Compressor details

COMPRESSOR Features  A to S series compressors - Lubrication carried out by centrifugation - Motor cooling by means suction gas V-Z-W series compressors - Lubrication carried out by oil pump - Motor cooling by means suction gas Standard Supply • suction valve • discharge valve • rubber vibration absorbers • oil charge • nitrogen holding charge • oil sight glass • protection devices • spare parts set for suction and discharge valves • mounting instructions leaflet • electronic oil pressure switch (V-Z-W series)   Technical Data  • A series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° A 0.5 4 Y 0,37 0,50 3,95 2 A 0.5 5 Y 0,37 0,50 4,93 2 A 0.7 5 Y 0,55 0,75 4,93 2 A 0.5 4 Y 0,37 0,75 5,47 2 A 1 6 Y 0,75 1,00 5,47 2 A 1 7 Y 0,75 1,00 6,91 2 A 1.5 7 Y 1,10 1,50 6,91 2 A 1.5 8 Y 1,10 1,50 7,65 2   • B series     Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° B 1.5 9 Y 1,10 1,50 8,96 2 B 1.5 10 Y 1,10 1,50 9,84 2 B 2 10 Y 1,50 2,05 9,84 2 • C series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° C 2 11 Y 1,50 2,00 10,93 2 C 2 12 Y 1,50 2,00 12,05 2 C 3 12 Y 2,20 3,00 12,05 2 • D series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° D 2 11 Y 1,50 2,00 11,26 2 D 2 13 Y 1,50 2,00 13,84 2 D 3 13 Y 2,20 3,00 13,84 2 D 2 15 Y 1,50 2,00 15,86 2 D 3 15 Y 2,00 3,00 15,36 2 D 3 16 Y 2,00 3,00 16,39 2 D 4 16 Y 3,00 4,00 16,39 2 D 3 18 Y 2,00 3,00 17,93 2 D 4 18 Y 3,00 4,00 17,93 2 D 3 19 Y 2,00 3,00 19,12 2 • F series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° F 4 16 Y 3,00 4,00 16,39 2 F 4 19 Y 3,00 4,00 19,12 2 F 5 19 Y 3,70 5,00 19,12 2 F 4 24 Y 3,00 4,00 23,60 2 F 5 24 Y 3,70 5,00 23,60 2 F 5 25 Y 3,70 5,00 25,21 2 • Q series                       Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° Q 4 20.1 Y 3,00 4,00 19,77 4 Q 4 25 Y 3,00 4,00 24,69 4 Q 5 25 Y 3,70 5,00 24,69 4 Q 7 25 Y 5,50 7,50 24,69 4 Q 5 28 Y 3,70 5,00 27,88 4 Q 7 28 Y 5,50 7,50 27,88 4 Q 5 33 Y 5,50 7,50 32,66 4 Q 7 33 Y 5,50 7,50 32,66 4 Q 5 36.1 Y 3,70 5,00 35,86 4 Q 7 36.1 Y 5,52 7,50 35,86 4 • S series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° S 5 33 Y 4,00 5,50 32,80 4 S 7 33 Y 5,50  7,50 32,80 4 S 7 39 Y 5,50 7,50 38,25 4 S 10 39 Y 7,50 10,00 32,80 4 S 8 42 Y 5,50 7,50 41,32 4 S 12 42 Y 7,50 10,00 41,32 4 S 10 51 Y 7,50 10,00 50,43 4 S 15 51 Y 11,00 15,00 50,43 4 S 15 56 Y 11,00 15,00 56,00 4 S 20 56 Y 15,00 20,00 56,00 4 • V series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° V 15 59 Y 11,00 15,00 58,48 4 V 20 59 Y 15,00 20,00 58,48 4 V 15 71 Y 11,00 15,00 70,77 4 V 25 71 Y 18,00 25,00 70,77 4 V 20 84 Y 15,00 20,00 83,81 4 V 30 84 Y 22,00 30,00 83,81 4 V 25 93 Y 18,50 25,00 93,05 4 V 32 93 Y 23,50 32,00 93,05 4 V 25 103 Y 18,50 25,00 102,90 4 V 35 103 Y 26,00 35,00 102,90 4 • Z series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° Z 25 106 Y 18,50 25,00 106,16 6 Z 35 106 Y 26,00 35,00 106,16 6 Z 30 126 Y 22,00 30,00 125,72 6 Z 40 126 Y 30,00 40,00 125,72 6 Z 40 154 Y 30,00 40,00 154,38 6 Z 50 154 Y 37,00 50,00 154,38 6 • W series Model Nominal power Displacement Cylinders   KW HP m3/h (50Hz) n° W 40 142 Y 30,00 40,00 141,50 8 W 40 168 Y 30,00 40,00 167,60 8 W 50 168 Y 37,00 50,00 167,60 8 W 50 187 Y 37,00 50,00 186,10 8 W 60 187 Y 44,50 60,00 186,10 8 W 60 206 Y 44,50 60,00 205,80 8 W 70 206 Y 52,00 70,00 