In numerical analysis, an incomplete Cholesky factorization of a symmetric positive definite matrix is a sparse approximation of the Cholesky factorization. An incomplete Cholesky factorization is often used as a preconditioner for algorithms like the conjugate gradient method.
The Cholesky factorization of a positive definite matrix A is A = LL* where L is a lower triangular matrix. An incomplete Cholesky factorization is given by a sparse lower triangular matrix K that is in some sense close to L. The corresponding preconditioner is KK*.
One popular way to find such a matrix K is to use the algorithm for finding the exact Cholesky decomposition in which K has the same sparsity pattern as A (any entry of K is set to zero if the corresponding entry in A is also zero). This gives an incomplete Cholesky factorization which is as sparse as the matrix A.
Motivation
editConsider the following matrix as an example:
If we apply the full regular Cholesky decomposition, it yields:
And, by definition:
However, by applying Cholesky decomposition, we observe that some zero elements in the original matrix end up being non-zero elements in the decomposed matrix, like elements (4,2), (5,2) and (5,3) in this example. These elements are known as "fill-ins".
This is not an issue per se, but it is very problematic when working with sparse matrices, since the fill-ins generation is mostly unpredictable and reduces the matrix sparsity, impacting the efficiency of sparse matrix algorithms.
Therefore, given the importance of the Cholesky decomposition in matrix calculations, it is extremely relevant to repurpose the regular method, so as to eliminate the fill-ins generation. The incomplete Cholesky factorization does exactly that, by generating a matrix L similar to the one generated by the regular method, but conserving the zero elements in the original matrix.
Naturally:
Multiplying matrix L generated by incomplete Cholesky factorization by its transpose won't yield the original matrix, but a similar one.
Algorithm
editFor from to :
For from to :
Implementation
editImplementation of the incomplete Cholesky factorization in the GNU Octave language. The factorization is stored as a lower triangular matrix, with the elements in the upper triangle set to zero.
function a = ichol(a)
n = size(a,1);
for k = 1:n
a(k,k) = sqrt(a(k,k));
for i = (k+1):n
if (a(i,k) != 0)
a(i,k) = a(i,k)/a(k,k);
endif
endfor
for j = (k+1):n
for i = j:n
if (a(i,j) != 0)
a(i,j) = a(i,j) - a(i,k)*a(j,k);
endif
endfor
endfor
endfor
for i = 1:n
for j = i+1:n
a(i,j) = 0;
endfor
endfor
endfunction
Sparse example
editConsider again the matrix displayed in the beginning of this article. Since it is symmetric and the method only uses the lower triangular elements, we can represent it by:
More specifically, in its sparse form as a coordinate list, sweeping rows first:
Value 5 -2 -2 -2 5 -2 5 -2 5 -2 5
Row 1 2 4 5 2 3 3 4 4 5 5
Col 1 1 1 1 2 2 3 3 4 4 5
Then, we take the square root of (1,1) and divide the other (i,1) elements by the result:
Value 2.24 -0.89 -0.89 -0.89 | 5 -2 5 -2 5 -2 5
Row 1 2 4 5 | 2 3 3 4 4 5 5
Col 1 1 1 1 | 2 2 3 3 4 4 5
After that, for all the other elements with column greater than 1, calculate (i,j)=(i,j)-(i,1)*(j,1) if (i,1) and (j,1) exist. For example: (5,4) = (5,4)-(5,1)*(4,1) = -2 -(-0.89*-0.89) = -2.8.
Value 2.24 -0.89 -0.89 -0.89 | 4.2 -2 5 -2 4.2 -2.8 4.2
Row 1 2 4 5 | 2 3 3 4 4 5 5
Col 1 1 1 1 | 2 2 3 3 4 4 5
↑ ↑ ↑ ↑
The elements (2,2), (4,4), (5,4) and (5,5) (marked with an arrow) have been recalculated, since they obey this rule. On the other hand, the elements (3,2), (3,3) and (4,3) won't be recalculated since the element (3,1) doesn't exist, even though the elements (2,1) and (4,1) exist.
