Questions tagged [sata]
Devices such as computer hard drives that communicate according to the Serial Advanced Technology Attachment (SATA) hardware and data interface protocol.
111 questions
2
votes
1
answer
69
views
New SSD only bootable via USB, not SATA
I've been working on a very problematic Early 2011 MacBook Pro. Recently I managed to install macOS Sierra, using another Mac to perform the install. There are lots of other avenues I've been down ...
0
votes
0
answers
50
views
MacOS Catalina not working on Samsung SSD from SATA
I have MacBook Pro Mid 2012 whose HDD I replaced with SSD two years back and continue to work with High Sierra until I get end of support few months back.
So, I upgraded my OS to Catalina and since ...
0
votes
1
answer
121
views
SATA based Hard drives/SSDs models that are compatible with the PowerMac G5
My understanding is that the PowerMac G5 series is not compatible with SATA III, so most SATA-based SSDs or HDDs will not work with a G5. I have a 2004-era G5 (PowerMac7,3) and I would like to add an ...
1
vote
1
answer
125
views
Booting from a SATA case crashes various operating systems
After installing Windows on an external drive, it crashes when connecting via a SATA case. (Crashes when booting Windows, Linux, and macOS). The installation was based on the answer from Drivers not ...
1
vote
1
answer
635
views
What is the correct model/type SSD for an old MacBook Pro 13-inch Early 2011?
My uncle has the following MacBook Pro, it according with About This Mac
MacBook Pro (13-inch, Early 2011)
Processor 2.3 GHz Intel Core i5
Memory 4 GB 1333 MHz DDR3
Graphics Intel HD Graphics 3000 ...
0
votes
2
answers
197
views
can I upgrade a 2012 MBPr SSD with a modern SSD NVMe using an adapter
I want to upgrade the SSD stick in a 2012 MBPr from the m.SATA to a more modern NVMe. I know the speed will be the same (6GB), but my plan is to remove the NVMe drive and use it elsewhere later. I ...
0
votes
0
answers
25
views
What is the correct model/type SSD for an old MacBook Pro 13.3? [duplicate]
I have an old MacBook Pro - it is:
MBP 13.3/2.9/2X4GB/750/SD
Model No: A1278
So far, it works in peace, it has a HDD of 750GB - in this point is not possible do an upgrade of the macOS itself. An ...
2
votes
2
answers
1k
views
ATA Secure Erase of external SSD
I have an external SSD I would like to delete with ATA Secure Erase. I don't want to overwrite it with 0s or random bits. Can I do this with macOS (13.0.1) on my MacBook Air M1 or more generally on ...
0
votes
0
answers
563
views
External SSD with SATA to USB 3 not being recognized by MacBookAir M2 while with SATA to USB 2 is working fine
The SSD:
Samsung 850EVO 500GB (ExFat formatted)
The adapters:
SATA to USB 3 type A (ICY BOX IB-AC603a-U3)
SATA to USB 3 type A (Sabrent)
SATA to USB 2 type A (ICY BOX IB-AC603)
USB 3 type A to USB ...
0
votes
0
answers
321
views
3.5" SATA Seagate Barracuda not mounting via USB adapter
I have a late 2009 27" iMac which I upgraded with a OWC SSD kit. Fantastic results, I highly recommend it, feels like a new machine. But I was facing problems restoring from a Time Machine back-...
0
votes
0
answers
51
views
Bootcamp no longer sees my internal 2.5" SATA SSD
It seems either Bootcamp and/or Windows have been updating themselves a lot recently... in the last ~4 months (give or take a few months). I only realised this week that my 2TB internal storage drive ...
1
vote
1
answer
893
views
External SSD connected with adapter won't show up in Disk Utility
I recently bought an SSD (SanDisk Plus, 480GB, 2.5", SATA III) and tried to connect it to my MacBook Pro (M1, 2020) by chaining:
a USB 3.0-to-SATA III adapter:
and a USB-3-to-USB-C USB-C PRO ...
0
votes
2
answers
1k
views
Can I upgrade MacBook Pro mid-2012 with PCIe gen 4 using a SATA adapter?
My MacBook Pro's performance has gone down and sometimes files are unreadable and sometimes MacBook is unable to boot up, so I am thinking to upgrade my MacBook with a PCIe gen4 SSD and use an adapter ...
0
votes
1
answer
739
views
If a Macbook has TRIM support, does this mean it automatically uses TRIM command on deleted files?
Under SATA/SATA Express in my System Information, I have "Yes" for TRIM support, so I assume TRIM has been enabled for my Mac. Does this mean that every time I delete a file, the TRIM ...
0
votes
0
answers
132
views
MBP 2009 does not detect new Internal SSD disk
I have a Macbook Pro - Mid 2009 - 15"
I bought a new SSD (Crucial) to replace the SATA Internal Disk. Problem is that the computer does not detect new Internal SSD disk.
The first thing I did ...
1
vote
0
answers
139
views
6+12 PIN (Macbook Air 2011 - A1370) SSD transfer speeds issues
I upgraded my MacBook Air 2011 (A1370) to a Crucial MX500 SATA SSD with better speeds and would like to give the original APPLE TS128C (128gb) a second life.
