An evolving how-to guide for securing a Linux server that, hopefully, also teaches you a little about security and why it matters.

• Introduction
  • Guide Objective
  • Why Secure Your Server
  • Why Yet Another Guide
  • To Do / To Add
• Guide Overview
  • About This Guide
  • Safe vs. DANGER ZONE
  • Editing Configuration Files - For The Lazy
  • Contributing
• Before You Start
  • Identify Your Principles
  • Picking A Linux Distribution
  • Installing Linux
  • Pre/Post Installation
  • Other Important Notes
• The Main Event
  • SSH Public/Private Keys
  • Limit Who Can Use sudo
  • Secure SSH
    • Create SSH Group For AllowGroups
    • Secure /etc/ssh/sshd_config
    • Deactivate Short Moduli
  • NTP Client
  • [NS] Configure Gmail as MTA
  • UFW: Uncomplicated Firewall
  • PSAD: iptables Intrusion Detection And Prevention
  • [NS] Separate iptables Log File
  • Fail2ban: Application Intrusion Detection And Prevention
  • [DZ] Linux Kernel sysctl Hardening
  • [DZ] Password Protect GRUB
  • [DZ] Disable Root Login
  • [DZ] Change Default umask
  • Force Accounts To Use Secure Passwords
  • 2FA/MFA for SSH
  • Apticron - Automatic Update Notifier
  • Orphaned Software
  • Lynis - Linux Security Auditing
• Miscellaneous
  • Contacting Me
  • Additional References
  • Acknowledgments
  • Disclaimer / Warranty

(TOC made with nGitHubTOC)

This guide's purpose is to teach you how to secure a Linux server.

There are a lot of things you can do to secure a Linux server and this guide will attempt to cover as many of them as possible. More topics/material will be added as I learn, or as folks contribute.

(Table of Contents)

I assume you're using this guide because you, hopefully, already understand why good security is important. That is a heavy topic onto itself and breaking it down is out-of-scope for this guide. If you don't know the answer to that question, I advise you research it first.

At a high level, the second a device, like a server, is in the public domain -- i.e visible to the outside world -- it becomes a target for bad-actors. An unsecured device is a playground for bad-actors who want access to your data, or to use your server as another node for their large-scale DDOS attacks.

What's worse is, without good security, you may never know if your server has been compromised. A bad-actor may have gained unauthorized access to your server and copied your data without changing anything so you'd never know. Or your server may have been part of a DDOS attack and you wouldn't know. Look at many of the large scale data breaches in the news -- the companies often did not discover the data leak or intrusion until long after the bad-actors were gone.

Contrary to popular belief, bad-actors don't always want to change something or lock you out of your data for money. Sometimes they just want the data on your server for their data warehouses (there is big money in big data) or to covertly use your server for their nefarious purposes.

(Table of Contents)

This guide may appear duplicative/unnecessary because there are countless articles online that tell you how to how to secure Linux but the information is spread across different articles, that cover different things, and in different ways. Who has time to scour through hundreds of articles?

As I was going through research for my Debian build, I kept notes. At the end I realized that, along with what I already knew, and what I was learning, I had the makings of a how-to guide. I figured I'd put it online to hopefully help others learn, and save time.

I've never found one guide that covers everything -- this guide is my attempt.

Many of the things covered in this guide may be rather basic/trivial, but most of us do not install Linux every day and it is easy to forget those basic things.

IT automation tools like Ansible, Chef, Jenkins, Puppet, etc. help with the tedious task of installing/configuring a server but IMHO they are better suited for multiple or large scale deployments. IMHO, the overhead required to use those kinds of automation tools is wholly unnecessary for a one-time single server install for home use.

(Table of Contents)

• Custom Jails for Fail2ban
• Linux Kernel sysctl Hardening
• Security-Enhanced Linux / SELinux
• disk encryption
• BIOS password
• Anti-Virus
• use ed25519 keys instead of RSA for SSH public/private keys
• psad
• unattended upgrades for critical security updates and patches
• logwatch
• Rkhunter and chrootkit

(Table of Contents)

This guide...

• ...is a work in progress.
• ...is focused on at-home Linux servers. All of the concepts/recommendations here apply to larger/professional environments but those use-cases call for more advanced and specialized configurations that are out-of-scope for this guide.
• ...does not teach you about Linux, how to install Linux, or how to use it.
• ...is meant to be Linux distribution agnostic.
• ...does not teach you everything you need to know about security nor does it get into all aspects of system/server security. For example, physical security is out of scope for this guide.
• ...does not talk about how programs/tools work, nor does it delve into their nook and crannies. Most of the programs/tools this guide references are very powerful and highly configurable. The goal is to cover the bare necessities -- enough to wet your appetite and make you hungry enough to want to go and learn more.
• ...aims to make it easy by providing code you can copy-and-paste. You might need to modify the commands before you paste so keep your favorite text editor handy.
• ...is organized in an order that makes logical sense to me -- i.e. securing SSH before installing a firewall. As such, this guide is intended to be followed in the order it is presented but it is not necessary to do so. Just be careful if you do things in a different order -- some sections require previous sections to be completed.

(Table of Contents)

Some of the sections in this guide are generally considered safe and shouldn't make your system unusable.

Some sections cover things that are high risk because there is a possibility they can make your system unusable, or are considered unnecessary by many because the risks outweigh any rewards. These sections are tagged with [DZ] and the content is hidden by default. !! PROCEED AT YOUR OWN RISK !!

Some sections are not necessary to secure your server but are still helpful. For example, you don't need to configure your server to send mail through Gmail but you will want someway to send e-mails so you get critical system/security alerts. These sections are tagged with [NS].

Regardless of the section, as is with anything in this guide, use with caution and proceed at your own risk.

(Table of Contents)

I am very lazy and do not like to edit files by hand if I don't need to. I also assume everyone else is just like me. :)

So, when and where possible, I have provided code snippets to quickly do what is needed, like add or change a line in a configuration file.

The code snippets use basic commands like echo, cat, sed, awk, and grep. How the code snippets work, like what each command/part does, is out of scope for this guide -- the man pages are your friend.

Note: The code snippets do not validate/verify the change went through -- i.e. the line was actually added or changed. I'll leave the verifying part in your capable hands. The steps in this guide do include taking backups of all files that will be changed.

Not all changes can be automated with code snippets. Those changes need good, old fashioned, manual editing. For example, you can't just append a line to an INI type file. Use your favorite Linux text editor.

(Table of Contents)

I wanted to put this guide on GitHub to make it easy to collaborate. The more folks that contribute, the better and more complete this guide will become.

To contribute you can fork and submit a pull request or submit a new issue.

