Thank You Card - Stamp With Laurie

Just a Little Note Card

August 14, 2024 Leave a comment

Just a Little Note - a masculine card with a pear on it — Just a Little Note Card

Hello Crafty Friends! Laurie here again! I am sharing my Just a Little Note Card using the Penciled Pear Stamp Set by Stampin’ Up! Since masculine cards are so hard to make, I decided to create a masculine card with this stamp for a swap. In fact, I made 2 different cards with similar layouts.

Two cards with pears on them — My Two Variations

The Details of My Just a Little Note Card

For my card, I knew that I wanted to watercolour the pear with my Water Painters and ink that I squished onto my glass mat. Such a fun technique that allowed me to pick up as much ink as I needed!

So, I heat embossed in black my stamped pear on watercolor paper. Tip: the heat embossing created a raised edge that kept the ink in the lines. Once that was done, I water coloured the pear in different colours since they can come in various shades of colours until they ripen. To add interest, I picked up the different inks on my brush and splattered it into onto the watercolor paper.

I matted the finished water coloured piece onto Old Olive and Basic White card stock to create my focal point.

Close Up of Pear — Close Up of Focal Point

The sentiment was stamped in Black, die cut out and linen thread was added beneath it. The pears stamp was stamped multiple times in Crushed Curry onto Crush Curry card stock to add even more interest. This was matted with Basic White.

Next, I embossed the Early Espresso card stock with Timber 3D Embossing Folder to add to the masculine feel of my card.

The finishing touch was Adhesive-Backed Textured Dots in the opposite corner from my sentiment. Don’t you think these dots look like golf balls (hmmm ideas! lol!)? Very masculine!

Supplies:

Stamps/Bundles/Dies: Penciled Pear Stamp Set (163526), Stylish Shapes Dies (159183)

Inks: Early Espresso Classic Stampin’ Pad (147114), Crushed Curry Classic Stampin’ Pad (147087), Old Olive Classic Stampin’ Pad (147090), Cajun Craze Classic Stampin’ Pad (147085), VersaMark Ink (102283), Tuxedo Black Memento Ink Pad (132708)

Paper: Basic White Thick Cardstock (159229), Early Espresso (119686), Basic White (159276), Crushed Curry (131199), Old Olive (100702), Fluid 100 Watercolor Paper (149612)

Accessories: Timber 3D Embossing Folder (156406), Adhesive-Backed Textured Dots (163338), Linen Thread (104199), Water Painters (151298), Basics Embossing Powder (165679), Heat Tool (129053), Embossing Additions Tool Kit (159971), Stampin’ Glass Mat Studio (163987), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Basic White Thick Cardstock:
- 8 ½” x 5 ½” scored at 4 ¼”
Early Espresso:
- 5 3/8” x 4-1/8”
Basic White (3 pieces):
- 4-1/8” x 2-3/8”
- 3 ½” x 3”
- Scrap for Sentiment
Crushed Curry:
- 4-1/8” x 2 ¼”
Old Olive:
- 2-7/8” x 3-3/8”
Watercolor Paper:
- 2 ¾” x 3 ¼”

More Information on My Just a Little Note Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store

Painted Petals Centre-Step Cards

July 25, 2024 2 Comments

Hello Crafty Friends! Laurie here again! I am sharing my Painted Petals Centre-Step Cards using the July Painted Petals Paper Pumpkin Kit by Stampin’ Up! When I saw this kit, I was in love with it, especially how the die cuts all layer on top of the card fronts! So many ideas came flooding into my head! Lol! In fact, I created five alternative cards using the Kit. But, first, here are the three cards that the kit makes. They are so pretty!

The Details of My Painted Petal Centre-Step Cards

For my three alternative cards, I decided to use my favourite fun fold, a centre-step! I kept the extra products down as much as possible by only adding card stock and the Eyelet 3D Embossing Folder.

For the rose flower card, I decided to use the Eyelet 3D Embossing Folder for the various strips to add some interested. I also decided to use the Old Olive card backing from one of the cards instead of the matching card front for variation.

Pink Flowers Centre-Step Card — Rose Centre-Step Card

For the daisy flower card, I had some of the Old Olive card backing from the previous card. So, I used it for the two side strips. The bottom strip was left over from the front of the card when I trimmed it down. I love that you can see the splotches on it! I decided to use the matching card front for the centre panel and layered the die cut on top of this panel.

For the poppy flower card, I used all the bits from the card base. Since the poppy die cut was longer than the others, I decided not to trim down the centre panel as much, leaving the sides of the bottom panel free for the sentiment on one side and the embellishments on the other.

Measurements of My Painted Petals Centre-Step Cards:

Card Base:
- 11″ x 4 ¼” cut/scored according to template below
Centre Panel:
- 2-1/8″ x 4-3/8″
2 Side Strips:
- 7/8″ x 4-3/8″
Bottom Strip:
- 7/8″ x 4-1/8″

More Information on My Painted Petals Centre-Step Cards

Stay tune for my other alternative cards using this kit. I made two more fun folds cards, but different than these ones.

Downloadable Centre-Step Card Template

To download a PDF of the Centre-Step Card Template, please click here or on the picture.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Best Father’s Day Card

June 7, 2024 Leave a comment

Hello Crafty Friends! Laurie here again! I am sharing my Best Father’s Day Card using The Best There Is May 2024 Paper Pumpkin by Stampin’ Up!

The Details of My Alternative Cards

I had so much fun playing with the kit that I made the 3 cards in the kit. This kit’s wood grain textured designs are perfect for making masculine and all-occasion cards.

3 cards from the Kit — Cards in The Best There Is May 2024 Paper Pumpkin

In addition to them, I also made 6 alternative cards that included 3 thank you cards, a sympathy card, a birthday card and a Father’s Day card. For 4 of the cards, I also use the Add-on Thanks & Beyond Dies. Please see them below.

