Neutron supermirror

A neutron supermirror is a highly polished, layered material used to reflect neutron beams. Supermirrors are a special case of multi-layer neutron reflectors with varying layer thicknesses.^[1]

The first neutron supermirror concept was proposed by Ferenc Mezei [hu],^[2] inspired by earlier work with X-rays.

Supermirrors are produced by depositing alternating layers of strongly contrasting substances, such as nickel and titanium, on a smooth substrate. A single layer of high refractive index material (e.g. nickel) exhibits total external reflection at small grazing angles up to a critical angle $\theta _{c}$ . For nickel with natural isotopic abundances, $\theta _{c}$ in degrees is approximately $0.1\cdot \lambda$ where $\lambda$ is the neutron wavelength in Angstrom units.

A mirror with a larger effective critical angle can be made by exploiting diffraction (with non-zero losses) that occurs from stacked multilayers.^[3] The critical angle of total reflection, in degrees, becomes approximately $0.1\cdot \lambda \cdot m$ , where $m$ is the "m-value" relative to natural nickel. $m$ values in the range of 1–3 are common, in specific areas for high-divergence (e.g. using focussing optics near the source, choppers, or experimental areas) m=6 is readily available.

Nickel has a positive scattering cross section, and titanium has a negative scattering cross section, and in both elements the absorption cross section is small, which makes Ni-Ti the most efficient technology with neutrons. The number of Ni-Ti layers needed increases rapidly as $\propto m^{z}$ , with $z$ in the range 2–4, which affects the cost. This has a strong bearing on the economic strategy of neutron instrument design.^[4]

External links

Hungarian inventions

References

^ Chupp, T. "Neutron Optics and Polarization" (PDF). Retrieved 16 April 2019.
^ Mezei, F. (1976). "Novel polarized neutron devices: supermirror and spin component amplifier" (PDF). Communications on Physics (London). 1 (3): 81–85.
^ Hayter, J. B.; Mook, H. A. (1989). "Discrete Thin-Film Multilayer Design for X-ray and Neutron Supermirrors". Journal of Applied Crystallography. 22 (1): 35–41. Bibcode:1989JApCr..22...35H. doi:10.1107/S0021889888010003. S2CID 94163755.
^ Bentley, P. M. (2020). "Instrument suite cost optimisation in a science megaproject". Journal of Physics Communications. 4 (4): 045014. Bibcode:2020JPhCo...4d5014B. doi:10.1088/2399-6528/ab8a06.

This particle physics–related article is a stub. You can help Wikipedia by expanding it.

This technology-related article is a stub. You can help Wikipedia by expanding it.

[1] Chupp, T. "Neutron Optics and Polarization" (PDF). Retrieved 16 April 2019.

[2] Mezei, F. (1976). "Novel polarized neutron devices: supermirror and spin component amplifier" (PDF). Communications on Physics (London). 1 (3): 81–85.

[3] Hayter, J. B.; Mook, H. A. (1989). "Discrete Thin-Film Multilayer Design for X-ray and Neutron Supermirrors". Journal of Applied Crystallography. 22 (1): 35–41. Bibcode:1989JApCr..22...35H. doi:10.1107/S0021889888010003. S2CID 94163755.

[4] Bentley, P. M. (2020). "Instrument suite cost optimisation in a science megaproject". Journal of Physics Communications. 4 (4): 045014. Bibcode:2020JPhCo...4d5014B. doi:10.1088/2399-6528/ab8a06.

[1]

[2]

[3]

[4]