Plywood rack

Discover Pinterest’s best ideas and inspiration for Plywood rack. Get inspired and try out new things.
688 people searched this
·
Last updated 3d
Made with 2x4 lumber, 3/4” PVC, and 2 small scraps of 3/4” plywood. Holds 20 doors. Material cost was about $60, plus $20 for a 27 mm drill bit. Holes for PVC were made on a drill press, with 3 1/2” spacing, and 5 degree upward slope. And I cut the PVC on my miter saw with a stop block, so it was quick and easy. I considered using caulk to secure the PVC in the holes, but they fit snugly enough that it wasn’t needed. Cabinet Door Drying Rack Diy, Diy Drying Rack, 2x4 Lumber, Drill Press, Little Kitchen, Miter Saw, Workshop Storage, Kitchen Cabinet Design, Drying Rack

Made with 2x4 lumber, 3/4” PVC, and 2 small scraps of 3/4” plywood. Holds 20 doors. Material cost was about $60, plus $20 for a 27 mm drill bit. Holes for PVC were made on a drill press, with 3 1/2” spacing, and 5 degree upward slope. And I cut the PVC on my miter saw with a stop block, so it was quick and easy. I considered using caulk to secure the PVC in the holes, but they fit snugly enough that it wasn’t needed.

10

Related interests

Plywood rack and more

Explore related boards