There thank you cards and sympathy card — My Alternative Cards

The Details of My Best Father’s Day Card

For my final two cards, I thought I would go into more in-depth details. I decided to create a Flippy Fun Fold card that was sure to wow! I made a Father’s Day card using the stamp in the kit and a birthday card using the Throughout the Year Stamp Set.

A Father's Day Card and Birthday Card — Best Father’s Day Card

The largest of the circles from the Stylish Shaped Dies fitted the preprinted tree circle perfectly with a nice border! So, I die cut the circle from the Misty Moonlight card base towards the top to leave enough space for my sentiment. Next, I die cut a circle from Early Espresso on which I mounted the preprinted tree circle.

Inside of My Best Father’s Day Card

For my inside, I cut and scored a Basic Beige card base according to the instructions below. I adhered this card base to the Misty Moonlight card base with the larger panel at the back and the smaller tab panel at the front. Note: make sure you only add glue to the top and bottom of the small tab panel. You will see the smaller tab panel showing through the die cut circle. Using my Paper Snips, I cut where the small tab panel over lapped the circle on the front and adhered that to the back of the larger panel thus hiding it.

Next, I decorated the inside with the striped paper and the Early Espresso mats. For the Basic White panel, I stamped in Early Espresso the trees that came in the Kit to match the trees on the preprinted circle and then matted it with the Early Espresso mat.

Once the inside was done, I closed my card, added glue to only the part of the panel that can be seen through the die cut circle and adhered the Early Espresso circle in place.

Finally, I added a couple of strips to my sentiment piece to tie in the inside papers and to balance out my circle focal point.

The finishing touch was to add some Adhesive-Backed Textured Dots to my card.

Supplies:

Stamps/Bundles/Dies: The Best There Is Paper Pumpkin Refill Kit (165001), Throughout the Year Stamp Set (162312), Thanks & Beyond Dies (164397), Stylish Shapes Dies (159183)

Inks: Misty Moonlight Classic Stampin’ Pad (in Kit), Early Espresso Classic Stampin’ Pad (147114)

Paper: Basic White (159276), Early Espresso (119686), The Best There Is Paper Pumpkin Refill Kit (165001)

Accessories: Adhesive-Backed Textured Dots (163338), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Fop View of Card Showing Folds — Fop View of Card Showing Inside Folds

Measurements:

Misty Moonlight Card Base (from Kit):
- 8 ½” x 5 ½” scored at 4 ¼”
Basic Beige Card Base (from Kit):
- 6-7/8 x 5 ½” scored at 2-1/8”, 4 ¼” and 6-3/8”
Basic White:
- 1-5/8” x 5”
Early Espresso:
- 1-7/8” x 5 ¼” (3 pieces)
- 3 ¼” x 3 ¼”
The Best There Is Paper Pumpkin Refill Kit:
- 1-5/8” x 5” (Stripe Paper – 2 pieces)
- ½” x 3” (Basic Beige Strip from Card Base)
- ¼” x 3 ½” (Stripe Paper)
- Preprinted Tree Circle

More Information on My Best Father’s Day Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store

My Let’s Catch Up Card

May 21, 2024 4 Comments

Hello Crafty Friends! Laurie here again! I am sharing My Let’s Catch Up Card using the Latte Love Bundle and the Coffee with Friends Stamp Set by Stampin’ Up! I thought it would be fun to combine them onto one card! They were just meant to be together! Lol!

The Details of My Let’s Catch Up Card

For my card, I decided to create a “polaroid” of the girls like a reminder for them to get together and catch up. As an alternative to colouring them, I embossed them with white embossing powder on Calypso Coral. Then, I die cut them out using the largest stitched square die from the Stylish Shapes Dies. I used Early Espresso for my first card but found it too dark (see top right card in photo below). So, I switched it up with the Calypso Coral. I tweaked another card (bottom) until I landed on my finished design (top left).

Since I made a “polaroid”, I had the perfect space to add the Lost Lagoon sentiment. For the Pecan Pie coffee drips, I stamped off before stamping them onto the Basic White so that they didn’t interfere with the other elements.

I loved that one of the Latte Love Dies cut out the coffee cups in the DSP! I made this card for a swap, and I had different coffee cups on my cards!

Next, I added a plaid flag with the Stylish Shapes Dies that had Calypso Coral in it to tie in my colour scheme and to balance the coffee cup.

I decided to place my focal point at an angle to fit all my elements onto the card. I layered this onto a piece of Pecan Pie that I embossed with the Painted Texture 3D Embossing Folder. You could also use the new So Swirly Embossing Folder, but I didn’t have that yet. Lol! Another piece of the DSP was placed so that it just peeked out from behind the focal point and tied in the Lost Lagoon colour.

Finally, I finished the card with a few Adhesive-Backed Swirl Dots to add a fun element to my card.

Supplies:

Stamps/Bundles/Dies: Latte Love Bundle (163461), Coffee with Friends Stamp Set (161389), Stylish Shapes Dies (159183)

Inks: Lost Lagoon (161678), Pecan Pie (161665), VersaMark Ink (102283)

Paper: Thick Basic White (159229), Lost Lagoon (133679), Pecan Pie (161717), Basic White (159276), Calypso Coral (122925), A Little Latte Designer Series Paper (163453)

Accessories: Adhesive-Backed Swirl Dots (163464), Painted Texture 3D Embossing Folder, (154317), Basics Embossing Powder (165679), Heat Tool (129053), Embossing Additions Tool Kit (159971), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Thick Basic White:
- 8 ½” x 5 ½” scored at 4 ¼”
Lost Lagoon:
- 5 ¼” x 4”
Pecan Pie:
- 3-7/8” x 5-1/8”
Basic White:
- 4” x 3 ¼”
Calypso Coral:
- 3” x 3”
A Little Latte Designer Series Paper (3 pieces):
- 4” x 3 ¼”
- Scrap for flag
- One of the cups

More Information on My Let’s Catch Up Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

My Lantern Window Card

April 23, 2024 2 Comments

Hello Crafty Friends! Laurie here again! I am sharing My Lantern Window Card using the Lighting the Way Stamp Set and the Lighting the Way Dies by Stampin’ Up!