I have tried a basic enclosure that does ...
1
vote
1
answer
128
views
Does anybody make an adapter to convert a Mac's eSATA port to USB 3 (or later, or Thunderbolt)?
When I got my iMac ~10 years ago I had Other World Computing install an eSATA port on it. I've never used it for much, but now I'd like to adapt it if possible to one of the more common ports, like ...
1
vote
1
answer
279
views
MacBook Pro doesn't detect boot drive if turned off for ~5-10 minutes
I'm repairing a 13" MacBook Pro Early 2011 (A1278). This will seem like a duplicate issue, but stick with me and you'll see something odd is going on.
TDLR; Fixed missing/undetected boot drive ...
0
votes
2
answers
4k
views
External SATA drive not showing up when connected via USB adapter
I've got a PATA/SATA adapter which connects via USB, and if I connect PATA drives to it they show up fine, but for some reason SATA drives aren't working. If I connect the same SATA drive to my ...
0
votes
0
answers
3k
views
Are cheap 2.5" external hard disks constrained to Exfat and incompatible with Time Machine? Is this a physical limitation / hardware issue?
I bought two 2TB 2.5" external HDDs that came with the following warning message in a Readme file contained in the drives.
"The drive can only be formatted with Exfat and cannot be formatted in other ...
1
vote
1
answer
698
views
Setting up SSD with Catalina install
I recently bought a used 2017 iMac which came with 2 physically separate drives it seems. One is the internal 32GB Apple PCI-Express Internal Physical Disk and the second one is a 256GB Samsung SSD (...
1
vote
0
answers
33
views
External SSD not visible to MacPro
Strange one this. I have a new bare SSD I'm trying to add to my system. When installed in the enclosure I have set aside for this drive it will not show up on my system. To confirm the enclosure is ...
2
votes
1
answer
77
views
I think my drives are in the wrong bays on my iMac
I bought a used 2011 iMac a couple years back. It till had the original HDD so I bought a 250gb SSD to use as the main/boot drive and a 1TB HDD. I brought it to a shop that does work on Macs and they ...
1
vote
1
answer
312
views
Are the internal drives on a MacPro3,1 hot swappable?
I believe SATA drives were designed to be hot swappable, but I imagine there might still be some hardware restrictions.
So if you were to unmount a drive, can you swap out a drive in one of the ...
1
vote
0
answers
835
views
How to properly install Bootcamp onto internal SATA disk on Mac Pro (2019)
I recently got the new Mac Pro (2019) with 256GB SSD. The built-in drive is quite small to hold both macOS and Windows, so I installed a SATA SSD using some DIY-cabling solutions to the internal SATA ...
0
votes
0
answers
2k
views
Upgrade MacBook Pro Mid 2012 system to Samsung SSD 860 EVO 500GB (Mac OS Mojave)
I have different information related to installation new SSD.
If we will try search through Amazon help it shows that the disk Samsung SSD 860 EVO 500GB will work fine with MacBook Pro 13 inch Mid ...
0
votes
1
answer
1k
views
How to make SSD Drive bootable from a disk utilies restore [duplicate]
My mid-2009 mac book pro hard drive is dying so I bought an SSD to replace it. I tried plugging in the ssd drive to the mac via a usb to sata connection and using SuperDuper to copy the contents (saw ...
1
vote
0
answers
428
views
Is a DiskWarrior warning about spare blocks applicable to SSDs?
I got the following warning from DiskWarrior on my Mac Pro in which I installed a SATA SSD:
I know some sort of reassignments are normal on an SSD as it comes from the factory. However, I don't know ...
3
votes
2
answers
5k
views
how to prepare two SSDs after upgrade (merge to fusion drive or not, terminal commands)
I just upgraded the CPU of my 2015 27" Retina iMac and while I was in there I took out the 1TB HDD and replaced it with a 512GB Samsung 850 Pro SSD. Now I'm ready to set it all up, but I'm not sure ...
0
votes
1
answer
591
views
iMac 21.5” mid-2010 SATA Specification
Does the 21.5” mid-2010 iMac support the full 6 Gbps SATA III standard?
0
votes
1
answer
3k
views
macbook pro mid 2012 hard drive upgrade to SSD SATA recommendation [closed]
I want to upgrade my MacBook pro mid 2012 Hard disk to 512 SSD, I opened my MacBook back and took photo see below.
and then I found this on website with the following spec,
the size of my hard drive ...
0
votes
1
answer
288
views
Mac Mini TAOP--124 Hardware Test
I recently bought a Mac Mini which I knew was missing the hard drive, so easy fix right? Whenever I start the Mac the fans are running really high and the odd thing is I can only start the Mac in safe ...
4
votes
1
answer
1k
views
Make Hard Drive appear as Bootcamp for Parallels
Parallels Dekstop 13.0.1 BE won't let me add a Physical Internal HDD to the VM system.
There is a SATA HardDrive in my system with a GPT partition table and a big (2TB) NTFS partition. I use it when ...