(Table of Contents)

Before you start you will want to identify what your Principles are. What is your threat model? Some things to think about:

• Why do you want to secure your server?
• How much security do you want or not want?
• How much convenience are you willing to compromise for security and vice-versa?
• What are the threats you want to protect against? What are the specifics to your situation? For example:
  • Is physical access to your server/network a possible attack vector?
  • Will you be opening ports on your router so you can access your server from outside your home?
  • Will you be hosting a file share on your server that will be mounted on a desktop class machine? What is the possibility of the desktop machine getting infected and, in turn, infecting the server?
• Do you have a means of recovering if your security implementation locks you out of your own server? For example, you disabled root login or password protected GRUB.

These are just a few things to think about. Before you start securing your server you will want to understand what you're trying to protect against and why so you know what you need to do.

(Table of Contents)

This guide is intended to be distribution agnostic so users can use any distribution they want. With that said, there are a few things to keep in mind:

You want a distribution that...

• ...is stable. Unless you like debugging issues at 2 AM, you don't want an unattended upgrade, or a manual package/system update, to render your server inoperable. But this also means you're okay with not running the latest, greatest, bleeding edge software.
• ...stays up-to-date with security patches. You can secure everything on your server, but if the core OS or applications you're running have known vulnerabilities, you'll never be safe.
• ...you're familiar with. If you don't know Linux, I would advise you play around with one before you try to secure it. You should be comfortable with it and know your way around, like how to install software, where configuration files are, etc...
• ...is well supported. Even the most seasoned admin needs help every now and then. Having a place to go for help will save your sanity.

(Table of Contents)

Installing Linux is out-of-scope for this guide because each distribution does it differently and the installation instructions are usually well documented. If you need help, start with your distribution's documentation. Regardless of the distribution, the high-level process usually goes like so:

1. download the ISO
2. burn/copy/transfer it to your install medium (e.g. a CD or USB stick)
3. boot your server from your install medium
4. follow the prompts to install

Where applicable, use the expert install option so you have tighter control of what is running on your server. Only install what you absolutely need. I, personally, do not install anything other than SSH.

(Table of Contents)

• If you're opening ports on your router so you can access your server from the outside, disable the port forwarding until your system is up and secured.
• Unless you're doing everything physically connected to your server, you'll need remote access so be sure SSH works.
• Be sure to keep your system up-to-date (i.e. sudo apt update && sudo apt upgrade on Debian based systems).
• At some point, like maybe right after configuring SSH public/private keys, make sure you perform any tasks specific to your setup like:
  • configuring network
  • configuring mount points in /etc/fstab
  • creating the initial user accounts
  • etc...
• Your server will need to be able to send e-mails so you can get important security alerts. If you're not setting up a mail server check Configure Gmail as MTA.

(Table of Contents)

• This guide is being written and tested on Debian. Most things below should work on other distributions. If you find something that does not, please contact me. The main thing that separates each distribution will be its package management system. Since I use Debian, I will provide the appropriate apt commands that should work on all Debian based distributions. If someone is willing to provide the respective commands for other distributions, I will add them.
• File paths and settings also may differ slightly -- check with your distribution's documentation if you have issues.
• Read the whole guide before you start. Your use-case and/or principals may call for not doing something or for changing the order.
• Do not blindly copy-and-paste without understanding what you're pasting. Some commands will need to be modified for your needs before they'll work -- usernames for example.

(Table of Contents)

Using SSH public/private keys is more secure than using a password. It also makes it easier and faster, to connect to our server because you don't have to enter a password.

Check the references below for more details but, at a high level, public/private keys work by using a pair of keys to verify identity.

1. One key, the public key, can only encrypt data, not decrypt it
2. The other key, the private key, can decrypt the data

For SSH, a public and private key is created on the client. The public key is then securely transferred to the server you want to connect to. After this is done, SSH uses the public and private keys to verify identity and then establishing a secure connection. Identity is verified by the server encrypting a challenge message with the public key, then sending it to the client. If the client cannot decrypt the challenge message with the private key, the identity can't be verified and a connection will not be established.

They are considered more secure because you need the private key to establish an SSH connection. If you set PasswordAuthentication no in /etc/ssh/sshd_config, then SSH won't let you connect without the private key.

You can also set a passphrase for the keys which would require you to enter the key passphrase when connecting using public/private keys. Keep in mind doing this means you can't use the key for automation because you'll have no way to send the passphrase in your scripts. ssh-agent is a program that is shipped in many Linux distros (and usually already running) that will allow you to hold your unencrypted private key in memory for a configurable duration. Simply run ssh-add and it will prompt you for your passphrase. You will not be prompted for your passphrase again until the configurable duration has passed.

We will be using Ed25519 keys which, according to https://linux-audit.com/:

It is using an elliptic curve signature scheme, which offers better security than ECDSA and DSA. At the same time, it also has good performance.

• Ed25519 public/private SSH keys:
  • private key on your client
  • public key on your server

• You'll need to do this step for every computer and account you'll be connecting to your server from/as.

• https://www.ssh.com/ssh/public-key-authentication
• https://help.ubuntu.com/community/SSH/OpenSSH/Keys
• https://linux-audit.com/using-ed25519-openssh-keys-instead-of-dsa-rsa-ecdsa/
• https://www.digitalocean.com/community/tutorials/understanding-the-ssh-encryption-and-connection-process
• https://wiki.archlinux.org/index.php/SSH_Keys
• man ssh-keygen
• man ssh-copy-id
• man ssh-add

1. From the computer you're going to use to connect to your server, the client, not the server itself, create an Ed25519 key with ssh-keygen:

   ssh-keygen -t ed25519

   Generating public/private ed25519 key pair.
   Enter file in which to save the key (/home/user/.ssh/id_ed25519):
   Created directory '/home/user/.ssh'.
   Enter passphrase (empty for no passphrase):
   Enter same passphrase again:
   Your identification has been saved in /home/user/.ssh/id_ed25519.
   Your public key has been saved in /home/user/.ssh/id_ed25519.pub.
   The key fingerprint is:
   SHA256:F44D4dr2zoHqgj0i2iVIHQ32uk/Lx4P+raayEAQjlcs user@client
   The key's randomart image is:
   +--[ED25519 256]--+
   |xxxx  x          |
   |o.o +. .         |
   | o o oo   .      |
   |. E oo . o .     |
   | o o. o S o      |
   |... .. o o       |
   |.+....+ o        |
   |+.=++o.B..       |
   |+..=**=o=.       |
   +----[SHA256]-----+
   

   Note: If you set a passphrase, you'll need to enter it every time you connect to your server using this key, unless you're using ssh-agent.