The Details of My Lantern Window Card

For my card, I decided to create a Window Double Open Fun Fold that allowed the gorgeous Perennial Lavender Designer Series Paper to show through behind the beautiful lantern.

First, I stamped the trail of lights in Gorgeous Grape on the card base for a tone-on-tone look.

Next, I used with the Deckle Circle Dies to create my window frame. Tip: add glue along the edge of the larger Crumb Cake die cut circle and adhere to the Gorgeous Grape card base before cutting out the circle centre. Then cut out both at the same time so that everything lines up.

I die cut the fireflies in White Glimmer Specialty Paper and brushes some Crushed Curry to their tails to make them glow. I placed the two on the front of the card following the trail of lights and one on the inside showing through the window.

Inside of Card showing floral paper — Inside of Card

The lantern was die cut twice in the Holographic Paper for the front and for the back to give the lantern a finished look from inside. I added some vellum to the inside of the lantern on which I stamped the fire glow in Crushed Curry.

The embossed sentiment helped to hold the lantern in place while a bow of Linen Thread and a glue dot anchored the top of the lantern.

For the inside of the card, I created the double open part by adhering the Perennial Lavender Designer Series Paper to folded Basic White card stock. Thus, creating a perfect place to write your message.

Finally, to add a bit more magical shimmer, I used the Iridescent Rhinestone Basic Jewels scattered around my lantern. These are also retiring. So, make sure you get them before they are gone.

Supplies:

Stamps/Bundles/Dies: Lighting the Way Stamp Set (160868), Lighting the Way Dies (160496), Deckled Circle Dies (162286)

Inks: Gorgeous Grape (147099), VersaMark Ink Pad (102283), Crushed Curry (147087)

Paper: Gorgeous Grape (146987), Basic White (159229), Crumb Cake (120953), Starry Sky (159263), Vellum (101856), White Glimmer Specialty Paper (163769), Holographic Trio Specialty Paper (161744), Perennial Lavender Designer Series Paper (162593)

Accessories: Linen Thread (104199), Iridescent Rhinestone Basic Jewels (158130), Basics Embossing Powder (155554), Heat Tool (129053), Blending Brushes (153611), Paper Snips (103579), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Gorgeous Grape:
- 5 ½” x 8 ½” scored a 4 ¼”
Basic White:
- 5 ¼” x 8” scored at 4” (inside of card)
Crumb Cake:
- 4” x 4”
Holographic Trio Specialty Paper (Lantern) x 2:
- 3 ½” x 2”
Starry Sky:
- Scrap
Vellum:
- Scrap
White Glimmer Specialty Paper:
- Scrap
Perennial Lavender DSP:
- 5” x 3 ¾”

More Information on My Lantern Window Card

I also made a split panel card using the same stamp set/dies and incorporated the lantern into it. For more information on this card, please click here.

Light the Way Card - a card with a lantern and fireflies on it — Light the Way Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

You Light the Way Card

April 1, 2024 Leave a comment

Hello Crafty Friends! Laurie here again! I am sharing my Light the Way Card using the Lighting the Way Stamp Set and the Lighting the Way Dies by Stampin’ Up! These are both set to retire end of this month. So, get yours while you can!

The Details of My Light the Way Card

This card was created for a swap, and I thought a split panel card with the lantern connecting the two pieces would be fun! I used a Window Sheet for the transparent window to give added stability.

For my card, I went with the Stargazing Designer Series Paper for the top half for the sky and the Countryside Inn Designer Series Paper for the bottom half for the ground. I die cut the fireflies in White Glimmer Specialty Paper and brushes some Crushed Curry to their tails to make them glow. Next, I embossed a trail of lights in the wake of the firefly on the Stargazing Designer Series Paper.

The lantern was die cut twice. Once in the Holographic Paper for the front and again in Basic Black for the back to give the lantern a finished look from inside. I added some vellum to the inside of the lantern on which I stamped the fire glow in Crushed Curry. A bow of Linen Thread added to the top of the lantern finished it off.

Tip: for the sentiment, adhere the Basic White piece inside and then using the Night of Navy card base pieces for placement, stamp the sentiment before decorating them.

Finally, to add a bit more magical shimmer, I used the Iridescent Rhinestone Basic Jewels scattered around my lantern. These are also retiring. So, make sure you get them before they are gone.

Close Up of Lantern on Card — Close Up of Lantern

Supplies:

Stamps/Bundles/Dies: Lighting the Way Stamp Set (160868), Lighting the Way Dies (160496)

Inks: Night of Navy (147110), VersaMark Ink Pad (102283), Crushed Curry (147087)

Paper: Night of Navy (100867), Basic White (159229), Basic Black (121045), Vellum (101856), White Glimmer Specialty Paper (163769), Holographic Trio Specialty Paper (161744), Window Sheets (142314), Stargazing Designer Series Paper (161175), Countryside Inn Designer Series Paper (161467)

Measurements:

Night of Navy:
- 4 ¼” x 9 ½” scored a 5 ½”, fold and trim one side at 2”. Taking the separate piece, trim 2” off keeping this for the bottom panel.
Basic White:
- 5 ¼” x 4” (inside of card)
Window Sheet:
- 5 ¼” x 4”
Holographic Trio Specialty Paper (Lantern):
- 3 ½” x 2”
Basic Black (Lantern):
- 3 ½” x 2”
Vellum:
- Scrap
White Glimmer Specialty Paper:
- Scrap
Stargazing DSP:
- 4” x 1 ¾”
Countryside Inn DSP:
- 4” x 1 ¾”

More Information on My Light the Way Card

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store

You’re Stellar Wobble Card

July 5, 2023 Leave a comment

A card with an Astronaut and planet on it. — You’re Stellar Wobble Card

Hello Crafty Friends! Laurie here again! I am sharing my You’re Stellar Wobble Card using the Stargazing Suite Collection by Stampin’ Up! This Collection includes the Reach for the Stars Stamp Set, Reach for the Stars Dies and Stargazing 12” x 12” Designer Series Paper.

