Wikipedia

Bridgton and Saco River Railroad

The Bridgton and Saco River Railroad (B&SR) was a 2 ft (610 mm) narrow gauge railroad that operated in the vicinity of Bridgton and Harrison, Maine. It connected with the Portland and Ogdensburg Railroad (later Maine Central Railroad Mountain Division) from Portland, Maine, to St. Johnsbury, Vermont, near the town of Hiram on the Saco River.

Bridgton and Saco River Railroad
Map
Bridgton locomotive #8 at the station at Bridgton Jct. sometime in the 1930's.
Overview
HeadquartersBridgton
LocaleMaine
Dates of operation1883–1941
Technical
Track gauge2 ft (610 mm)
Length21 miles (34 km)
Bridgton & Harrison Railway (formerly Bridgton & Saco River Railroad) fan trip departing Bridgton Jct. on June 27th, 1937.

History

edit
 
Map of the Bridgton & Saco River Railroad from 1898 to 1930.

B&SR design was based on experience of the Sandy River Railroad. Hinkley Locomotive Works modified their 2 ft (610 mm) gauge Forney design to run boiler first with an extended frame similar to that installed on Sandy River Railroad #1 following a wreck in early 1882. The successful design of the Bridgton Hinkleys was subsequently repeated for the Monson Railroad and the Franklin and Megantic Railway. Construction began in 1882, and trains were running to Bridgton by early 1883.[1]

B&SR used early profits to replace wooden trestles with earthen fills. A 14-foot (4.3 m) granite masonry arch was constructed over Hancock Brook in 1895.[2] Track was extended to Harrison with 35# steel rails in 1898.[3] Trestles on the Harrison extension had been replaced by earthen fills and plate girder bridges by 1906.[4] Original Hinkley locomotives #1-2 were replaced by #5-6 of an improved design with pilot wheels.[5] B&SR then replaced the original 30 lb/yd (14.9 kg/m) steel rails from Bridgton Junction to Bridgton with 48 lb/yd (23.8 kg/m) and 50 lb/yd (24.8 kg/m) steel rails from 1907 to 1910 before Maine Central Railroad secured control of the B&SR in 1912.[6][7][8]

Under Maine Central operation, there were 4 mixed train round trips daily from Harrison to Bridgton Junction and return. The first left Harrison at 5:15 am and the last returned to Harrison at 8:45 pm. Train speed seldom exceeded 20 miles per hour (32 km/h).[9] Two passenger train sets were required for this service. The first consisted of baggage #10, RPO #25, and one or two coaches.[10] A couple of bench seats at one end of baggage-RPO #11 provided smoking accommodation for the second train set.[11] Freight traffic in 1913 was 18% outbound lumber, 15% outbound pulpwood, 15% inbound coal, 11% outbound apples and canned corn, 11% manufactured goods, 10% feed & grain, 10% express, and 2% inbound petroleum products.[12] Locomotive #8 was the last locomotive built for the Maine 2 ft gauge railways.[13]

Bond interest went unpaid in 1926, and the town of Bridgton began a 15-year effort to preserve their railroad. The B&SR was reorganized as the Bridgton and Harrison Railway; but the extension to Harrison was dismantled after locomotive #8 tipped over when the 35# rails sagged in 1930.[14] Locomotive #8 was the heaviest locomotive on any 2 ft gauge railway in Maine. B&SR became a tourist attraction as the last 2 ft gauge railroad offering passenger service in the late 1930s.[15] Operation ceased in September 1941.[16] The rolling stock was preserved when the rails were converted to scrap metal as the United States prepared for World War II.[16] The rolling stock was moved to Massachusetts for another half-century of operation on the Edaville Railroad after the war. Subsequent to the restructuring of the Edaville Railroad, the historic Bridgton and Saco narrow gauge equipment returned to the state of Maine and are mostly located at the Maine Narrow Gauge Railroad Co. & Museum in Portland.

There are still signs of the B&SR evident in a few places if one searches carefully for them. Members of the Wiscasset, Waterville and Farmington Railway Museum have organized informal tours in the past several years to explore these remains. A new group, the Bridgton & Saco River Railroad Museum, was established in 2020 and have plans to build a new railyard in Bridgton for a museum and possible tourist railroad on the original right of way between Sandy Creek and Perleys Mills. More info can be found about this new revival of the Bridgton & Saco River on their website at Bridgtonrailroad.org.

