (WtE) is a necessary technology to remove these compounds from the life cycle. In this mini-review, contaminants of major importance in the flue gas from waste incineration plants and their environmental impact are discussed. Air pollution of WtE is often seen as the most relevant environmental impact of this treatment option. The emission values parameter set for different countries is presented and compared. The most stringent legally set of emission values could be found in parts of Europe and South Korea. Japan also permits similar strict values when authorising individual incineration plants. In North America, the values are partially less strict as the best available technologies in Europe suggest being possible. Emerging economies, such as India and China, have shown efforts to improve their environmental protection standards but still have room to improve. This could be set in relation to other industrial emitting processes and therefore could be used to assess the relevance of this industry sector to the national emission inventories.
This article is an open access article distributed under the terms and conditions of the Creative... more This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY
Sorting multilayer packaging is still a major challenge in the recycling of post-consumer plastic... more Sorting multilayer packaging is still a major challenge in the recycling of post-consumer plastic waste. In a 2019 Germany-wide field study with 248 participants, lightweight packaging (LWP) was randomly selected and analyzed by infrared spectrometry to identify multilayer packaging in the LWP stream. Further investigations of the multilayer packaging using infrared spectrometry and microscopy were able to determine specific multilayer characteristics such as typical layer numbers, average layer thicknesses, the polymers of the outer and inner layers, and typical multilayer structures for specific packaged goods. This dataset shows that multilayer packaging is mainly selected according to the task to be fulfilled, with practically no concern for its end-of-life recycling properties. The speed of innovation in recycling processes does not keep up with packaging material innovations.
The increasing consumption of plastics and plastic products results in correspondingly substantia... more The increasing consumption of plastics and plastic products results in correspondingly substantial volumes of waste, which poses considerable environmental burdens. With the ongoing environmental actions, the application of circular economy on this waste stream is becoming inevitable. In this paper, the topics of plastics recycling, circular economy on plastics, and challenges to plastic waste recycling are critically reviewed. In the first part of this paper, the development of research on plastic recycling was viewed from 1950 until 2020 using the scientific database Web of Science, and 682 related studies were found and used to assess the changing research priorities along that timeline. The following sections discuss the potentials and requirements to enhance the quality of the produced recycled plastic, in connection with the factors that currently limit it. In conclusion, the quality of recycled plastic is generally determined by the homogeneity of the recovered plastic feed. ...
Most current patterns of production and consumption follow a linear "extract, produce, consu... more Most current patterns of production and consumption follow a linear "extract, produce, consume, dispose" model. According to the Circular Gap Report 2020, the global economy is just 9% circular. This economic model is contributing to a massive transgression of "planetary boundaries" and the destabilisation of ecosystems and factors essential to human life such as the climate system and biodiversity. As a result, there is currently much discussion of a paradigm shift in the industrial value creation model, away from a resource-intensive system and towards a resource-productive, predominantly circular model. This shift offers significant opportunities for an industrialized, exporting nation like Germany – ultimately, it entails nothing less than a recasting of the "Made in Germany" model. The European Union and several of its member states have already developed strategic plans for the transition to a resource-efficient economic system based on circular e...
Waste management & research : the journal of the International Solid Wastes and Public Cleansing Association, ISWA, 2021
The concept of circular economy supports mitigation of climate change and other environmental pre... more The concept of circular economy supports mitigation of climate change and other environmental pressures to the planet. Circulating materials in anthropogenic processes come with the risk of accumulating hazardous substances and compounds. In this concept, waste incineration or waste-to-energy (WtE) is a necessary technology to remove these compounds from the life cycle. In this mini-review, contaminants of major importance in the flue gas from waste incineration plants and their environmental impact are discussed. Air pollution of WtE is often seen as the most relevant environmental impact of this treatment option. The emission values parameter set for different countries is presented and compared. The most stringent legally set of emission values could be found in parts of Europe and South Korea. Japan also permits similar strict values when authorising individual incineration plants. In North America, the values are partially less strict as the best available technologies in Europ...
The use of general descriptive names, registered names, trademarks, service marks, etc. in this p... more The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use. The publisher, the authors and the editors are safe to assume that the advice and information in this book are believed to be true and accurate at the date of publication. Neither the publisher nor the authors or the editors give a warranty, express or implied, with respect to the material contained herein or for any errors or omissions that may have been made. The publisher remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.
Uploads
Papers by Roman Maletz