The Details of My Card

My card was for a swap, and I decided to make a fun faux centre-step card to allow enough room for the astronaut and a planet to fit on my centre panel. I used the measurements from my faux centre-step template which I have included at the end of this post.

When I saw this Suite in the Annual Catty, I knew that I wanted to make a wobble card as well! They are so fun and interactive! I bought the Mini Action Wobble on Amazon.ca, but you could easily make your own by using a piece of bendable wire and wrap it around a pencil. Then, secure one end to your wobble piece and the other end to the card base.

Astronaut in Action

Since I made this card for a swap, I needed several planets, but only a couple fit the planet die and the rings die. I really wanted to use the ring die with silver foil paper! I thought it would add some cosmic shimmer along with the die cut stars! So, I fudged it. Tip: if you die cut the larger planets, make sure that the shadow is showing in the centre of the die. This gives it a realistic 3D look.

All Cards with Different Planets — Swap Cards with Different Planets

I decided to stamp my astronaut and sentiment in Basic Gray since there was already a lot of black to my card. Besides, it was a good alternative to colouring the astronaut since I would have used Smoky Slate to colour his shadows and left most of him white anyways. So, this did it for me!

Tip: to figure out where to place glue for the centre panel, I used my grid paper a pencil to mark the section.

The only embellishments were three Classic Matte Dots in each colour tying in my colour scheme. Of course, they had to be in a row showing my Star Trekkie side of me! Lol!

I made another card as well for a friend. This time I added the retired Shimmery Crystal Effects to the astronaut’s helmet. So fun!

Supplies:

Stamps/Bundles/Dies: Stargazing Suite Collection (161189)

Inks: Basic Gray (149165)

Paper: Basic Black (121045), Basic White (159276), Lemon Lime Twist (144245), Silver Foil 12” x 12” Specialty Pack (156457), Stargazing 12” x 12” Designer Series Paper (in Collection)

Accessories: Classic Matte Dots (158146), Multipurpose Liquid Glue (110755), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683), Grid Paper (130148), pencil, Mini Action Wobble (from Amazon.ca)

Multiple cards with astronaut and planet on then — Swap Cards

Measurements:

Basic Black: (2 pieces)
- 8 ½” x 5 ½” cut/scored according to template below
- 8 ½” x 3” cut/scored according to template below
Basic White: (4 pieces)
- Sentiment: 2 ¼” x ½”
- Astronaut: 4” x 2”
- Centre Panel: 4-1/8” x 2-5/8”
- Back Panel: 3-5/8” x 3-1/8”
Lemon Lime Twist
- Scrap
Silver Foil (2 pieces):
- 2 ½” x 1”
- Stars: Scrap
Stargazing 12” x 12” Designer Series Paper (3 pieces):
- Centre Panel: 4” x 2 ½”
- Back Panel: 3” x 5 ¼”
- Planet

More Information on My You’re Stellar Wobble Card

Downloadable Faux Centre-Step Template

To download a PDF of the Faux Centre-Step Template, please click here or on the picture.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

Sweet Macaron Card

April 20, 2023 Leave a comment

A thank you card with cookies and Eiffel Tower on it — Sweet Macaron Card

Hello Crafty Friends! It’s Laurie here! I am sharing my Sweet Macaron Card using Macaron Bouquet Stamp from Stamping Bella.

I was asked to create a card for a Spring Challenge for a group that I am a member. There were 4 mood boards from which to choose. For my card, I decided to go with the Springtime in Parisian Mood Board.

The Details of My Card

Paris is one of my favourite places to go! I love macarons! And I love the colours that were on the mood board! So, I went with the Macaron Bouquet by Stamping Bella and coloured them with my Copic markers in a light bright pink with a mint green ribbon pulling from the mood boards colours.

A mood board with images of Paris and France — Parisian Spring Mood Board

Since, this was a Parisian card, the die cut Eiffel Tower rubbed with Brushed Iron Wax to bring out the details was a must have. The Eiffel Tower to me is an iconic symbol of Paris!

Spring in Paris is something else, especially with its beautiful cherry blossoms! So, I decided to create my own cherry blossoms with a punch in layers of pinks and whites to match my Dainty Diamonds pink embossed paper. I added pearls to the flower centres and coloured a few pearls with my RV Copic marker for the white flowers.

Of course, since my card is Parisian inspired, I must have some French on it and the word “merci” fitted perfectly down the side of my focal point.

I trimmed the sentiment that came with the stamp down so that it would fit my card from:

“It is the sweet, simple
things of life
which are the real ones after all
~ Laura Ingalls Wilder.”

to just using the first two lines. I didn’t want it to cover too much of the Eiffel Tower.

A scattering of Mint Macaron Gems tied in my colour scheme and added some sparkle. I also used Clear Wink of Stella on the macarons to add more sparkle.

————————–

Copic Markers:

Macaron: RV0000/RV000/RV00/RV02
Filling: E30/E331/E33
Ribbon: G00/G03/G03
Ground: E30/E31/E33
Pink Pearls: RV02

Close Up of the cookies on the card — Close Up of Macaron Bouquet

————————–

Card Recipe for My Sweet Macaron Card:

Macaron Bouquet, Stamping Bella
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Dainty Diamonds Embossing Folder, Stampin’ Up!
HYDRANGEA Punch 3 in 1 Flowers Trio Flower, Martha Stewart EK Success
Eiffel Tower Die, Marianne Design Craftables Dies
Parisian Dies, Stampin’ Up!
Brushed Iron Metallique Wax, Art Alchemy
Pearl Basic Jewels, Stampin’ Up!
Genial Gems, Stampin’ Up!
Clear Wink of Stella, Stampin’ Up!
Kraft, Pink Pirouette, Mint Macaron, Basic White, and Basic Black Stock, Stampin’ Up!