Now, repeat the process, but for (i,2). Take the square root of (2,2) and divide the other (i,2) elements by the result:
Value 2.24 -0.89 -0.89 -0.89 | 2.05 -0.98 | 5 -2 4.2 -2.8 4.2
Row 1 2 4 5 | 2 3 | 3 4 4 5 5
Col 1 1 1 1 | 2 2 | 3 3 4 4 5
Again, for elements with column greater than 2, calculate (i,j)=(i,j)-(i,2)*(j,2) if (i,2) and (j,2) exist:
Value 2.24 -0.89 -0.89 -0.89 | 2.05 -0.98 | 4.05 -2 4.2 -2.8 4.2
Row 1 2 4 5 | 2 3 | 3 4 4 5 5
Col 1 1 1 1 | 2 2 | 3 3 4 4 5
↑
Repeat for (i,3). Take the square root of (3,3) and divide the other (i,3):
Value 2.24 -0.89 -0.89 -0.89 2.05 -0.98 | 2.01 -0.99 | 4.2 -2.8 4.2
Row 1 2 4 5 2 3 | 3 4 | 4 5 5
Col 1 1 1 1 2 2 | 3 3 | 4 4 5
For elements with column greater than 3, calculate (i,j)=(i,j)-(i,3)*(j,3) if (i,3) and (j,3) exist:
Value 2.24 -0.89 -0.89 -0.89 2.05 -0.98 | 2.01 -0.99 | 3.21 -2.8 4.2
Row 1 2 4 5 2 3 | 3 4 | 4 5 5
Col 1 1 1 1 2 2 | 3 3 | 4 4 5
↑
Repeat for (i,4). Take the square root of (4,4) and divide the other (i,4):
Value 2.24 -0.89 -0.89 -0.89 2.05 -0.98 2.01 -0.99 | 1.79 -1.56 | 4.2
Row 1 2 4 5 2 3 3 4 | 4 5 | 5
Col 1 1 1 1 2 2 3 3 | 4 4 | 5
For elements with column greater than 4, calculate (i,j)=(i,j)-(i,4)*(j,4) if (i,4) and (j,4) exist:
Value 2.24 -0.89 -0.89 -0.89 2.05 -0.98 2.01 -0.99 | 1.79 -1.56 | 1.76
Row 1 2 4 5 2 3 3 4 | 4 5 | 5
Col 1 1 1 1 2 2 3 3 | 4 4 | 5
↑
Finally take the square root of (5,5):
Value 2.24 -0.89 -0.89 -0.89 2.05 -0.98 2.01 -0.99 1.79 -1.56 | 1.33
Row 1 2 4 5 2 3 3 4 4 5 | 5
Col 1 1 1 1 2 2 3 3 4 4 | 5
Expanding the matrix to its full form:
Note that in this case no fill-ins were generated compared to the original matrix. The elements (4,2), (5,2) and (5,3) are still zero.
However, if we perform the multiplication of L to its transpose:
We get a matrix slightly different from the original one, since the decomposition didn't take into account all the elements, in order to eliminate the fill-ins.
Sparse implementation
editThe sparse version for the incomplete Cholesky factorization (the same procedure presented above) implemented in MATLAB can be seen below. Naturally, MATLAB has its own means for dealing with sparse matrixes, but the code below was made explicit for pedagogic purposes. This algorithm is efficient, since it treats the matrix as a sequential 1D array, automatically avoiding the zero elements.
function A=Sp_ichol(A)
n=size(A,1);
ncols=A(n).col;
c_end=0;
for col=1:ncols
is_next_col=0;
c_start=c_end+1;
for i=c_start:n
if A(i).col==col % in the current column (col):
if A(i).col==A(i).row
A(i).val=sqrt(A(i).val); % take the square root of the current column's diagonal element
div=A(i).val;
else
A(i).val=A(i).val/div; % divide the other current column's elements by the square root of the diagonal element
end
end
if A(i).col>col % in the next columns (col+1 ... ncols):
if is_next_col==0
c_end=i-1;
is_next_col=1;
end
v1=0;
v2=0;
for j=c_start:c_end
if A(j).col==col
if A(j).row==A(i).row % search for current column's (col) elements A(j) whose row index is the same as current element's A(i) row index
v1=A(j).val;
end
if A(j).row==A(i).col % search for current column's (col) elements A(j) whose row index is the same as current element's A(i) column index
v2=A(j).val;
end
if v1~=0 && v2~=0 % if these elements exist in the current column (col), recalculate the current element A(i):
A(i).val=A(i).val-v1*v2;
break;
end
end
end
end
end
end
end
References
edit- Incomplete Cholesky factorization at CFD Online wiki
- Golub, Gene H.; Van Loan, Charles F. (1996), Matrix Computations (3rd ed.), Johns Hopkins, ISBN 978-0-8018-5414-9. See Section 10.3.2.