205,80 8 W 70 228 Y 52,00 70,00 227,77 8 W 75 228 Y 55,50 75,00 227,77 8 W 75 240 Y 55,50 75,00 239,02 8 W 80 240 Y 60,00 80,00 239,02 8 Model: Z 40 126 Y Type: Semi-hermetic piston compressors Producer: Frascold Series: Z Technical data Nominal motor power [kW/HP]: 30 / 40 Cylinder count: 6 Displacement [m³/h]: 125,72 RPM [min-1]: 1450 Weight net [kg]: 240 Weight gross [kg]: 262 Oil charge [dm³]: 7,5 Electrical data DOL Y Y PWS Y / Y Power supply [V/~/Hz]: 400V/3/50 400V/3/50 Locked rotor current [A]: 273 159,2 Max. operating current [A]: 71,9 71,9 Connections milimeters inches Suction linie: 67 2 5/8 Discharge line: 42 1 5/8 GS REFRIGERATION OIL SERIES  Property 3GS 4GS 5GS 3GS-D 4GS-D 5GS-D Color <1 <1.5 <2.0 0.5(<1.5) 0.5(<1.5) 0.5(<3.0) Density15.6℃,g/cc 0.91 0.916 0.92 0.91 0.916 0.92 Visc@40℃cSt 29.6 60.14 96.8 29.5 54.6 95.3 Visc@100℃cSt 6.46 6.46 9 4.36 6.45 9.2 Flash Point℃ 178 190 215 178 190 215 Pour Point℃ -43 -34 -29 -43 -34 -29 TAN 0.01 0.01 0.01 0.01 0.01 0.01 Analine Point℃ 175 183 197 79 84 91 Water content ppm 20(<35) 20(<35) 20(<35) 20(<35) 20(<35) 20(<35) Floc Point℃ -60 -50 -35 -57(-70) -50(-58) -39(-38) Emkarate RL Series POE Type Of Refrigerant Oil Technical Data   Index Measure Method RL 32H RL 46H RL 68H RL 100H RL 170H RL 220H Viscosity at 40°C cSt D445 32.5 45.3 65.5 98.8 170 222 Viscosity at 100°C cSt D445 5.8 7.1 9.3 12.7 17.0 19.5 Pour Point °C D97 -46 -46 -39 -36 -25 -22 Density at 20°C D1298 0.977 0.977 0.98 0.974 0.968 0.976 Flash Point °C E92 258 260 270 270 290 280 Water Content ppm E1064-85 <40 <40 <40 <40 <40 <40 Acid Value mg KOH/g * 0.02 0.02 0.02 0.02 <0.04 0.02 Colour Hazen D1209 60 70 70 125 250 100   Description Refrigeration Lubricant,RL100H/RL68H/RL32H/RL46H. Polyol ester lubricant for use with HFC refrigerant such as R-134a,R404a,R507,R407c,R410a,CFCs and HCFC refrigerants such as R22 and blends. Emkarate RL 68H is an ISO VG 68 synthetic polyol ester (POE) lubricant formulated specifically for use in refrigeration and air-conditioning compressors using HFC refrigerants.This product provides effective wear protection for steel and aluminium surfaces for increased system life and improved efficiency and is suitable for both initial fill and service fill.The combination of low temperature characteristics and unparalleled chemical and thermal stability enable the use of Emkarate RL 68H over a wide operating temperature rang B320SH Oil parameter limits This for R22 Viscosity cSt/40°C 320 Condensation temperature 60°C Evaporation +12.5 .. -15°C Maximum discharge gas temperature 120°C Oil is very hydroscopic so no moisture near it at all. What HFC refrigerants are used in Commercial Air Conditioning? The most popular hydro-fluorocarbon (HFC) refrigerants for new commercial air conditioning systems include R-410A, R-407C and R-134a.  As a facility manager or owner, it’s important that you understand these different refrigerants so that you can make informed decisions for your facility’s air conditioning system. Outlined below are the main differences between HFC refrigerants and additional context on why having the right refrigerant matters. R-22 Often referred to by a brand name, such as Freon® As of 2010, R-22 was discontinued for use in new air conditioning systems By 2015, the use of R-22 must be discontinued across the board