2. When you SSH to your server, your server will look for your public key in the .ssh/authorized_keys file in your home directory. So we need to append the contents of the public key ~/.ssh/id_ed25519.pub from the machine you're on (the client) to the ~/.ssh/authorized_keys file on the target server. You'll want to do this in a secure way since the public key gives access to your server. One approach is to copy it to a USB stick and physically transfer it to the server. If you're sure there is nobody listening between the client you're on and your server, you can use ssh-copy-id to transfer and append the public key:

   ssh-copy-id user@server    

   /usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/home/user/.ssh/id_ed25519.pub"
   The authenticity of host 'host (192.168.1.96)' can't be established.
   ECDSA key fingerprint is SHA256:QaDQb/X0XyVlogh87sDXE7MR8YIK7ko4wS5hXjRySJE.
   Are you sure you want to continue connecting (yes/no)? yes
   /usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
   /usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
   user@host's password:
   
   Number of key(s) added: 1
   
   Now try logging into the machine, with:   "ssh 'user@host'"
   and check to make sure that only the key(s) you wanted were added.
   

Now would be a good time to perform any tasks specific to your setup.

(Table of Contents)

sudo lets accounts run commands as other accounts, including root. We want to make sure that only the accounts we want can use sudo.

• sudo privileges limited to those who are in a group we specify

• Your installation may have already done this, or may already have a special group intended for this purpose so check first.
  • Debian creates the sudo group
  • RedHat creates the wheel group

1. Create a group:

   sudo groupadd sudousers

2. Add account(s) to the group:

   sudo usermod -a -G sudousers user1
   sudo usermod -a -G sudousers user2
   sudo usermod -a -G sudousers  ...

   You'll need to do this for every account on your server that needs sudo privileges.

3. Edit /etc/sudoers:

   sudo cp --preserve /etc/sudoers /etc/sudoers.$(date +"%Y%m%d%H%M%S")
   sudo visudo

4. Tell sudo to only allow users in the sudousers group to use sudo by adding this line if it is not already there:

   %sudousers   ALL=(ALL:ALL) ALL
   

(Table of Contents)

To make it easy to control who can SSH to the server. By using a group, we can quickly add/remove accounts to the group to quickly allow or not allow SSH access to the server.

• a UNIX group that we'll use in Secure /etc/ssh/sshd_config to limit who can SSH to the server

• This is a per-requisite step to support the AllowGroup setting set in Secure /etc/ssh/sshd_config.

• man groupadd
• man usermod

1. Create a group:

   sudo groupadd sshusers

2. Add account(s) to the group:

   sudo usermod -a -G sshusers user1
   sudo usermod -a -G sshusers user2
   sudo usermod -a -G sshusers ...

   You'll need to do this for every account on your server that needs SSH access.

(Table of Contents)

SSH is a door into your server. This is especially true if you are opening ports on your router so you can SSH to your server from outside your home network. If it is not secured properly, a bad-actor could use it to gain unauthorized access to your system.

• a secure SSH configuration

• Make sure you've completed Create SSH Group For AllowGroups first.

• Mozilla's OpenSSH guidelines for OpenSSH 6.7+ at https://infosec.mozilla.org/guidelines/openssh#modern-openssh-67
• https://linux-audit.com/audit-and-harden-your-ssh-configuration/
• https://www.ssh.com/ssh/sshd_config/
• https://www.techbrown.com/harden-ssh-secure-linux-vps-server/
• https://serverfault.com/questions/660160/openssh-difference-between-internal-sftp-and-sftp-server/660325
• man sshd_config

1. Make a backup of /etc/ssh/sshd_config and remove default comments to make it easier to read:

   sudo cp --preserve /etc/ssh/sshd_config /etc/ssh/sshd_config.$(date +"%Y%m%d%H%M%S")
   sudo sed -i -r -e '/^#|^$/ d' /etc/ssh/sshd_config

2. Edit /etc/ssh/sshd_config then find and edit or add these settings that should apply regardless of your configuration/setup:

   Note: Your /etc/ssh/sshd_config file may already have some of these settings/lines. You will want to remove those and replace them with the ones below.

   ########################################################################################################
   # start settings from https://infosec.mozilla.org/guidelines/openssh#modern-openssh-67 as of 2019-01-01
   ########################################################################################################
   
   # Supported HostKey algorithms by order of preference.
   HostKey /etc/ssh/ssh_host_ed25519_key
   HostKey /etc/ssh/ssh_host_rsa_key
   HostKey /etc/ssh/ssh_host_ecdsa_key
   
   KexAlgorithms [email protected],ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group-exchange-sha256
   
   Ciphers [email protected],[email protected],[email protected],aes256-ctr,aes192-ctr,aes128-ctr
   
   MACs [email protected],[email protected],[email protected],hmac-sha2-512,hmac-sha2-256,[email protected]
   
   # LogLevel VERBOSE logs user's key fingerprint on login. Needed to have a clear audit track of which key was using to log in.
   LogLevel VERBOSE
   
   # Use kernel sandbox mechanisms where possible in unprivileged processes
   # Systrace on OpenBSD, Seccomp on Linux, seatbelt on MacOSX/Darwin, rlimit elsewhere.
   UsePrivilegeSeparation sandbox
   
   ########################################################################################################
   # end settings from https://infosec.mozilla.org/guidelines/openssh#modern-openssh-67 as of 2019-01-01
   ########################################################################################################
   
   # Log sftp level file access (read/write/etc.) that would not be easily logged otherwise.
   Subsystem sftp  internal-sftp -f AUTHPRIV -l INFO
   
   # only use the newer, more secure protocl
   Protocol 2
   
   # disable X11 forwarding as X11 is very insecure
   # you really shouldn't be running X on a server anyway
   X11Forwarding no
   
   # disable port forwarding
   AllowTcpForwarding no
   AllowStreamLocalForwarding no
   GatewayPorts no
   PermitTunnel no
   
   # don't allow login if the account has an empty password
   PermitEmptyPasswords no
   
   # ignore .rhosts and .shosts
   IgnoreRhosts yes
   
   # verify hostname matches IP
   UseDNS no
   
   Compression no
   TCPKeepAlive no
   AllowAgentForwarding no
   PermitRootLogin no
   

3. Then find and edit or add these settings, and set values as per your requirements:

   Setting	Valid Values	Example	Description	Notes
   AllowGroups	local UNIX group name	AllowGroups sshusers	group to allow SSH access to
   ClientAliveCountMax	number	ClientAliveCountMax 0	maximum number of client alive messages sent without response
   ClientAliveInterval	number of seconds	ClientAliveInterval 300	timeout in seconds before a response request
   ListenAddress	space separated list of local addresses	ListenAddress 0.0.0.0 ListenAddress 192.168.1.100	local addresses sshd should listen on	See Issue #1 for important details.
   LoginGraceTime	number of seconds	LoginGraceTime 30	time in seconds before login times-out
   MaxAuthTries	number	MaxAuthTries 2	maximum allowed attempts to login
   MaxSessions	number	MaxSessions 2	maximum number of open sessions
   MaxStartups	number	MaxStartups 2	maximum number of login sessions
   PasswordAuthentication	yes or no	PasswordAuthentication no	if login with a password is allowed
   Port	any open/available port number	Port 22	port that sshd should listen on

   Check man sshd_config for more details what these settings mean.

