TiO2–SiO2 nanocomposite thin films have gained the attention of the scientific community due to t... more TiO2–SiO2 nanocomposite thin films have gained the attention of the scientific community due to their unique physical and chemical properties. In this paper, we report on the fabrication and characterization of a TiO2–SiO2 nanocomposite disk-shaped target. The target was used for the deposition of TiO2–SiO2 nanocomposite thin films on fluorine-doped tin oxide/glass substrates using the pulsed laser deposition (PLD) technique. The thicknesses of the thin films were fixed to 100 nm, and the deposition temperature ranged from room temperature to 300 °C. As revealed by the microstructural and morphological characterizations revealed, the TiO2–SiO2 nanocomposite thin films are amorphous and display homogeneous distribution. The determined values of the indirect optical band gap range from 2.92 to 3.07 eV, while those of the direct optical band gap lie between 3.50 and 3.55 eV. Additionally, as the deposition temperature decreases, the light transmission increases in the visible and in th...
In this paper, we report on the effect of titanium dioxide (TiO2) target sintering temperature on... more In this paper, we report on the effect of titanium dioxide (TiO2) target sintering temperature on the morphological and optical properties of amorphous titanium dioxide thin films synthesized by pulsed laser deposition (PLD) on indium tin oxide (ITO) glass substrate and subsequently heat-treated in air at low temperature (150 °C). Three types of targets were used, unsintered (pressed at room temperature), sintered at 500 °C and sintered at 1000 °C. The surface morphology of the samples was investigated by scanning electron microscopy (SEM), and profilometry was used for thickness measurements. The structural properties of the films were examined by X-ray diffraction (XRD), while their optical properties were studied by UV‒vis spectroscopy. The obtained TiO2 thin films have an amorphous nature, as shown by XRD analysis. Profilometer showed that sintered target samples have more reliable thicknesses than unsintered ones. The SEM studies revealed the sufficient structural homogeneity o...
International Journal of Electrical and Computer Engineering (IJECE), 2017
The Market for photovoltaic cells (PV) has grown fast due to a higher demand on PV applications. ... more The Market for photovoltaic cells (PV) has grown fast due to a higher demand on PV applications. However, there are still the transport and connection problems of the PV systems to the grid because of the difference in the current form. To assure the adequate connection between the PV sources and the network, the conversion of direct current (DC) to an alternative current (AC) is required and provided by an electronic device known as the inverter. In this last years, the conventional inverter structure reached its limits in power level and conversion performance. The multilevel inverter (MLI) structure was introduced and widely used in high power and high voltage applications to solve the conventional inverter limitation problem. In this paper, the Neutral-Point-Clamped (NPC) topology of the MLI was simulated to evaluate the effect of modulation index variation of the control technique on the harmonic behavior of the fifteen-level NPC. The simulation results were useful for the opti...
TiO2–SiO2 nanocomposite thin films have gained the attention of the scientific community due to t... more TiO2–SiO2 nanocomposite thin films have gained the attention of the scientific community due to their unique physical and chemical properties. In this paper, we report on the fabrication and characterization of a TiO2–SiO2 nanocomposite disk-shaped target. The target was used for the deposition of TiO2–SiO2 nanocomposite thin films on fluorine-doped tin oxide/glass substrates using the pulsed laser deposition (PLD) technique. The thicknesses of the thin films were fixed to 100 nm, and the deposition temperature ranged from room temperature to 300 °C. As revealed by the microstructural and morphological characterizations revealed, the TiO2–SiO2 nanocomposite thin films are amorphous and display homogeneous distribution. The determined values of the indirect optical band gap range from 2.92 to 3.07 eV, while those of the direct optical band gap lie between 3.50 and 3.55 eV. Additionally, as the deposition temperature decreases, the light transmission increases in the visible and in th...
In this paper, we report on the effect of titanium dioxide (TiO2) target sintering temperature on... more In this paper, we report on the effect of titanium dioxide (TiO2) target sintering temperature on the morphological and optical properties of amorphous titanium dioxide thin films synthesized by pulsed laser deposition (PLD) on indium tin oxide (ITO) glass substrate and subsequently heat-treated in air at low temperature (150 °C). Three types of targets were used, unsintered (pressed at room temperature), sintered at 500 °C and sintered at 1000 °C. The surface morphology of the samples was investigated by scanning electron microscopy (SEM), and profilometry was used for thickness measurements. The structural properties of the films were examined by X-ray diffraction (XRD), while their optical properties were studied by UV‒vis spectroscopy. The obtained TiO2 thin films have an amorphous nature, as shown by XRD analysis. Profilometer showed that sintered target samples have more reliable thicknesses than unsintered ones. The SEM studies revealed the sufficient structural homogeneity o...
International Journal of Electrical and Computer Engineering (IJECE), 2017
The Market for photovoltaic cells (PV) has grown fast due to a higher demand on PV applications. ... more The Market for photovoltaic cells (PV) has grown fast due to a higher demand on PV applications. However, there are still the transport and connection problems of the PV systems to the grid because of the difference in the current form. To assure the adequate connection between the PV sources and the network, the conversion of direct current (DC) to an alternative current (AC) is required and provided by an electronic device known as the inverter. In this last years, the conventional inverter structure reached its limits in power level and conversion performance. The multilevel inverter (MLI) structure was introduced and widely used in high power and high voltage applications to solve the conventional inverter limitation problem. In this paper, the Neutral-Point-Clamped (NPC) topology of the MLI was simulated to evaluate the effect of modulation index variation of the control technique on the harmonic behavior of the fifteen-level NPC. The simulation results were useful for the opti...
Uploads
Papers by laid kadri