R-22 is a hydro-chlorofluorocarbon (HCFC) that contributes to ozone depletion R-410A Often referred to by a brand name such as Puron®, Suva® 9100, or Genetron® AZ-20® Has been approved for use in new systems It is a hydro-fluorocarbon (HFC) that does not contribute to ozone depletion R-410A operating pressures are more than 50% higher than R-22 and R-410A systems require components capable of working at these higher pressures R-410A is the most common refrigerant for new light commercial unitary air conditioning systems R-407C Often referred to by a brand name such as Suva® 407C or Genetron® 407C R-407C is a hydro-fluorocarbon (HFC) that does not contribute to ozone depletion Of the higher temperature HFC options, R-407C most closely matches the operating characteristics of R-22 It is a high-glide refrigerant with lower efficiency, but provides the simplest conversion from R-22 due to its similar pressures R-134a Widely used in many air conditioning and refrigeration systems globally It is a hydro-fluorocarbon (HFC) that does not contribute to ozone depletion; also the first non-ozone-depleting fluorocarbon refrigerant to be commercialized It is a single-component refrigerant with no glide, featured in many large commercial screw chillers COMPRESSOR DETAILS Technical data OF Compressor of model CSH 8573-140 SI IP Displacement (2900 RPM 50 Hz) 410 m3/h 14488 CFH Displacement (3500 RPM 60 Hz) 495 m3/h 17491 CFH Weight 870 kg 1918 lb Max. pressure (LP/HP) 19 / 28 bar 275 / 400 psi Connection suction line DN 100 4 1/8'' Connection discharge line 76 mm - 3 1/8'' 76 mm - 3 1/8'' Oil type R22 B320SH (Standard) B320SH (Standard) Oil type R134a/R407C/R404A/R507A/R407A/R407F BSE170 (Option) BSE170 (Option) Oil type R1234yf/R1234ze(E)/R450A/R513A BSE170 (Option) BSE170 (Option) Motor data SI IP Motor voltage (more on request) 380-415V PW-3-50Hz 440-480V PW-3-60Hz UL Max operating current 246.0 A 246.0 A Winding ratio 50/50 50/50 Starting current (Rotor lo cked) 665.0 A D / 1023.0 A DD 716.0 A D / 1036.0 A DD ‘CSW’ series The compact screws of the new CSW series are optimized for use in R134a liquid chillers operating under low saturation discharge temperatures. As a result, they are compatible with systems with water cooled condensers, process cooling and systems with air cooled condensers operating under moderate climatic conditions. Thanks to their targeted development for these applications, their efficiency under full-load – and especially under part-load – was significantly increased. Additionally, the application limits under low saturation discharge temperatures were greatly expanded. Therefore, this series of compressors boasts ESEER/IPLV* values which greatly surpass the conventional international standards for compact screw compressors. Technical Data of compressor of model CSW 7583-80-38p SI IP Displacement (2900 RPM 50 Hz) 295 m鲁/h 10418 CFH Displacement (3500 RPM 60 Hz) 356 m鲁/h 12572 CFH Weight 530 kg 1169 lb Max. pressure (LP/HP) 19 / 28 bar 275 / 400 psi Connection suction line 76 mm - 3 1/8'' 76 mm - 3 1/8'' Connection discharge line 54 mm - 2 1/8'' 54 mm - 2 1/8'' Oil type R22 B320SH (Standard) B320SH (Standard) Oil type R134a/R407C BSE170 (Option) BSE170 (Option) Motor data SI IP Motor voltage (more on request) 380-415V PW-3-50Hz 440-480V PW-3-60Hz UL Max