4. Restart ssh:

   sudo service sshd restart

(Table of Contents)

Per Mozilla's OpenSSH guidelines for OpenSSH 6.7+, "all Diffie-Hellman moduli in use should be at least 3072-bit-long".

• deactivate short moduli

• Mozilla's OpenSSH guidelines for OpenSSH 6.7+ at https://infosec.mozilla.org/guidelines/openssh#modern-openssh-67
• man moduli

1. Make a backup of /etc/ssh/moduli:

   sudo cp --preserve /etc/ssh/moduli /etc/ssh/moduli.$(date +"%Y%m%d%H%M%S")

2. Remove short moduli:

   sudo awk '$5 >= 3071' /etc/ssh/moduli | sudo tee /etc/ssh/moduli.tmp
   sudo mv /etc/ssh/moduli.tmp /etc/ssh/moduli

(Table of Contents)

Many security protocols leverage the time. If your system time is incorrect, it could have negative impacts to your server. An NTP client can solve that problem by keeping your system time in-sync with global NTP servers.

• NTP client installed and keeping server time in-sync

• https://cloudpro.zone/index.php/2018/01/27/debian-9-3-server-setup-guide-part-4/

1. Install ntp.

   On Debian based systems:

   sudo apt install ntp

2. Check ntp's status:

   sudo systemctl status ntp

   ● ntp.service - LSB: Start NTP daemon
      Loaded: loaded (/etc/init.d/ntp; generated; vendor preset: enabled)
      Active: active (running) since Sat 2019-02-16 00:32:20 EST; 3s ago
        Docs: man:systemd-sysv-generator(8)
      CGroup: /system.slice/ntp.service
              └─1051 /usr/sbin/ntpd -p /var/run/ntpd.pid -g -u 109:114
   
   Feb 16 00:32:20 host ntpd[1051]: Listen normally on 3 enp0s3 192.168.1.96:123
   Feb 16 00:32:20 host ntpd[1051]: Listen normally on 4 lo [::1]:123
   Feb 16 00:32:20 host ntpd[1051]: Listen normally on 5 enp0s3 [fe80::a00:27ff:feb6:ed8e%2]:123
   Feb 16 00:32:20 host ntpd[1051]: Listening on routing socket on fd #22 for interface updates
   Feb 16 00:32:21 host ntpd[1051]: Soliciting pool server 173.255.206.154
   Feb 16 00:32:22 host ntpd[1051]: Soliciting pool server 216.6.2.70
   Feb 16 00:32:22 host ntpd[1051]: Soliciting pool server 82.197.188.130
   Feb 16 00:32:23 host ntpd[1051]: Soliciting pool server 95.215.175.2
   Feb 16 00:32:23 host ntpd[1051]: Soliciting pool server 107.155.79.108
   Feb 16 00:32:23 host ntpd[1051]: Soliciting pool server 212.110.158.28
   

   sudo ntpq -p

        remote           refid      st t when poll reach   delay   offset  jitter
   ==============================================================================
    0.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.000
    1.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.000
    2.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.000
    3.debian.pool.n .POOL.          16 p    -   64    0    0.000    0.000   0.000
   -li216-154.membe 45.56.123.24     3 u  119   64    2   51.912    0.663   2.311
   +eudyptula.init7 162.23.41.10     2 u   60   64    3   99.378    1.563   3.485
   +107.155.79.108  129.7.1.66       2 u  119   64    2   49.171   -1.372   1.441
   -212.110.158.28  89.109.251.21    2 u  120   64    2  167.465   -1.064   1.263
   *ec2-54-242-183- 128.10.19.24     2 u   62   64    3   19.157    2.536   4.434
   -69.195.159.158  128.252.19.1     2 u  119   64    2   42.990    6.302   3.507
   -200.89.75.198 ( 200.27.106.115   2 u   58   64    3  160.786   42.737  12.827
   

(Table of Contents)

Unless you're planning on setting up your own mail server, you'll need a way to send e-mails from your server. This will be important for system alerts/messages.

• mail configured to send e-mails from your server using Gmail

• https://php.quicoto.com/setup-exim4-to-use-gmail-in-ubuntu/

1. Install exim4.

   On Debian based systems:

   sudo apt install exim4

2. Configure exim4:

   For Debian based systems:

   sudo dpkg-reconfigure exim4-config

   You'll be prompted with some questions:

   Prompt	Answer
   General type of mail configuration	mail sent by smarthost; no local mail
   System mail name	(default)
   IP-addresses to listen on for incoming SMTP connections	127.0.0.1
   Other destinations for which mail is accepted	(default)
   Visible domain name for local users	(default)
   IP address or host name of the outgoing smarthost	smtp.gmail.com::587
   Keep number of DNS-queries minimal (Dial-on-Demand)?	No
   Split configuration into small files?	No

3. Make a backup of /etc/exim4/passwd.client:

       sudo cp /etc/exim4/passwd.client /etc/exim4/passwd.client.$(date +"%Y%m%d%H%M%S")

4. Add a line like this to /etc/exim4/passwd.client

   *.google.com:[email protected]:yourPassword
   

   Replace [email protected] and yourPassword with your details. If you have 2FA/MFA enabled on your Gmail then you'll need to create and use an app password.

5. This file has your Gmail password so we need to lock it down:

   sudo chown root:Debian-exim /etc/exim4/passwd.client
   sudo chmod 640 /etc/exim4/passwd.client

6. Restart exim4:

   sudo service exim4 restart

7. Add some mail aliases so we can send e-mails to local accounts by adding lines like this to /etc/aliases:

   user1: [email protected]
   user2: [email protected]
   ...
   

   You'll need to add all the local accounts that exist on your server.

(Table of Contents)

Call me paranoid, and you don't have to agree, but I want to deny all traffic in and out of my server except what I explicitly allow. Why would my server be sending traffic out that I don't know about? And why would external traffic be trying to access my server if I don't know who or what it is? When it comes to good security, my opinion is to reject/deny by default, and allow by exception.

Of course, if you disagree, that is totally fine and can configure UFW to suit your needs.

Either way, ensuring that only traffic we explicitly allow is the job of a firewall. On Linux, the most common firewall is iptables. iptables, however, is rather complicated and confusing (IMHO). This is where UFW comes in. UFW simplifies the process of creating and managing iptables rules.

UFW works by letting you configure rules that:

• allow or deny
• input or output traffic
• to or from ports

You can create rules by explicitly specifying the ports or with application configurations that specify the ports.

• all network traffic, input and output, blocked except those we explicitly allow

• As you install other programs, you'll need to enable the necessary ports/applications.