1
vote
2
answers
746
views
How would I architecture Direct Attached Storage?
This is a sequel question to a previous one.
I would like to set up a home networking solution with Direct Attached Storage.
"Direct Attached Storage" seems to suggest that I would run cables (...
1
vote
1
answer
1k
views
SSD for Mac Book Pro 2012 optical disc drive
I'm about to upgrade my MBP mid 2012 with two SSD drives instead of the stock HDD and optical disc drive. I read on different forums that the optical drive link with the motherboard is only SATA 2 and ...
2
votes
1
answer
413
views
HGST 1TB in Mid 2012 MacBook Pro not working in SATA bay but drive seems fine
In my Mid-2012 13 inch MacBook Pro I have a 500GB HDD in the standard SATA bay and I replaced the DVD drive with a drive cage which has a SSD in it. I bought this Hitachi HST 1TB drive \to replace my ...
1
vote
1
answer
395
views
My SATA hardrive was ejected, and is unable to be remounted due to issues
I have a Mac Pro 2012, so it's running Mountain Lion :( but it has a few partitioned drives. I have tower 1 and tower 2. Tower 2 just recently froze my computer, this has most of my videos for editing,...
0
votes
1
answer
1k
views
SSD not working internally
I recently bought a Corsair Force LE 240GB SSD and tried to do a net recovery on a macbook pro A1278 (MacBook Pro 13" Early 2011 with i5) to the latest El Capitan, but for some reason, this is only ...
2
votes
1
answer
926
views
MacBook Pro mid 2012 13.3 HDD cable performance
I am helping a friend to fix her MacBook Pro 13.3 performance problems.
It was barely booting, and terribly slow for disk seeks. Then I replaced the HDD.
It was perfect with new SSD and El Capitan ...
1
vote
1
answer
1k
views
MacBook Pro suddenly started to freeze with any action (using SSD)
I'm having a trouble with my MacBook Pro (Mid 2012).
I have upgraded it (5 months ago) to use a Kingston SSD instead of a SATA, and everything was perfect. Very fast and smooth...until yesterday. I ...
2
votes
0
answers
4k
views
Apple Hardware Test result: 4HDD/11/40000000: SATA(0,0). But repaired Disk and Permissions w/o a problem
Ran an Apple Hardware Test. Result: 4HDD/11/40000000: SATA(0,0).
Then repaired Disk and Permissions. Result: Volume appears to be okay.
But during use, sometimes it freezes randomly and my MBP ...
1
vote
1
answer
588
views
My SSD seems slow, could it be the link speed?
I just replaced my old HD from a late-2009 iMac with a new Samsung SSD 850 EVO 1TB.
It was installed by an official Apple repair store but I am worried because it seems slower than my new macboook ...
0
votes
1
answer
2k
views
Hard drive boots over USB but not when install internally
I am trying to upgrade from a 500GB HD (http://www.newegg.com/Product/Product.aspx?Item=N82E16822136314) to a 1TB HD (http://www.newegg.com/Product/Product.aspx?Item=N82E16822152291). The only spec ...
2
votes
1
answer
1k
views
Can SATA negotiated link speed be set lower in software?
Background: I have a MacBook Pro (late 2011) with a SATA III 6Gb SSD installed in place of the optical drive. Sources say this configuration should work, but I've been having problems (read/write ...
1
vote
1
answer
3k
views
Connect MacBook Pro 13 late 2012 SSD to SATA?
I have an SSD hard drive from MacBook Pro late 2012 (A1425). Is there a possibility to somehow connect it to a normal PC through SATA, PCIe etc.?
2
votes
1
answer
1k
views
SATA3 in a 2007 MacBook Pro?
I have an aging 15" MacBook Pro from 2007:
Model ID: MacBookPro3,1
Model No.: A1226
In an attempt to squeeze a bit more life out of it, I've replaced the battery, upped the RAM, and I'm about to ...
0
votes
1
answer
502
views
SATA cable problem?
I have a MacBook Pro 8,2 (15 inch, early 2011) running Yosemite (with encryption enabled). I have a strange problem that seems to relate to my boot drive (Samsung 840 Pro SSD).
The system runs great ...
0
votes
1
answer
985
views
Mac Mini with lots of I/O errors and related issues, trouble identifying culprit
Setup:
Mac Mini 2011 with two drives:
SSD with OS X Yosemite and admin account home folder
HDD with my user home folder
Symptoms:
It began as many months of seemingly random slowdowns/beach balls, ...
2
votes
1
answer
2k
views
MacBook Pro 13" Mid 2010 is not seeing internal SATA HDD
I have a MacBook Pro 13" Mid 2010 that started to not see it's internal SATA HDD.
I can connect the HDD in question to the computer via SATA > USB adapter and it works fine (Mac can even boot from it ...
2
votes
1
answer
3k
views
Hard drive no longer accessible
This is a 4 TB hard drive formatted in Mac's Disk Utility as a single non bootable Exfat partition with the drive letter G. It worked fine before I decided to make a clone drive of my C bootable drive....