Geography

edit
Bridgton and Saco River Railroad (Main Line)
Technical
Line length20.7 mi (33.3 km)
Track gauge2 ft (610 mm)
Route map

Legend
 
33,3
 Harrison, Maine
[17]
 
 
31,3
 North Bridgton
[17]
 
 
25.4
 Bridgton, Maine
[17]
 
21,8
 Sandy Creek
[17]
 
[17]
 
19,4
 South Bridgton[17]
 
18,1
 Kennetts[17]
 
16,8
 Ingalls Road
[17]
 
14,5
 Perleys Mills
[18]
 
12,1
 Tank House Siding
at Hancock Pond[18]
 
11,6
 West Sebago[18]
 
8,8
 Gravel Pit
[18]
 
[19]
 
4,3
 Mullens[18]
 
[19]
 
1,2
 Scribners
[18]
 
0,0
 Bridgton Junction
[18]

Milepost 0: Bridgton Junction - Interchange yard with the Portland and Ogdensburg (later Maine Central Railroad Mountain Division.) Agent's station shared with Maine Central Railroad. B&SR had 6 northbound spurs plus a turntable with a single-stall enginehouse. The freight house spur was dual gauge, and there was a second dual gauge spur for loading and unloading narrow gauge-equipment on standard-gauge cars. There was no runaround track; so southbound B&SR locomotives uncoupled their train on the main line, moved into the yard, threw a turnout, and let their train roll past them into the yard by gravity to avoid being trapped at the end of the spur.[20]

Milepost 0.8: Scribner's - southbound spur.[18]

Milepost 1: granite masonry arch over Hancock Brook.[19]

Milepost 1.2: Small's

Milepost 2.0: Rankin's Mill - small flag stop passenger shelter.[18]

Milepost 2.7: Mullen Siding - northbound spur.[18]

Milepost 3: Summit - highest point on the railroad.[18]

Milepost 4: Fill over the north end of Barker pond with granite masonry abutments for a short timber stringer span on the boundary between Hiram and the town of Sebago.[19]

Milepost 4.4: Twin Lake - small flag stop passenger shelter.[18]

Milepost 5.4: Gravel Pit - northbound spur.[18]

Milepost 7: The Notch - a rock cut.[18]

Milepost 7.2: West Sebago - southbound spur with small flag stop passenger shelter.[18]

Milepost 7.5: Water Tank Siding - passing siding adjacent to Hancock Pond. The main line ran between Hancock Pond and B&SR superintendent Joseph Bennett's lakeside cottage a short distance south of the covered water tank.[18]

Milepost 9.0: Perley's Mills - southbound spur with small flag stop passenger shelter.[18]

Milepost 10.5: Ingall's Road - southbound spur with small flag stop passenger shelter.[17]

Milepost 11.3: Kennett's - southbound spur.[17]

Milepost 12.1: South Bridgton - southbound spur with small flag stop passenger shelter.[17]

Milepost 13: high fill with granite masonry abutments for a short timber stringer span over Willett Brook.

Milepost 13.5: Sandy Creek - agent's station with passing siding serving a sawmill.[17]

Milepost 15.8: Bridgton - had the largest population of any village served by the Maine 2 ft (610 mm) gauge railroads. The yard was on the stub of a wye with branches to Harrison and Bridgton Junction. There were 2 storage sidings and 4 spurs serving the agent's station, a separate freight house, a team track, an oil distributor, a grain store, the B&SR shop, and a turntable with a 4-stall enginehouse.[21]

Milepost 15.9: Farmers Market - two northbound spurs (one was a coal trestle.)[18]

Milepost 16.4: Forest Mills—passing siding with a northbound coal trestle spur.[22]

Milepost 19.5: North Bridgton - agent's station with passing siding serving a separate freight house.[17]

Milepost 20.7: Harrison - agent's station with a passing siding and several southbound spurs serving a freight house, a cannery, a grain store, a 2-track car shed, and a turntable with a single-stall enginehouse.[9]