• https://launchpad.net/ufw

1. Install ufw.

   On Debian based systems:

   sudo apt install ufw

2. Deny all outgoing traffic:

   sudo ufw default deny outgoing comment 'deny all outgoing traffic'

   Default outgoing policy changed to 'deny'
   (be sure to update your rules accordingly)
   

   If you are not as paranoid as me, and don't want to deny all outgoing traffic, you can allow it instead:

   sudo ufw default allow outgoing comment 'allow all outgoing traffic'

3. Deny all incoming traffic:

   sudo ufw default deny incoming comment 'deny all incoming traffic'

4. Obviously we want SSH connections in:

   sudo ufw limit in ssh comment 'allow SSH connections in'

   Rules updated
   Rules updated (v6)
   

5. Allow additional traffic as per your needs. Some common use-cases:

   # allow traffic out on port 53 -- DNS
   sudo ufw allow out 53 comment 'allow DNS calls out'
   
   # allow traffic out on port 123 -- NTP
   sudo ufw allow out 123 comment 'allow NTP out'
   
   # allow traffic out for HTTP, HTTPS, or FTP
   # apt might needs these depending on which sources you're using
   sudo ufw allow out http comment 'allow HTTP traffic out'
   sudo ufw allow out https comment 'allow HTTPS traffic out'
   sudo ufw allow out ftp comment 'allow FTP traffic out'
   
   # allow mail to go out
   sudo ufw allow out 'Mail submission' comment 'allow mail out'
   
   # allow whois
   sudo ufw allow out whois comment 'allow whois'
   
   # allow traffic out on port 68 -- the DHCP client
   # you only need this if you're using DHCP
   sudo ufw allow out 68 comment 'allow the DHCP client to update'

6. Start ufw:

   sudo ufw enable

   Command may disrupt existing ssh connections. Proceed with operation (y|n)? y
   Firewall is active and enabled on system startup
   

7. If you want to see a status:

   sudo ufw status

   Status: active
   
   To                         Action      From
   --                         ------      ----
   22/tcp                     LIMIT       Anywhere                   # allow SSH connections in
   22/tcp (v6)                LIMIT       Anywhere (v6)              # allow SSH connections in
   
   53                         ALLOW OUT   Anywhere                   # allow DNS calls out
   123                        ALLOW OUT   Anywhere                   # allow NTP out
   80/tcp                     ALLOW OUT   Anywhere                   # allow HTTP traffic out
   443/tcp                    ALLOW OUT   Anywhere                   # allow HTTPS traffic out
   21/tcp                     ALLOW OUT   Anywhere                   # allow FTP traffic out
   Mail submission            ALLOW OUT   Anywhere                   # allow mail out
   43/tcp                     ALLOW OUT   Anywhere                   # allow whois
   53 (v6)                    ALLOW OUT   Anywhere (v6)              # allow DNS calls out
   123 (v6)                   ALLOW OUT   Anywhere (v6)              # allow NTP out
   80/tcp (v6)                ALLOW OUT   Anywhere (v6)              # allow HTTP traffic out
   443/tcp (v6)               ALLOW OUT   Anywhere (v6)              # allow HTTPS traffic out
   21/tcp (v6)                ALLOW OUT   Anywhere (v6)              # allow FTP traffic out
   Mail submission (v6)       ALLOW OUT   Anywhere (v6)              # allow mail out
   43/tcp (v6)                ALLOW OUT   Anywhere (v6)              # allow whois
   

   or

   sudo ufw status verbose

   Status: active
   Logging: on (low)
   Default: deny (incoming), deny (outgoing), disabled (routed)
   New profiles: skip
   
   To                         Action      From
   --                         ------      ----
   22/tcp                     LIMIT IN    Anywhere                   # allow SSH connections in
   22/tcp (v6)                LIMIT IN    Anywhere (v6)              # allow SSH connections in
   
   53                         ALLOW OUT   Anywhere                   # allow DNS calls out
   123                        ALLOW OUT   Anywhere                   # allow NTP out
   80/tcp                     ALLOW OUT   Anywhere                   # allow HTTP traffic out
   443/tcp                    ALLOW OUT   Anywhere                   # allow HTTPS traffic out
   21/tcp                     ALLOW OUT   Anywhere                   # allow FTP traffic out
   587/tcp (Mail submission)  ALLOW OUT   Anywhere                   # allow mail out
   43/tcp                     ALLOW OUT   Anywhere                   # allow whois
   53 (v6)                    ALLOW OUT   Anywhere (v6)              # allow DNS calls out
   123 (v6)                   ALLOW OUT   Anywhere (v6)              # allow NTP out
   80/tcp (v6)                ALLOW OUT   Anywhere (v6)              # allow HTTP traffic out
   443/tcp (v6)               ALLOW OUT   Anywhere (v6)              # allow HTTPS traffic out
   21/tcp (v6)                ALLOW OUT   Anywhere (v6)              # allow FTP traffic out
   587/tcp (Mail submission (v6)) ALLOW OUT   Anywhere (v6)              # allow mail out
   43/tcp (v6)                ALLOW OUT   Anywhere (v6)              # allow whois
   

ufw ships with some default applications. You can see them with:

sudo ufw app list

Available applications:
  AIM
  Bonjour
  CIFS
  DNS
  Deluge
  IMAP
  IMAPS
  IPP
  KTorrent
  Kerberos Admin
  Kerberos Full
  Kerberos KDC
  Kerberos Password
  LDAP
  LDAPS
  LPD
  MSN
  MSN SSL
  Mail submission
  NFS
  OpenSSH
  POP3
  POP3S
  PeopleNearby
  SMTP
  SSH
  Socks
  Telnet
  Transmission
  Transparent Proxy
  VNC
  WWW
  WWW Cache
  WWW Full
  WWW Secure
  XMPP
  Yahoo
  qBittorrent
  svnserve

To get details about the app, like which ports it includes, type:

sudo ufw app info [app name]

sudo ufw app info DNS

Profile: DNS
Title: Internet Domain Name Server
Description: Internet Domain Name Server

Port:
  53

If you don't want to create rules by explicitly providing the port number(s), you can create your own application configurations. To do this, create a file in /etc/ufw/applications.d.

For example, here is what you would use for Plex:

cat /etc/ufw/applications.d/plexmediaserver

[PlexMediaServer]
title=Plex Media Server
description=This opens up PlexMediaServer for http (32400), upnp, and autodiscovery.
ports=32469/tcp|32413/udp|1900/udp|32400/tcp|32412/udp|32410/udp|32414/udp|32400/udp

Then you can enable it like any other app:

sudo ufw allow plexmediaserver

(Table of Contents)

I can't explain it any better than user FINESEC from https://serverfault.com/ did at: https://serverfault.com/a/447604/289829.

Fail2BAN scans log files of various applications such as apache, ssh or ftp and automatically bans IPs that show the malicious signs such as automated login attempts. PSAD on the other hand scans iptables and ip6tables log messages (typically /var/log/messages) to detect and optionally block scans and other types of suspect traffic such as DDoS or OS fingerprinting attempts. It's ok to use both programs at the same time because they operate on different level.

