Jump to content

Kearsley Power Station

Coordinates: 53°32′22″N 2°21′33″W / 53.53944°N 2.35917°W / 53.53944; -2.35917
From Wikipedia, the free encyclopedia

Kearsley Power Station
Kearsley Power Station
Map
CountryEngland
LocationGreater Manchester
Coordinates53°32′22″N 2°21′33″W / 53.53944°N 2.35917°W / 53.53944; -2.35917
StatusDecommissioned and demolished
Commission date1929
Decommission date1980
OperatorsLancashire Electric Power Company
(1929–1948)
British Electricity Authority
(1948–1955)
Central Electricity Authority
(1955–1957)
Central Electricity Generating Board
(1948–1981)
Thermal power station
Primary fuelCoal
Cooling towers5
Cooling sourceCirculating water cooling towers
Power generation
Units operational2 × 52 MW, 2 ×51.66 MW (1971)
Units decommissionedAll decommissioned
Annual net output294.949 GWh (1971)
External links
CommonsRelated media on Commons

grid reference SD763047

Kearsley Power Station was a coal-fired power station in Stoneclough, near Kearsley, Bolton, England. It was designed in 1927 by Dr H.F. Parshall for the Lancashire Electric Power Company.[1] The original installation was known as Kearsley 'A', comprising two British Thomson-Houston (B.T.H.) turbo-alternators rated at 32.25 megawatts each. Further extensions became Kearsley 'B' (1936/38), with two more B.T.H. turbo-alternators each capable of producing 51.6 megawatts. Finally Kearsley 'C' (1949) was completed with two more B.T.H. machines rated at 52 megawatts each. The station closed in 1980 when only 'B' station remained operational. The 5 cooling towers were demolished during the week of 14 May 1985.

History

[edit]

The power station opened in 1929 by the Earl of Derby, was to become highly regarded within the industry due to its excellent record of thermal efficiency. The power station went on to set new records for low coal consumption in relation to power output. Due to increased power demands there were a further two extensions made to the site in 1936 and 1949, one of which was a new cooling tower reported at the time to be the tallest in the world.[2] The 1936 extension was attended by the Earl of Derby, son of the original Earl of Derby who had opened the company's Radcliffe Power Station 31 years previously.[2]

Originally 'A' Station had four cast iron chimneys but these were replaced by two brick built stacks, each 275 feet high. The later 'B' and 'C' stations each had two brick chimneys of 325 feet high. When completed the adjoining boiler houses totalled 255 yards and the entire buildings and chimneys used several million bricks. It is estimated that the six chimneys alone used at least 8 million bricks.

By 1937 the station supplied a maximum load of 101,800 kW of electricity.[2]

When completed in 1949 there were 24 coal burning boilers at Kearsley Power Station,[3] each separate station had eight boilers with six or seven boilers needed to operate each station on full load. There was always spare boiler capacity; the original operators the Lancashire Electric Power Company learning from its experiences at Padiham Power Station which was under boilered. Kearsley 'A' Station boilers burned 5 tons of coal each on full load, and the larger 'B' and 'C' Station boilers consumed 8 tons of coal an hour on full load. Until 1970 there were continuous improvements to the boilers and plant at Kearsley to improve efficiency and reduce running costs.

The electricity output from Kearsley LP and HP power stations was:[4][5][6][7][8]

Electricity sent out, GWh
Year LP station output GWh HP station output GWh
1946 933.52
1953/4 102.21 1106.26
1954/5 92.98 873.26
1955/6 63.46 5.42
1956/7 66.80 824.56
1957/8 74.32 590.24
1960/1 700.366
1961/2 707.587
1962/3 746.484
1966/7 793.59
1971/2 294.95
1978/9 36.97

By 1965 the power station (as stated in a CEGB advertisement) employed around 500 people and could produce enough electricity to supply the area of Farnworth and much of Bolton recorded at 272,000 kilowatts of electricity. During 1965 the original 'A' station boilers were converted from coal burning to heavy oil firing. Each of the six boilers needed to run the turbines at full load consumed 5,500 gallons of oil per hour. In 1971 the boilers had a combined steam generating capacity of 3.2 million pounds per hour (403.2 kg/s). The steam conditions were 300/600 psi (20.7/41.4 bar) and 375/427 °C.[5] The 'A' Station was mothballed after the Arab-Israeli conflict of the early 1970s that resulted in a huge increase in oil prices. In 1979 experiments were carried out at the station in burning the town of Bolton's refuse to produce electricity.[9] This was not the first occasion that the station had burned such refuse, in 1962 tobacco offal, battery cases, bathroom fittings and oil saturated clay were burnt as fuel additives in an experiment to establish their calorific value.[10]

The station closed on 27 October 1980. By this time its generating capacity had been lowered to only 96 MW.[11]

References

[edit]
  1. ^ "Bristol Tramways Power Stations 1895 - 1941". Marcus Palmén.
  2. ^ a b c Lancashire Electric Light and Power. The Times newspaper, page 22. 19 February 1922.
  3. ^ The Record Breakers Of The Lancashire Electric Power Company
  4. ^ Garrett, Frederick C., ed. (1959). Garcke's Manual of Electricity Supply vol.56. London: Electrical Press. pp. A-124.
  5. ^ a b CEGB (1972). CEGB Statistical Yearbook 1972. London: CEGB. p. 17.
  6. ^ CEGB (1979). CEGB Statistical Yearbook 1978-79. London: CEGB. p. 8. ISBN 0902543598.
  7. ^ CEGB Annual report and Accounts, 1961, 1962 & 1963
  8. ^ Electricity Commission, Generation of Electricity in Great Britain year ended 31st December 1946. London: HMSO, 1947.
  9. ^ Entwistel, Kathryn. "17. Modern Industry: The Power Station". Kearsley Resource Pack. Bolton Environmental Education Project.
  10. ^ Power station tests with waste products. The Times newspaper, page 15. 12 July 1962.
  11. ^ Mr. Redmond (16 January 1984). "Coal-fired Power Stations". Parliamentary Debates (Hansard). Retrieved 1 September 2009.
[edit]