operating current 140.0 A 140.0 A Winding ratio 50/50 50/50 Starting current (Rotor locked) 350.0 A D / 585.0 A DD 350.0 A D / 585.0 A DD Technical Data of compressor of model 7593-90-40p parameter SI IP Displacement (2900 RPM 50 Hz) 336 m鲁/h 11866 CFH Displacement (3500 RPM 60 Hz) 406 m3/h 14321 CFH Weight 535 kg 1180 lb Max. pressure (LP/HP) 19 / 28 bar 275 / 400 psi Connection suction line 76 mm - 3 1/8'' 76 mm - 3 1/8'' Connection discharge line 54 mm - 2 1/8'' 54 mm - 2 1/8'' Oil type R22 B320SH (Standard) B320SH (Standard) Oil type R134a/R407C BSE170 (Option) BSE170 (Option) Oil charge 15,0 dm 527.9 fl oz WATER COOLED RECEIPROCATINFG CHILLER Shell and tube type heat exchanger Temperature control range: 3℃-30℃ Refrigerated capacity: 28500Kcal/h -414200 Kcal/h (10HP-150HP) Model WP-10E WP-12E WP-15E WP-20E WP-25E WP-30E WP-40E refrigerated capacity Kcal/h 28500 32500 38000 55000 656 00 75000 103000 KW 33.1 37.8 44.2 64.0 76.3 87.2 119.8 USRT 9.4 10.7 12.6 18.2 21.7 24.8 34.1 can control temp 3℃-30℃ power source 3φ-380V-50HZ(or select 60HZ) compressor power, kw 7.5 9 11.2 15 18.7 22.5 30 refrigerant type R-22 (or select R407c/R134a/R410A/R404A) condenser type shell and tube type water flow, L/min 118 135 170 250 300 350 450 pipe dia, inch 1-1/2 1-1/2 2 2 2-1/2 2-1/2 3 evaporator type shell and tube type water flow, L/min 95 115 150 190 250 300 400 dia, inch 1-1/2 1-1/2 2 2 2-1/2 2-1/2 3 protection device anti-phase & lack-phase protector, time delay, the protection of water shortage, the control and display of high and low pressure, the control and display of temperature, the protection of over load, the oil heating，anti-icy protector, the errors display and so on. reference outside H mm 1230 1270 1305 1520 1520 1450 1560 W mm 570 650 645 1060 1060 1100 1100 D mm 1200 1385 1505 1200 1200 1580 2050 　 　 　 Model WP-50E(Y) WP-60E(Y) WP-80EY WP-100EY WP-120EY WP-150EY capacity Kcal/h 136200 162700 221000 283500 331500 414200 KW 158.4 189.2 256.9 329.6 385.5 481 USRT 45.0 53.8 73.1 93.8 109.6 136.9 can control temp 3℃-30℃ power source 3φ-380V-50HZ(or select 60HZ) compressor power, kw 37.5 45 60 75 90 112 refrigerant type R-22 (or select R407c/R134a/R410A/R404A) circuits 1(2) 1(2) 2 2 2 2 condenser type shell and tube type water flow L/min 550 698 827 1148 1428 1750 pipe dia inch 3 3 4 4 4 5 evaporator type shell and tube type water flow L/min 560 571 747 933 1162 1400 pipe dia inch 3 3 4 4 4 5 protection device Anti-phase & lack-phase protector, time delay, the protection of water shortage, the control and display of high and low pressure, the control and display of temperature, the protection of over load, the oil heating , anti-icy protector, the errors display and so on. reference outside H mm 1560 1650 1750 1750 1750 1850 W mm 2200 2350 2650 3000 3000 3500 D mm 750 850 850 1000 1000 1000 　 　 　 THE COOLING IS BASED ON THE FOLLOWING CONDTIONS 1. CHILLED WATER INLET OUTLET TEMPERATURE：12/7℃ 2. COOLING WATER INLET OUTLET TEMPERATURE：30/35℃ WORKING RANGE 1. CHILLED WATER OUTLET TEMPERATURE：3-30℃ 2. COOLING WATER OUTLET TEMPERATURE：22-39 　 model WP-03 WP-04 WP-05 WP-06 WP-08 WP-10 WP-12 WP-15 refrigerated capacity kcal/h  5200 7900 11000 14000 22000 28500 32500 38000 KW 6 9.2 12.8 16.3 26.5 33.1 37.8 44.2 USRT 1.7 2.6 3.6 4.6 7.5 9.4 10.7 12.6  can control temp  °C + 3°C - + 