And, since we're already using UFW so we'll follow the awesome instructions by netson at https://gist.github.com/netson/c45b2dc4e835761fbccc to make PSAD work with UFW.

• http://www.cipherdyne.org/psad/
• http://www.cipherdyne.org/psad/docs/config.html
• https://www.thefanclub.co.za/how-to/how-install-psad-intrusion-detection-ubuntu-1204-lts-server
• https://serverfault.com/a/447604/289829
• https://serverfault.com/a/770424/289829
• https://gist.github.com/netson/c45b2dc4e835761fbccc-

1. Install psad.

   On Debian based systems:

   sudo apt install psad

2. Make a backup of /etc/psad/psad.conf:

   sudo cp /etc/psad/psad.conf /etc/psad/psad.conf.$(date +"%Y%m%d%H%M%S")

3. Review and update configuration options in /etc/psad/psad.conf. Pay special attention to these:

   Setting	Set To
   EMAIL_ADDRESSES	your email address(s)
   HOSTNAME	your server's hostname
   ENABLE_AUTO_IDS	ENABLE_AUTO_IDS Y;
   ENABLE_AUTO_IDS_EMAILS	ENABLE_AUTO_IDS_EMAILS Y;
   EXPECT_TCP_OPTIONS	EXPECT_TCP_OPTIONS Y;

   Check the configuration file psad's documentation at http://www.cipherdyne.org/psad/docs/config.html for more details.

4. Now we need to make some changes to ufw so it works with psad by telling ufw to log all traffic so psad can analyze it. Do this by editing two files and adding these lines at the end but before the COMMIT line.

   Make backups:

   sudo cp /etc/ufw/before.rules /etc/ufw/before.rules.$(date +"%Y%m%d%H%M%S")
   sudo cp /etc/ufw/before6.rules /etc/ufw/before6.rules.$(date +"%Y%m%d%H%M%S")

   Edit the files:

   • /etc/ufw/before.rules
   • /etc/ufw/before6.rules

   And add add this at the end but before the COMMIT line:

   # log all traffic so psad can analyze
   -A INPUT -j LOG --log-tcp-options --log-prefix "[IPTABLES] "
   -A FORWARD -j LOG --log-tcp-options --log-prefix "[IPTABLES] "
   

   Note: We're adding a log prefix to all the iptables logs. We'll need this for seperating iptables logs to their own file.

   For example:

   ...
   
   # log all traffic so psad can analyze
   -A INPUT -j LOG --log-tcp-options --log-prefix "[IPTABLES] "
   -A FORWARD -j LOG --log-tcp-options --log-prefix "[IPTABLES] "
   
   # don't delete the 'COMMIT' line or these rules won't be processed
   COMMIT
   

5. Now we need to reload/restart ufw and psad for the changes to take effect:

   sudo ufw reload
   
   sudo psad -R
   sudo psad --sig-update
   sudo psad -H

6. Analyze iptables rules for errors:

   sudo psad --fw-analyze

   [+] Parsing INPUT chain rules.
   [+] Parsing INPUT chain rules.
   [+] Firewall config looks good.
   [+] Completed check of firewall ruleset.
   [+] Results in /var/log/psad/fw_check
   [+] Exiting.
   

   Note: If there were any issues you will get an e-mail with the error.

7. Check the status of psad:

   sudo psad --Status

   [-] psad: pid file /var/run/psad/psadwatchd.pid does not exist for psadwatchd on vm
   [+] psad_fw_read (pid: 3444)  %CPU: 0.0  %MEM: 2.2
       Running since: Sat Feb 16 01:03:09 2019
   
   [+] psad (pid: 3435)  %CPU: 0.2  %MEM: 2.7
       Running since: Sat Feb 16 01:03:09 2019
       Command line arguments: [none specified]
       Alert email address(es): root@localhost
   
   [+] Version: psad v2.4.3
   
   [+] Top 50 signature matches:
           [NONE]
   
   [+] Top 25 attackers:
           [NONE]
   
   [+] Top 20 scanned ports:
           [NONE]
   
   [+] iptables log prefix counters:
           [NONE]
   
       Total protocol packet counters:
   
   [+] IP Status Detail:
           [NONE]
   
       Total scan sources: 0
       Total scan destinations: 0
   
   [+] These results are available in: /var/log/psad/status.out
   

(Table of Contents)

There will come a time when you'll need to look through your iptables logs. Having all the iptables logs go to their own file will make it a lot easier to find what you're looking for.

• https://blog.shadypixel.com/log-iptables-messages-to-a-separate-file-with-rsyslog/
• https://gist.github.com/netson/c45b2dc4e835761fbccc
• https://www.rsyslog.com/doc/v8-stable/configuration/actions.html

1. The first step is by telling your firewall to prefix all log entries with some unique string. If you're using iptables directly, you would do something like --log-prefix "[IPTABLES] " for all the rules. We took care of this in step step 4 of installing psad.

2. After you've added a prefix to the firewall logs, we need to tell rsyslog to send those lines to its own file. Do this by creating the file /etc/rsyslog.d/10-iptables.conf and adding this:

   :msg, contains, "[IPTABLES] " /var/log/iptables.log
   & stop
   

   If you're expecting a lot if data being logged by your firewall, prefix the filename with a - "to omit syncing the file after every logging". For example:

   :msg, contains, "[IPTABLES] " -/var/log/iptables.log
   & stop
   

   Note: Remember to change the prefix to whatever you use.

3. Since we're logging firewall messages to a different file, we need to tell psad where the new file is. Edit /etc/psad/psad.conf and set IPT_SYSLOG_FILE to the path of the log file. For example:

   IPT_SYSLOG_FILE /var/log/iptables.log;
   

4. Restart psad and rsyslog to activate the changes (or reboot):

   sudo psad -R
   sudo psad --sig-update
   sudo psad -H
   sudo service rsyslog restart

5. The last thing we have to do is tell logrotate to rotate the new log file so it doesn't get to big and fill up our disk. Create the file /etc/logrotate.d/iptables and add this:

   /var/log/iptables.log
   {
       rotate 7
       daily
       missingok
       notifempty
       delaycompress
       compress
       postrotate
           invoke-rc.d rsyslog rotate > /dev/null
       endscript
   }
   

(Table of Contents)

A firewall will board up all the doors and windows you don't want anyone using so nobody can see they are even there. But what about the doors and windows you want visible so approved folks can use them? Even if the door is locked, how do you ensure that someone doesn't try to force their way in?

That is where Fail2ban comes in. It will monitor network traffic/logs and prevent intrusions by blocking suspicious activity (e.g. multiple successive failed connections in a short time-span).