Finished card size: 5 ½” x 4 ¼”

————————–

To view my other Copic marker cards, please click here.

Hope you liked my Sweet Macaron Card using Macaron Bouquet by Stamping Bella!

Thank you for stopping by!

Hugs,
Laurie

A Cup of Thanks Card

May 24, 2022 Leave a comment

A Card with Tea Cups on it — A Cup of Thanks Card

Hello Crafty Friends! Laurie here again! I am sharing A Cup of Thanks Card using the Cup of Tea Bundle by Stampin’ Up! I loved the idea of stacking the teacups in different colours!

Details of My Card

For my card, I wanted to highlight the new 2022-24 In Colors and what better way than with the Tea Boutique Designer Series Paper that incorporates all the new colors in its pretty designs! I also used the In Color 2022–2024 Designer Series Paper for two of my teacups. Tip: Since the DSP is double-sided, I turned the middle teacup to face the opposite way. For the bottom teacup, I love the combination of Parakeet Party and Starry Sky together. So, I used the stackable die cuts to create my teacup. To highlight my teacups, I used a stitched scallop rectangle in Basic White.

I’m so happy that Stampin’ Up! has released new stitched circle/square dies and I couldn’t rest using one of the circles for my Starry Sky sentiment! Don’t you just love the Fun Flowers Resin Shapes and they come in Parakeet Party as one of the colours!

I thought placing the Tea Boutique 6″ x 6″ Designer Series Paper on an angle behind the focal point was a fun idea. The Stitched Greenery Die with its tone-on-tone created a subtle background that doesn’t distract from the focal point, but still adds interest.

I added a stamped die cut lemon wedge and a Sweet Sorbet Glimmer heart to continue my caring thank you theme.

Close Up of the tea cups on card — Close Up of Teacups on My Card

Supplies:

Stamps/Bundles/Dies: Cup of Tea Bundle (158667), Scalloped Contours Dies (155560), Stylish Shapes Dies (159183), Stitched Greenery Die (155451)

Inks: Starry Sky Classic Stampin’ Pad (159212), Crushed Curry Classic Stampin’ Pad (147087)

Paper: Basic White Thick Cardstock (159229), Basic White (159276), Orchid Oasis (159267), Parakeet Party (159259), Starry Sky (159263), 2022–2024 In Color 6″ x 6″ Glimmer Paper (159246), In Color 2022–2024 6″ x 6″ Designer Series Paper (159253), Tea Boutique 6″ x 6″ Designer Series Paper (158659)

Accessories: Fun Flowers Resin Shapes (159123), Bone Folder (102300), Stampin’ Dimensionals (104430), Mini Stampin’ Dimensionals (144108), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Basic White Thick Cardstock:
- 5 ½” x 8 ½” scored a 4 ¼”
Orchid Oasis: 5 ¼” x 4”
- 1 5/8” x 1 5/8”
Basic White:
- 3 ¾” x 2 ½”
- Scraps for Lemon
Parakeet Party: 2 ¼” x 1 ½”
Starry Sky: 2 ¼” x 1 ½”
Sweet Sorbet Glimmer Paper:
- Scrap
Tea Boutique Designer Series Paper
- 5” x 2”

More Information on A Cup of Thanks Card:

For more of my Stampin’ Up! cards, please click here.

More information on the 2022-24 In Colors and the Tea Boutique 6″ x 6″ Designer Series Paper: https://youtu.be/3nqVmRjyy1o

Behind the Scenes (Facebook Live): In Colors with Sara Douglas and Holly Anderson: https://fb.watch/dd4_58YdPA/

You will find the other items listed above in my online store.

My Summer Dreams Card

August 14, 2021 Leave a comment

Hello Crafty Friends! It’s Laurie here! I can’t believe that Summer is almost over! So, in the hopes of making the summer last a little bit longer, I am sharing My Summer Dreams Card as my Design Team Card for Conie Fong Art & Design. My card is using the sweet Summer Dreams. This image would be perfect for so many occasions like Birthday, Mother’s Day, Thinking of You, Wedding to name just a few!

Details of My Card

For my card, I coloured this sweet image with my Copic markers to match the beautiful Botanical Tea paper by Graphic 45. I had a lot of fun colouring all those waves and curls in her hair and look at those pleats! Omgoodness! Such colouring fun!

I have been wanting for a while to use the Stitched Greenery Dies by Stampin’ Up! and thought that they would make a perfect subtle mat for my focal point. I die cut the Botanical Tea paper and my coloured image with the Labels Seventeen in two consecutive layering dies. I used my Blending Brush to add some Vintage Photo ink to the edges of all my paper and die cuts. Next, I turn the larger one on its side and punched two holes in it at one end and threaded ribbon through the holes for an unexpected touch.

To add to the botanical theme, I added a leaf trinket so that it looks like it is attached to the ribbon. I found a paper flower that matched my colouring perfectly. To add some matching blue embellishments, I coloured rhinestones with my B34 Copic markers and scattered them here and there.

————————–

Copic Markers:

Skin: E000/E00/E21/E11/E04/R20
Hair: YR31/E33/E35/E37
Pinks: R81/R83/R85/R89
Blues: B34/B23/B32
Browns: E70/E71/E74/E77
Flowers: B34/B32/R85/R81/Y17
Stems: YG03/YG63/YG67/G99
Sky: BG000/BG0000
Rhinestones: B34

————————–

Card Recipe for My Summer Dreams Card:

Summer Dreams, Conie Fong Art & Design
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Botanical Tea Paper Pad, Graphic 45
Pink Buttons 6” x 6.5” Card Stock Paper, Recollections, Michaels Arts & Crafts
Nestabilities Labels Seventeen, Spellbinders
Stitched Greenery Dies, Stampin’ Up!
¼” Handheld Hole Punch, In my Stash
Marina Mist ¼” Cotton Ribbon, Stampin’ Up!
Tip Top Taupe Dotted Lace Trim, Stampin’ Up!
Bird Ballad Trinkets, Stampin’ Up!
Paper Flowers, Recollections, Michaels Arts & Crafts
Vintage Photo Distress Inks, Ranger
Blending Brushes, Stampin’ Up!
Basic Rhinestone Jewels, Stampin’ Up!
White Gelly Roll Pen
Marina Mist Card Stock, Stampin’ Up!