Master Mechanic Caswell

edit

Bridgton machine shop foreman Millard M. "Mel" Caswell was born in 1850.[23] He took an early interest in mechanical affairs of the proposed railroad and served as master mechanic for the B&SR until he retired in 1926.[24] He remained interested in the railroad and frequently attended the railfan excursions of the 1930s.[25] His son, Wilfred H. Caswell, was born in 1876 and shared his father's mechanical aptitude. Wilfred Caswell was the engineer assigned to the construction train for the Harrison extension in 1898. Wilfred was the Portland Company mechanical engineer who supervised construction of the first Maine narrow gauge Forney locomotive with a pilot truck (B&SR locomotive number 5) in 1906. Wilfred then served as a consulting engineer for Baldwin Locomotive Works during construction of B&SR locomotive number 6 and an identical locomotive for the Sandy River Railroad.[26] In May 1909 Wilfred became master mechanic of the Sandy River and Rangeley Lakes Railroad (SR&RL).[27] Wilfred's early recognition of the technical value of photography produced excellent photographic documentation of SR&RL operations through the period of Maine Central Railroad ownership.[28] When SR&RL profits declined in 1922, Wilfred and his wife Blanche, who had been the SR&RL book-keeper, moved to Dedham, Massachusetts, where Wilfred worked for the New York, New Haven and Hartford Railroad.[29]

Locomotives

edit
Number[30] Builder[30] Type[30] Date[31] Works number[30] Notes
1 Hinkley Locomotive Works 0-4-4T Forney locomotive 10/1882 1563 Scrapped 1913[31]
2 Hinkley Locomotive Works 0-4-4T Forney locomotive 10/1882 1564 Sold to the Wiscasset, Waterville and Farmington Railway in 1907[31]
3 Portland Company 0-4-4T Forney locomotive 4/1892 624 Sold to the Kennebec Central Railroad in 1922[31]
Bo-Peep[32] Hinkley Locomotive Works 0-4-4T Forney locomotive 1877 1261 Temporarily leased from the Phillips and Rangeley Railroad in 1893 while fire-damaged B&SR engines 1 and 3 were repaired.[33][34]
4 H. K. Porter, Inc 0-4-4T Forney locomotive 8/1901 2360 Retired 1927[35]
5 Portland Company 2-4-4T Forney locomotive 11/1906 628 Retired 1927[35]
6 Baldwin Locomotive Works 2-4-4T Forney locomotive 9/1907 31827 Retired 1935[35]
7 Baldwin Locomotive Works 2-4-4T Forney locomotive 12/1913 40864 Sold to Ellis D. Atwood for use at the Edaville Railroad in 1941.
Operable. It operated its first trips during Steam Fest on May 19, 2018, at the Maine Narrow Gauge Railroad Co. & Museum. Currently at the WW&F.
8 Baldwin Locomotive Works 2-4-4T Forney locomotive 3/1924 57659 Sold to Ellis D. Atwood for use at the Edaville Railroad in 1941.
Stored. awaiting cosmetic restoration at the Maine Narrow Gauge Railroad Co. & Museum. 8 is the largest Maine 2 footer locomotive in existence, heavier than even the 2-6-2's on the SR&RL railroad. Currently stored at the WW&F.
9 Plymouth Locomotive Works 10 ton diesel 1930s bought from the Silver Lake Railroad in New Hampshire 2022, will be rebuilt with a new prime mover and regauged to 2ft gauge

Rolling stock

edit
Number Builder Type Date Length Capacity Notes
10 Laconia Car Company baggage car 1882 41 feet (12.50 m) no seats renumbered #31[36]
11 Jackson & Sharpe baggage-RPO 1900 41 feet 9 inches (12.73 m) 6 passengers renumbered #30[36] 3-door Baggage/RPO later converted by Edaville to Baggage/Coach, and later again to Coach. Located at Boothbay Railway Village, Boothbay ME
15 Laconia Car Company coach 1882 41 feet (12.50 m) 28 passengers
16 Laconia Car Company coach 1882 41 feet (12.50 m) 28 passengers
17 Laconia Car Company coach 1904 42 feet 9 inches (13.03 m) 28 passengers named "Elthea" on Edaville Railroad
18 Jackson & Sharpe coach 1894 39 feet 9 inches (12.12 m) 28 passengers purchased from Wiscasset, Waterville and Farmington Railway in 1911.[36] leased to WW&F Railway Museum, restored as Wiscasset and Quebec #3
25 Portland Terminal Company[37] RPO-smoking car 1913 42 feet 9 inches (13.03 m) 30 passengers