• network monitoring for suspicious activity with automatic banning of offending IPs

• As of right now, the only thing running on this server is SSH so we'll want Fail2ban to monitor SSH and ban as necessary.
• As you install other programs, you'll need to create/configure the appropriate jails and enable them.

• https://www.fail2ban.org/
• https://blog.vigilcode.com/2011/05/ufw-with-fail2ban-quick-secure-setup-part-ii/
• https://dodwell.us/security/ufw-fail2ban-portscan.html
• https://www.howtoforge.com/community/threads/fail2ban-and-ufw-on-debian.77261/

1. Install fail2ban.

   On Debian based systems:

   sudo apt install fail2ban

2. We don't want to edit /etc/fail2ban/fail2ban.conf or /etc/fail2ban/jail.conf because a future update may overwrite those so we'll update a local copy instead. Add this to /etc/fail2ban/jail.local after replacing [LAN SEGMENT] and [your email] with the appropriate values:

   [DEFAULT]
   # the IP address range we want to ignore
   ignoreip = 127.0.0.1/8 [LAN SEGMENT]
   
   # who to send e-mail to
   destemail = [your e-mail]
   
   # who is the email from
   sender = [your e-mail]
   
   # since we're using exim4 to send emails
   mta = mail
   
   # get email alerts
   action = %(action_mwl)s
   

   Note: Your server will need to be able to send e-mails so Fail2ban can let you know of suspicious activity and when it banned an IP.

3. We need to create a jail for ssh that tells fail2ban to look at ssh logs and use ufw to ban/unban IPs as needed. Create a jail for ssh by adding this to /etc/fail2ban/jail.d/ssh.local:

   [sshd]
   enabled = true
   banaction = ufw
   port = ssh
   filter = sshd
   logpath = %(sshd_log)s
   maxretry = 5
   

4. In the above we tell fail2ban to use the ufw as the banaction. Fail2ban ships with an action configuration file for ufw. You can see it in /etc/fail2ban/action.d/ufw.conf

5. Enable fail2ban and the jail for SSH:

   sudo fail2ban-client start
   sudo fail2ban-client reload
   sudo fail2ban-client add sshd

6. To check the status:

   sudo fail2ban-client status

   Status
   |- Number of jail:      1
   `- Jail list:   sshd
   

   sudo fail2ban-client status sshd

   Status for the jail: sshd
   |- Filter
   |  |- Currently failed: 0
   |  |- Total failed:     0
   |  `- File list:        /var/log/auth.log
   `- Actions
      |- Currently banned: 0
      |- Total banned:     0
      `- Banned IP list:
   

I have not needed to create a custom jail yet. Once I do, and I figure out how, I will update this guide. Or, if you know how please help contribute.

To unban an IP use this command:

fail2ban-client set [jail] unbanip [IP]

[jail] is the name of the jail that has the banned IP and [IP] is the IP address you want to unban. For example, to unaban 192.168.1.100 from SSH you would do:

fail2ban-client set sshd unbanip 192.168.1.100

(Table of Contents)

sudo sysctl -p >/dev/null

(Table of Contents)

(Table of Contents)

Cannot open access to console, the root account is locked.

See sulogin(8) man page for more details.

Press Enter to continue.

(Table of Contents)

(Table of Contents)

By default, accounts can use any password they want, including bad ones. pwquality/pam_pwquality addresses this security gap by providing "a way to configure the default password quality requirements for the system passwords" and checking "its strength against a system dictionary and a set of rules for identifying poor choices."

• enforced strong passwords

1. Install libpam-pwquality.

   On Debian based systems:

   sudo apt install libpam-pwquality

2. Tell PAM to use libpam-pwquality to enforce strong passwords by editing the file /etc/pam.d/common-password and change the line that starts like this:

   password        requisite                       pam_pwquality.so
   

   to this:

   password        requisite                       pam_pwquality.so retry=3 minlen=10 difok=3 ucredit=-1 lcredit=-1 dcredit=-1 ocredit=-1 maxrepeat=3 gecoschec
   

   The above options are:

   • retry=3 = prompt user 3 times before returning with error.
   • minlen=10 = the minimum length of the password, factoring in any credits (or debits) from these:
     • dcredit=-1 = must have at least one digit
     • ucredit=-1 = must have at least one upper case letter
     • lcredit=-1 = must have at least one lower case letter
     • ocredit=-1 = must have at least one non-alphanumeric character
   • difok=3 = at least 3 characters from the new password cannot have been in the old password
   • maxrepeat=3 = allow a maximum of 3 repeated characters
   • gecoschec = do not allow passwords with the account's name

   For the lazy:

   sudo cp --preserve /etc/pam.d/common-password /etc/pam.d/common-password.$(date +"%Y%m%d%H%M%S")
   
   sudo sed -i -r -e "s/^(password\s+requisite\s+pam_pwquality.so)(.*)$/# \1\2         # commented by $(whoami) on $(date +"%Y-%m-%d @ %H:%M:%S")\n\1 retry=3 minlen=10 difok=3 ucredit=-1 lcredit=-1 dcredit=-1 ocredit=-1 maxrepeat=3 gecoschec         # added by $(whoami) on $(date +"%Y-%m-%d @ %H:%M:%S")/" /etc/pam.d/common-password

(Table of Contents)

Even though SSH is a pretty good security guard for your doors and windows, it is still a visible door that bad-actors can see and try to brute-force in. Fail2ban will monitor for these brute-force attempts but there is no such thing as being too secure.

Using Two Factor Authentication (2FA) / Multi Factor Authentication (MFA) requires anyone entering to have two keys to enter which makes it harder for bad actors. The two keys are:

1. Their password
2. A 6 digit token that changes every 30 seconds

Without both keys, they won't be able to get in.

Many folks might find the experience cumbersome or annoying. And, acesss to your system is dependent on the accompanying authenticator app that generates the code.

• 2FA/MFA enabled for all SSH connections

• Before you do this, you should have an idea of how 2FA/MFA works and you'll need an authenticator app on your phone to continue.
• We'll use google-authenticator-libpam.
• With the below configuration, a user will only need to enter their 2FA/MFA code if they are logging on with their password but not not if they are using SSH public/private keys. Check the documentation on how to change this behavior to suite your requirements.

• https://github.com/google/google-authenticator-libpam

1. Install it libpam-google-authenticator.

   On Debian based systems:

   sudo apt install libpam-google-authenticator

2. Make sure you're logged in as the ID you want to enable 2FA/MFA for and execute google-authenticator to create the necessary token data:

   google-authenticator

   Do you want authentication tokens to be time-based (y/n) y
   https://www.google.com/chart?chs=200x200&chld=M|0&cht=qr&chl=otpauth://totp/user@host%3Fsecret%3DR4ZWX34FQKZROVX7AGLJ64684Y%26issuer%3Dhost
   
   ...
   