Finished card size: 5.75” x 5.75”

————————–

To view my other Conie Fong Art & Design cards, please click here.

Hope you like my Design Team Inspiration Card using
Summer Dreams for Conie Fong Art & Design!

Thank you for stopping by!

Hugs,
Laurie

My Twisty Thank You Card

August 10, 2021 2 Comments

My Card Front — My Twisty Thank You Card

Hello Crafty Friends! I am excited to share My Twisty Thank You Card that I made using the beautiful Hand-Penned Designer Series Paper by Stampin’ Up! I made a similar card at a retreat and thought that it would be a perfect way to showcase this gorgeous DSP while providing an interactive fun fold!

Don’t you just love that when you open the card you get the first set of sentiments and then you keep opening and the sentiments flip to see the other side of them. When the card is fully open, you get all three sentiments displayed.

My Twisty Thank You Card in Action

The Details of My Card

For my card, I used the Hand-Penned Petals Bundle which includes the Hand-Penned Petals Stamp Set and the matching Penned Flowers Dies by Stampin’ Up! Since I needed 3 sentiments that went together, I used the Dragonfly Garden Stamp Set as well. I have included my Twisty Card Template that you can download at the end of this post.

The Front of My Card

I stamped the colours of Highland Heather, Mint Macaron, Daffodil Delight and Blushing Bride for my flowers which matched the DSP and die cut them out with the matching dies. The Daffodil Delight piece of DSP helped to give a pop of colour to draw the eyes to the stamped flowers. I die cut the tag from the DSP as well. Love the Tailor Made Tags! They are so versatile! For my ribbon, I wanted it to match the colours of my card. So, I used my Dark Highland Heather Stampin’ Blend to colour the ribbon. This is a great way to add matching accents to your card!

Tip for using Markers on Ribbon — Tip for Colouring Ribbon with Stampin’ Blends

I found that the DSP is quite busy. So, to make my focal point stand out, I added a Basic White scallop cut piece underneath it to help ground it. A couple of Highland Heather pearls and a Mint Macaron Genial Gem tie in the colours of my card.

Close Up of My Card — Close Up of the Front of My Twisty Thank You Card

Inside of My Card

For the inside of my card, I added two of the neutral simple patterns to the inside folds and then attached the sentiment. I made sure that as you flip it, the sentiments made sense: “For a true friend” “You are an inspiration” Thank you for your kindness”. I added some DSP to the back of the sentiment pieces since you see the backs as they flip. Tip: adhere top and bottom sentiment pieces and then the middle to get even placement between the pieces.

Supplies:

Stamps/Bundles/Dies: Hand-Penned Petals Bundle (155492), Dragonfly Garden Stamp Set (154411), Tailor Made Tags Dies (155563), Scalloped Contours Dies (155560)

Inks: Tuxedo Black Memento Ink Pad (132708), Highland Heather Classic Stampin’ Pad (147103), Mint Macaron Classic Stampin’ Pad (147106), Daffodil Delight Classic Stampin’ Pad (147094), Blushing Bride Classic Stampin’ Pad (147100)

Paper: Highland Heather (146986), Daffodil Delight (119683), Basic White (159276), Hand-Penned Designer Series Paper (158420)

Accessories: Whisper White Crinkled Seam Binding Ribbon (151326), Genial Gems (155500), Highland Heather Stampin’ Blends Combo Pack (154887), Pastel Pearls (154571), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Basic White: 5 ½” x 11” scored at 4 ¼”, 5 ½” and 6 ¾”
Highland Heather: 4” x 5 ¼”
Hand-Penned Designer Series Paper: 3 ¾” x 5”
- 1” x 3 ¾” (Daffodil Delight DSP)
- 4” x 2” (Tag)
- 1” x 5 ¼” (2 pieces)
- 1 ¼” x 2 ¾” (3 pieces)
Basic White: 1 ¼” x 2 ¾” (3 pieces)
- 3 ¼” x 4 ½” (Scalloped Contours Die)
- 2 ¾” x 3 ½” (Penned Flowers Dies)
Daffodil Delight: 1 ½” x 3” (3 pieces)
Whisper White Crinkled Seam Binding Ribbon: 5”

More Information on My Twisty Thank You Card:

Twisty Fold Template:

Hope you like my Twisty Thank You Card.

To download the Twisty Fold Template, please click here or on the image above.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

My Hand-Penned Thank You Card

July 12, 2021 Leave a comment

Today I am sharing my Hand-Penned Thank You Card that is using the Hand-Penned Suite Collection by Stampin’ Up! I love getting the Suite Collections since you know everything will go together perfectly!

The Hand-Penned Suite Collection includes:

Hand-Penned Petals Stamp Set (10% off)
Penned Flowers Dies (10% off)
Hand-Penned Designer Series Paper
Genial Gems

I thought that a Collar Fold would show off both sides of the beautiful Hand-Penned Designer Series Paper! So, I used my Collar Fold Template (found at the end of this post) to measure my DSP for the cutting and folding. Next, I used adhesive to glue the flaps down so that they didn’t interfere with the die cuts.

I wanted the “Thanks” sentiment to fit in the area between the folds resulting in a card that can be either vertical or horizontal. I found that I needed a background behind the stamped flowers to make them stand out from the DSP and the stitched circle from the Painted Labels Dies worked well for it. A butterfly was a perfect accent as if it is flitting from flower to flower on the DSP. The butterfly was die cut from the large piece of Highland Heather making sure that it was in a location that would be covered by the DSP which is a great way to save paper! A scattering of Genial Gems was all this card needed since I wanted the fold to be the focal point.