badly damaged in a collision with locomotive #7 in the Bridgton yard about 1927. The larger smoking compartment was rebuilt to carry express with a single baggage door on only one side of the car; and the smaller RPO compartment was rebuilt with a few seats to carry passengers. The car was sold for use as a restaurant in 1935. The appearance of locomotive #7 was permanently changed by replacement of a smaller number plate on the front of the boiler.[38]

101 Laconia Car Company caboose 1882 26 feet (7.92 m) 5 passengers
2-7 Portland Terminal Company[36][39] flat cars 1916 34 feet (10.36 m) 15 short tons (13 long tons; 14 t)[40] the largest flat cars on any 2 ft (610 mm) gauge railway in Maine.
8-10 Portland Terminal Company[36][39] flat cars 1915 34 feet (10.36 m) 15 short tons (13 long tons; 14 t)[40] the largest flat cars on any 2 ft (610 mm) gauge railway in Maine.
11-13 Portland Terminal Company[36][39] flat cars 1913 34 feet (10.36 m) 15 tons[40] the largest flat cars on any 2 ft (610 mm) gauge railway in Maine.
14-21 Portland Company flat cars 1903[41] 30 feet (9.14 m) 15 tons[40] Flat car #21 was fitted with a 3,000-US-gallon (2,500 imp gal; 11,000 L) oil tank for the Standard Oil Company of New York in 1920.[42] The tank was later transferred to flat car #14 when #21 was scrapped.[43][44]
22 Portland Company flat cars 1899 28 feet (8.53 m) 10 tons[45] fitted with a 2,500-US-gallon (2,100 imp gal; 9,500 L) oil tank for the Standard Oil Company in 1901.[46] Cars #22 and #21/14 were the only 2 ft (610 mm) gauge tank cars in Maine.[47]
23 Portland Company flat cars 1899 28 feet (8.53 m) 10 tons[45] parts used by Edaville to construct open car #202
24-27 Portland Company flat cars 1899 28 feet (8.53 m) 10 tons[45]
28-33 Portland Company flat cars 1891 28 feet (8.53 m) 10 tons[48]
34 B&SR flat car 1889 26 feet (7.92 m) 10 tons[48] Preserved at WW&F
35-44 Laconia Car Company flat cars 1882 26 feet (7.92 m) 10 tons[48] Flat cars #35, 38, and 41-42 were rebuilt by B&SR to a length of 28 feet (8.5 m) when they required repairs.[48] Flat car #40 was rebuilt as a flanger.[49]
45-49 Laconia Car Company box cars 1882 26 feet (7.92 m) 10 tons[48]
50-51 B&SR box cars 1889 26 feet (7.92 m) 10 tons[48]
52-54 Portland Company box cars 1895 28 feet (8.53 m) 10 tons[48] car 54 converted by Edaville to excursion car, leased by SR&RL, Phillips, ME
55-58 Portland Company box cars 1898 28 feet (8.53 m) 10 tons[48] Box cars #56-58 had two small hinged doors on either side which could be opened as windows when transporting livestock.[50]
59-62 Portland Company box cars 1900 30 feet (9.14 m) 15 tons[48] the first 30-foot (9.1 m) freight cars built for any 2 ft (610 mm) gauge railroad in Maine.
63-68 Laconia Car Company box cars 1905 30 feet (9.14 m) 15 tons[48]
69-70 B&SR box cars 1906 30 feet (9.14 m) 15 tons[48]
71-73 Portland Terminal Company[36][51] box cars 1913 34 feet (10.36 m) 15 tons[48] the largest box cars on any 2 ft (610 mm) gauge railway in Maine.[52]