   Your new secret key is: R3NVX3FFQKZROVX7AGLJUGGESY
   Your verification code is 751419
   Your emergency scratch codes are:
     12345678
     90123456
     78901234
     56789012
     34567890
   
   Do you want me to update your "/home/user/.google_authenticator" file (y/n) y
   
   Do you want to disallow multiple uses of the same authentication
   token? This restricts you to one login about every 30s, but it increases
   your chances to notice or even prevent man-in-the-middle attacks (y/n) Do you want to disallow multiple uses of the same authentication
   token? This restricts you to one login about every 30s, but it increases
   your chances to notice or even prevent man-in-the-middle attacks (y/n) y
   
   By default, tokens are good for 30 seconds. In order to compensate for
   possible time-skew between the client and the server, we allow an extra
   token before and after the current time. If you experience problems with
   poor time synchronization, you can increase the window from its default
   size of +-1min (window size of 3) to about +-4min (window size of
   17 acceptable tokens).
   Do you want to do so? (y/n) y
   
   If the computer that you are logging into isn't hardened against brute-force
   login attempts, you can enable rate-limiting for the authentication module.
   By default, this limits attackers to no more than 3 login attempts every 30s.
   Do you want to enable rate-limiting (y/n) y
   

   Notice this is not run as root.

   Select default option (y in most cases) for all the questions it asks and remember to save the emergency scratch codes.

3. Now we need to enable it as an authentication method for SSH by adding this line to /etc/pam.d/sshd:

   auth       required     pam_google_authenticator.so nullok
   

   Check here for what nullok means.

   For the lazy:

   sudo cp --preserve /etc/pam.d/sshd /etc/pam.d/sshd.$(date +"%Y%m%d%H%M%S")
   
   echo -e "\nauth       required     pam_google_authenticator.so nullok         # added by $(whoami) on $(date +"%Y-%m-%d @ %H:%M:%S")" | sudo tee -a /etc/pam.d/sshd

4. Tell SSH to levearage it by adding this line in /etc/ssh/sshd_config:

   ChallengeResponseAuthentication yes
   

   For the lazy:

   sudo cp --preserve /etc/ssh/sshd_config /etc/ssh/sshd_config.$(date +"%Y%m%d%H%M%S")
   
   echo -e "\nChallengeResponseAuthentication yes         # added by $(whoami) on $(date +"%Y-%m-%d @ %H:%M:%S")" | sudo tee -a /etc/ssh/sshd_config

5. Restart ssh:

   sudo service sshd restart

(Table of Contents)

It is important to keep your server up-to-date with all security patches. Otherwise you're at risk of known security vulnerabilities that bad-actors could use to gain unauthorized access to your server.

You have two options:

• Configure your server for unattended updates
• Be notified when updates are available

Which option you pick is up to you but I prefer being notified by e-mail when updates are available. This is because an update may break something else. If the server updates it-self then I may not know and, if I do find out, I'll have to scramble to fix it. If it e-mails me when updates are available, then I can do the updates at my schedule.

• Your server will need a way to send e-mails for this to work

• https://wiki.debian.org/UnattendedUpgrades#apt-listchanges
• https://www.cyberciti.biz/faq/apt-get-apticron-send-email-upgrades-available/
• https://www.unixmen.com/how-to-get-email-notifications-for-new-updates-on-debianubuntu/

1. Install apticron.

   On Debian based systems:

   sudo apt install apticron

2. Set the value of EMAIL in /etc/apticron/apticron.conf to your e-mail address.

(Table of Contents)

As you use your system, and you install and uninstall software, you'll eventually end up with orphaned, or unused software/packages/libraries. You don't need to remove them, but if you don't need them, why keep them? When security is a priority, anything not explicitly needed is a potential security threat. You want to keep your server as trimmed and lean as possible.

• Each distribution manages software/packages/libraries differently so how you find and remove orphaned packages will be different.
• So far I only have steps for Debian; I will add for other distributions as I learn how.

For Debian based distributions, you can use deborphan to find orphaned packages.

1. Install deborphan.

   sudo apt install deborphan

2. Run deborphan as root to see a list of orphaned packages:

   sudo deborphan

   libxapian30
   libpipeline1
   

3. Pass it's output to apt to remove them:

   sudo apt --autoremove purge $(deborphan)

   You will want to repeatedly run this command until deborphan no longer returns any orphaned packages.

   For the lazy:

   while [[ $(deborphan | wc -l) != 0 ]] ; do
       sudo apt --autoremove purge $(deborphan)
   done

(Table of Contents)

From https://cisofy.com/lynis/:

Lynis is a battle-tested security tool for systems running Linux, macOS, or Unix-based operating system. It performs an extensive health scan of your systems to support system hardening and compliance testing.

• Lynis installed

• CISOFY offers packages for many distributions. Check https://packages.cisofy.com/ for distribution specific installation instructions.

• https://cisofy.com/documentation/lynis/get-started/
• https://packages.cisofy.com/community/#debian-ubuntu
• https://thelinuxcode.com/audit-lynis-ubuntu-server/
• https://www.vultr.com/docs/install-lynis-on-debian-8

1. Install lynis. https://cisofy.com/lynis/#installation has detailed instructions on how to install it for your distribution.

   On Debian based systems, using CISOFY's community software repository:

   sudo wget -O - https://packages.cisofy.com/keys/cisofy-software-public.key | sudo apt-key add -
   sudo apt install apt-transport-https
   sudo echo "deb https://packages.cisofy.com/community/lynis/deb/ stable main" | sudo tee /etc/apt/sources.list.d/cisofy-lynis.list
   sudo apt update
   sudo apt install lynis

2. Update it:

   sudo lynis update info

3. Run a security audit:

   sudo lynis audit system

   This will scan your server, report its audit findings, and at the end it will give you suggestions. Spend some time going through the output and address gaps as necessary.

(Table of Contents)

For any questions, comments, concerns, feedback, or issues, submit a new issue.

(Table of Contents)

• https://github.com/pratiktri/server_init_harden - Bash script that automates few of the tasks that you need to perform on a new Linux server to give it basic amount security.
• https://security.utexas.edu/os-hardening-checklist/linux-7 - Red Hat Enterprise Linux 7 Hardening Checklist
• https://cloudpro.zone/index.php/2018/01/18/debian-9-3-server-setup-guide-part-1/ - # Debian 9.3 server setup guide
• https://blog.vigilcode.com/2011/04/ubuntu-server-initial-security-quick-secure-setup-part-i/ - Ubuntu Server Initial Security guide

(Table of Contents)

• everyone from /r/linuxquestions who provided feedback on this guide
• everyone from /r/selfhosted who provided feedback on this guide

(Table of Contents)

This guide comes with ABSOLUTELY NO WARRANTY. Use with caution. I take no responsibility for anything, related to or not related to this guide.

(Table of Contents)