Close Up of My Thank You Card — Close Up of My Hand-Penned Thank You Card

Supplies:

Stamps/Bundles/Dies: Hand-Penned Suite Collection (155503), Painted Labels Dies (151605), Brilliant Wings Dies (155523)

Inks: Tuxedo Black Memento Ink Pad (132708), Highland Heather Classic Stampin’ Pad (147103), Pool Party Classic Stampin’ Pad (147107), Daffodil Delight Classic Stampin’ Pad (147094), Mint Macaron Classic Stampin’ Pad (147106)

Paper: Basic White Thick (159229), Highland Heather (146986), Daffodil Delight (119683), Basic White (159276), Hand-Penned Designer Series Paper (155499)

Accessories: Genial Gems (155500), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Mini Glue Dots (103683)

Measurements:

Basic White Thick: 5 ½” x 8 ½” scored at 4 ¼”
Highland Heather: 4” x 5
Hand-Penned Designer Series Paper: 3 7/8” x 5 1/8”
Basic White: 3 ½” x 3”
Daffodil Delight: 3” x 3”

More Information on My Hand-Penned Thank You Card:

Hope you like my Hand-Penned Thank You Card.

To download the Collar Fold Template, please click here.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

I’m Smiling Under This Face Mask

July 8, 2021 Leave a comment

My Covid Design Team Card — I’m Smiling Under This Face Mask Card

Hello Crafty Friends! It’s Laurie here! I am sharing I’m Smiling Under this Face Mask as my Design Team Inspiration Card using a number of digital stamps by Paper Nest Dolls including Essential Worker (Doctor), Essential Worker (Nurse), Essential Worker (Masks Set) and Avery in Heart.

I just received my second dose of the Covid vaccine on Monday and my Hubby received his on July 1^st, which was Canada Day for us. So, I made a card for my Hubby and a different one for me to give to the medical staff as our way of showing our appreciation for what they are doing.

Don’t you just love the sentiment, “I’m smiling under this face mask”! It was from a Covid Fundraiser by Stampin’ Up! where you could buy a PDF with a ton of Covid sentiments.

Inside of My Covid-19 Card — Inside of My I’m Smiling Under This Face Mask

I love how you can add the Essential Worker (Masks Set) to a digital stamp either afterwards like I did with the doctor and nurse or add it directly to the stamp. I decorated the inside of my card with the Avery in Heart digital stamp, but I added a mask directly to her using Word. Then I coloured her with my Copic markers to match the nurse and doctor on the front of my card. I layered her onto the heart beat which I die cut from a die in my stash.

My Hubby’s Card

For my Hubby’s card, I created a Canadian flag on the front since he was getting it done on Canada Day. I even used “red/white checked flannel” Designer Series Paper for the background. Can’t get any more Canadian than that! Lol! Instead of using the Essential Worker (Masks Set), I left their faces bare. Isn’t it neat how you can get two different looks with and without the masks!

For the inside of his card, I used the Share Sunshine PDF Download by Stampin’ Up! for the Thank you Hero sentiment and punched it out using the Heart Punch.

Inside of My Hubby's Covid-19 Card — Inside of My Hubby’s Covid-19 Card

————————–

Copic Markers:

Masked Doctor
Skin: E04/E11/E21/E00/E000/R20
Hair: C9/C7/C6/C5/C3
Pants/Tie: B99/B97/B95
Coat/Shirt: C3/C0/0
Doctor Bag: R29/R27/R24/R22/C3/C5/C7
Shoes: C7/C5/C3
Mask: BG13/BG11/BG10

Close Up of The Doctor — Close Up of Masked Doctor on My Card

Masked Nurse
Skin: E04/E11/E21/E00/E000/R20
Hair: E39/E37/E35/E33/E31
Uniform/Mask: R85/R83/R81
Shoes/Stethoscope/Clip Board: C5/C3/C1

Close Up of the Masked Nurse — Close Up of Masked Nurse on My Card

Doctor
Skin: E04/E11/E21/E00/E000/R20
Hair: E25/YR24/Y26/Y21
Pants: E37/E35/E33/E31
Tie: B99/B97/B95
Coat/Shirt: C3/C0/0
Doctor Bag: R29/R27/R24/R22/C3/C5/C7
Shoes: C7/C5/C3

Nurse
Skin: E04/E11/E21/E00/E000/R20
Hair: E39/E37/E35/E33/E31
Uniform: BG13/BG11/BG10
Shoes/Stethoscope/Clip Board: C5/C3/C1

Avery in Heart
Skin: E04/E11/E21/E00/E000/R20
Hair: E29/E27/E25/E23/E21
Blues: B99/B97/B95
Pinks: R85/R83/R81

————————–

Card Recipe for My Covid Cards:

Essential Worker (Doctor), Essential Worker (Nurse), Essential Worker (Masks Set)
and Avery in Heart, Paper Nest Dolls
Paper Basics – Stamper’s Select White Cardstock, Papertrey Ink
Share Sunshine PDF Download, Stampin’ Up!
Heart Beat Die, From my Stash
Heart Punch Pack, Stampin’ Up!

My Card
Woven Threads Designer Series Paper, Stampin’ Up!
Galvanized Metal Paper, Stampin’ Up!
Nurse’s Gear Precision Cutting Dies, Frantic Stamper Inc.
Adhesive Bandage Precision Cutting Dies, Frantic Stamper Inc.
Seaside Spray, Crumb Cake, Rococo Rose
and Basic White Card Stock, Stampin’ Up!

Hubby’s Card
Frostwood Lodge Designer Series Paper, Stampin’ Up!
Gathered Leaves Dies, Stampin’ Up!
Stitched Rectangle Dies, Stampin’ Up!
Real Red and Basic White Card Stock, Stampin’ Up!

Finished card sizes: 3.5” x 6”

————————–

To view my other Paper Nest Dolls cards, please click here.

Hope you like my Design Team card using
Essential Worker (Doctor), Essential Worker (Nurse), Essential Worker (Masks Set)
and Avery in Heart by Paper Nest Dolls!