40°C  power source 220V 3Ø 380V 50HZ(can select 60HZ)  compressor power  kw 1.5 2.25 3 3.75 6 7.5 9 11.25  refrigerant R-22（can select R407C/R134a/R404A/R410A)  in/out pipe inch 1 1 1 1 1-1/4 1-1/2 1-1/2 2  condenser shell and tube(can select shell pipe) cooling water L/min 40 48 55 70 100 118 135 170  water tank evaporator volume L 34 37 37 56 96 102 102 167 （can select shell pipe evaporator）  ice water L/min 20-80 30-100 40-100 50-100 80-120 100-160 120-160 150-250  ice water pump  kw 0.37 0.37 0.37 0.37 0.37 0.75 0.75 1.5 protection device time delay,the protection of water shortage,the control and display of high and low pressure,the control and display of temperature,the protectionof over load,the oil heating,the errors display and so on.  outside dimensions   H mm 820 955 890 970 1230 1235 1270 1305   W mm 435 490 530 530 570 570 650 645   D mm 795 810 810 880 1210 1200 1380 1505 　 model WP-20 WP-25 WP-30 WP-40 WP-50 WP-60 WP-80 WP-100 refrigerated capacity kcal/h 55000 65600 75000 103000 136200 162700 221000 283500 KW 64 76.3 87.2 119.8 158.3 189.2 256.9 329.6 USRT 18.2 21.7 24.8 34.1 45 53.8 73.1 93.8 can control temp   °C + 3°C - + 40°C  power source 3Ø 380V 50HZ(can select 60HZ)  compressor power  kw 15 18.75 22.5 30 37.5 45 60 75  refrigerant R-22（can select R407C/R134a/R404A/R410A)   in/out pipe inch 2 2-1/2 2-1/2 3 3 3(4) 4 4  condenser shell and tube(can select shell pipe) shell pipe  cooling water L/min 250 300 350 450 550 698 827 1148  water tank evaporator volume L 240 240 470 600 600 shell pipe （can select water tank evaporator evaporator） （can select shell pipe evaporator）   ice water L/min 200-250 250-350 300-350 400-560 500-560 571 747 933  ice water pump  kw 1.5 2.2 2.2 3.75 3.75 5.6 7.5 7.5  protection device time delay,the protection of water shortage,the control and display of high and low pressure,the control and display of temperature,the protectionof over load,the oil heating,the errors display and so on.  outside dimensions  H mm 1425 1520 1450 1480 1450 1650 1750 1750  W mm 955 1060 1100 1100 1250 2650 2650 3000  D mm 1255 1200 1580 2050 2100 950 1100 1100  Model WP-120 WP-160 WP-180 WP-200 WP-240 WP-280 WP-320 refrigerated capacity kcal/h 331500 453200 505400 588500 663100 801500 917500 KW 385.5 527 587.6 658.7 771 932 1066.8 USRT 109.6 150 167.1 187.3 219.3 265 302.5  can control temp   °C 3°C - + 40°C  power source 3Ø 380V 50/60HZ  compressor power  kw 　90 120 135 150 180 210 240  refrigerant R-22（can select R407C/R134a/R404A/R410A)  condenser/evaporator shell pipe  in/out pipe inch 　4 5 5 6 6 6 6   cooling water L/min 　1428 1838 2107 2527 2859 3250 3821  standard ice water L/min 　1162 1496 1714 1934 2326 2750 3010  protection device time delay, the protection of water shortage, the control and display of high and low pressure, the control and display of temperature, the protection of over load, the oil heating, the errors display and so on. outside dimensions  H mm 　1750 2000 2000 2250 2250 2500 2500  W mm 　3000 3500 3500 4000 4000 4500 4500  D mm 　1100 1350 1350 1500 1500 1850 1850 The cooling based on the following conditions   1. ice water in/out temp：12/7℃   2. cooling water in/out temp：30/35℃ Hydro hem 204   Hydrochem 204 is an alkaline descalant used for removal of siliceous deposits from boiler and heat exchanger pipe lines.