RGB-slider is an application to control a RGB LED on your Raspberry Pi using a web interface.

Rgb-slider is using NodeJS to provide a web interface to send some command to a Pi-Blaster daemon to control the intensity of the three colours of a RGB LED using Pulse Width Modulation (PWM).

When you run the application, it will start a web server listening for connections on the port 3000. The server is hosting a single web page (index.html) displaying 3 horizontal sliders: one for each colour: red, green and blue. The page is a clone (with tiny modifications) of the Jquery UI slider demo you can find here.

When you access the page and move a slider, the value of this particular colour is sent to the server using a web service. The value, between 0 and 255, is divided by 255 to get a value between 0 and 1. This final value is passed as a PWM value to the pi-blaster daemon.

The default GPIO pin configuration is:

Colour | GPIO Pin Number
 ---   | ---
 Red   | 17
 Green | 18
 Blue  | 22

You just have to wire your LED on the above pins (don't forget the resistors), start the application and use a browser to connect to the page to play with the sliders.

On your Raspberry you need the following programs:

• NodeJS and npm, I'm using the version available here, it's working fine on my Raspberry A+.
• pi-blaster daemon, available here.
• git, to clone the repository - on Raspbian you can simply do sudo apt-get install git - alternatively you can download a zip file from my Github.

You also need a RGB LED wired to the GPIO. Have a look at this video.

• Clone the repo: git clone https://github.com/Kylir/rgb-slider.git
• Optional: Edit the index.js to change the GPIO pins
• Install the dependencies using the command npm install
• Start the application by typing node index.js
• Go to the slider page (point your browser to the IP of your Raspberry - port 3000). You can use the command sudo ip addr show to see what your IP is. Add the http:// prefix and the :3000 suffix. For instance, I can access my application using http://192.168.1.74:3000. Please note that depending on your network configuration, your application is potentially accessible to anyone in the world...

The application is using two modules:

• Express JS to create the server and the web services.
• Pi-blaster.js to talk to the pi-blaster daemon.

This toy application demonstrates that it is not really difficult to have a web interface to control something plugged on your GPIO. You can use the same kind of idea to control a robot remotely or to switch on and off your lights at home while you are on holiday. Use your imagination!

Also, because it is so easy to build a web application using NodeJS, there are a lot of articles on the subject. Have a look for instance at the Adafruit tutorial here.

There is another NodeJS module really nice to use to play with the GPIO: onoff. With this module you can read from the GPIO, opening a lot more possibilities.

MIT License: see LICENSE.txt