Thank you for stopping by!

Hugs,
Laurie

Hydrangea Thank You Card

March 23, 2021 Leave a comment

Today is I am sharing my Hydrangea Thank You Card that I made for a swap using the beautiful Hydrangea Haven Bundle by Stampin Up! I love how the watercolour hydrangea pops out of the DSP and the Stitched Nested frame!

I swooned over the Hydrangea Hill Designer Series Paper when I saw it! All my favourite colours are in it like Gorgeous Grape, Highland Heather and Mossy Meadow to name just a few! So, I decide that I wanted to use some of the colours in the DSP for my hydrangea flower head and leaves.

The Process of the Watercolour Technique

Prepare to get all inky! For my card, I pulled out my Stampin’ Up! Ink Refills of Gorgeous Grape, Highland Heather, Misty Moonlight and Seaside Spray to use on my watercolour paper. I drop a couple of drips of each colour onto my work space and added a few spritzes of the Frost White Shimmer Paint (that was premixed with rubbing alcohol) and then a few spritzes of water. I then dragged my watercolour paper through the ink picking up the colours.

The Process of the Hydrangea Watercolour Technique — The Process of the Watercolour Technique

Once the ink was dried on the flower heads, I used my Blending Brush to add a bit more Gorgeous Grape to the raised petals to give it a bit more dimension.

I did the same steps for the stem and leaves using Old Olive and Mossy Meadow.

Here is a video that I presented to fellow demonstrators showing this technique:

Video Demonstrating The Watercolour Technique

I love this look since you can get different variations in the flowers. Here is an example of both light and dark flower heads.

Two Versions of the Hydrangea Watercolour Technique

A scattering of the pretty Pastel Pearls and the Misty Moonlight/silver Baker’s Twine are all the embellishments this card need.

Supplies:

Stamps/Bundles/Dies: Hydrangea Haven Bundle (156251), Stitched Nested Labels Dies (149638)

Inks: Gorgeous Grape Classic Stampin’ Pad (147099)

Paper: Highland Heather (146986), Gorgeous Grape (146987), Basic White (159276), Mossy Meadow (133676), Hydrangea Hill Designer Series Paper (154570), Fluid 100 Watercolour Paper (149612)

Accessories: Gorgeous Grape Classic Stampin’ Ink Refill (147164), Highland Heather Classic Stampin’ Ink Refill (147167), Misty Moonlight Classic Stampin’ Ink Refill (153124), Seaside Spray Classic Stampin’ Ink Refill (150092), Old Olive Classic Stampin’ Ink Refill (100531), Mossy Meadow Classic Stampin’ Ink Refill (133651), Frost White Shimmer Paint (147046), Stampin’ Spritzer (126185), Pastel Pearls (154571), Flowers For Every Season Ribbon Combo Pack (153620), Blending Brushes (153611), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683), Rubbing Alcohol, Water

Measurements:

Highland Heather: 5 ½” x 8 ½” scored at 4 ¼”
Gorgeous Grape: 5 ¼” x 4”
Basic White: 1” x ¾”
Hydrangea Hill Designer Series Paper: 2 ¾” x 4 ¾”
Watercolour Paper: 2 pieces:
- 1 7/8” x 2” (flower head)
- 2 ¾” x 3”
Misty Moonlight/Silver Baker’s Twine: 5”

For Further Info:

Hope you like my Hydrangea Thank You Card.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.

My Sweet Birthday Card

February 23, 2021 Leave a comment

Today is I am sharing My Sweet Birthday Card that I made for a swap using the Sweet Strawberry Bundle and the Sale-a-Bration Berry Bliss Bundle. There is only a few more day left of the Jan-Feb 2021 Sale-a-Bration and you can get the Berry Bliss Bundle for free with a qualifying $120 order.

I love how these two bundles coordinate with their berry sweet theme! The Berry Delightful Designer Series Paper is so pretty with its fresh and juicy paper designs. Both stamp sets are Distinktive and consist of two-step stamping to give you texture and dimension to your images.

Who doesn’t love a coordinating punch and what is better than the Strawberry Builder Punch! I even punched out a coordinating Granny Apple Green stem to top my strawberry.

I wanted to create a country theme by using the Pinewood Planks 3D Embossing Folder and the Denim Ribbon. The Stitched Oval also adds to my theme. The plaid DSP reminded me of a table cloth that has been laid on the ground to enjoy your picnic of berries. A couple of Red Rhinestones are the finishing touch and add a bit of sparkle to the card.

I had so much fun with my card that I ended up making 3 versions all with different sentiments.

Supplies:

Stamps/Bundles/Dies: Sweet Strawberry Bundle (156214), Berry Blessings Bundle (157613)

Inks: Crumb Cake Classic Stampin’ Pad (147116), Poppy Parade Classic Stampin’ Pad (147050), Pacific Point Classic Stampin’ Pad (147098), Granny Apple Green Classic Stampin’ Pad (147095)

Paper: Poppy Parade (119793), Crumb Cake (120953), Basic White (159276), Granny Apple Green (146990), Berry Delightful Designer Series Paper (157613)

Accessories: Pinewood Planks 3D Embossing Folder (152320), 3/8″ Denim Ribbon (149590), Stitched Shapes Dies (152323), Red Rhinestone Basic Jewels (146924), Bone Folder (102300), Stampin’ Dimensionals (104430), Stampin’ Seal (152813), Glue Dots (103683)

Measurements:

Poppy Parade: 5 ½” x 8 ½” scored at 4 ¼”
Crumb Cake: 5 ¼” x 4”
Basic White: 5 ¼” x 1 ½”
Granny Apple Green: 5 ¼” x 1 5/8” and scrap
Berry Delightful Designer Series Paper: 5 ¼” x 2 5/16”
Denim Ribbon: 2 pieces at 6” and 4”

For Further Info:

Hope you like My Sweet Birthday Card.

For more of my Stampin’ Up! cards, please click here.

You will find the items listed above in my online store.