Footnotes

edit
  1. ^ Moody (1959), p. 124-129.
  2. ^ Railroad Commissioners' Report State of Maine 1895 p. 35
  3. ^ Moody (1959), p. 132.
  4. ^ Railroad Commissioners' Report State of Maine 1906 p.56
  5. ^ Moody (1959), p. 130 & 133.
  6. ^ Railroad Commissioners' Report State of Maine 1907 p.59
  7. ^ Railroad Commissioners' Report State of Maine 1909 p. 73
  8. ^ Railroad Commissioners' Report State of Maine 1910 p. 83
  9. ^ a b Mead (1968), p. 28-29.
  10. ^ Jones (1993), p. 82.
  11. ^ Jones (1993), p. 249.
  12. ^ Railroad Commissioners' Report State of Maine 1913 p. 211
  13. ^ Moody (1959), p. 134.
  14. ^ Moody (1959), p. 136.
  15. ^ Moody (1959), p. 139-140.
  16. ^ a b Moody (1959), p. 143.
  17. ^ a b c d e f g h i j k l m Jones (1993), p. 114.
  18. ^ a b c d e f g h i j k l m n o p q r Jones (1993), p. 115.
  19. ^ a b c d Meade, Edgar T., Jr. The Bridgton Narrow Gauge (Volume II)(Bridgton & Harrison Railway Co.) Railhead Publication 1987 p.4
  20. ^ Mead (1968), p. 22-23.
  21. ^ Mead (1968), p. 36-37.
  22. ^ Jones (1993), p. 114-115.
  23. ^ United States Census 1880
  24. ^ Jones (1993), p. 26-96.
  25. ^ Jones (1993), p. 144.
  26. ^ Jones (1993), p. 50-73.
  27. ^ Jones (1980), p. 26.
  28. ^ Jones (1980), p. 89.
  29. ^ Jones (1980), p. 188.
  30. ^ a b c d Mead (1968), p. 54.
  31. ^ a b c d Jones (1993), p. 221.
  32. ^ Crittenden (1966), p. 69.
  33. ^ Crittenden (1966), p. 77.
  34. ^ Jones (1993), p. 45.
  35. ^ a b c Mead (1968), p. 55.
  36. ^ a b c d e f g Mead (1968), p. 56.
  37. ^ Barney (1987), p. 93.
  38. ^ Mead (1968), p. 37-38.
  39. ^ a b c Barney (1987), p. 12-13.
  40. ^ a b c d Jones (1993), p. 223.
  41. ^ Barney (1987), p. 13.
  42. ^ Jones, Robert C. Two Feet to the Lakes, The Bridgton & Saco River Railroad Pacific Fast Mail 1993 p.90 -- Jones incorrectly associates this tank with car number 22 (fitted with a tank 19 years earlier) and states capacity as 5,000 US gal (4,200 imp gal; 19,000 L) (inconsistent with tank dimensions from scale drawings on Jones page 234 and Barney page 91)
  43. ^ Barney (1987), p. 62 & 90.
  44. ^ Jones, Robert C. Two Feet to the Lakes, The Bridgton & Saco River Railroad Pacific Fast Mail 1993 pp.223 & 235
  45. ^ a b c Jones, Robert C. Two Feet to the Lakes, The Bridgton & Saco River Railroad Pacific Fast Mail 1993 pp.222-223
  46. ^ Jones, Robert C. Two Feet to the Lakes, The Bridgton & Saco River Railroad Pacific Fast Mail 1993 p.63 -- Jones incorrectly associates this tank with car number 14 (built 2 years after this tank was fitted) and states capacity as 3,000 US gal (2,500 imp gal; 11,000 L) (inconsistent with tank dimensions from scale drawings on Jones page 235 and Barney page 91)
  47. ^ Moody (1959), p. 28 & 132.
  48. ^ a b c d e f g h i j k l Jones (1993), p. 222.
  49. ^ Mead (1968), p. 58.
  50. ^ Barney (1987), p. 53.
  51. ^ Barney (1987), p. 14 & 90.
  52. ^ Barney (1987), p. 60.

References

edit
  • Barney, Peter S. (1987). The Bridgton and Saco River: A Technical and Pictorial Review. A&M Publishing. ASIN B0006ENSOA. OCLC 17261223.
  • Crittenden, H. Temple (1966). The Maine Scenic Route: A History of the Sandy River & Rangeley Lakes Railroad (1st ed.). Parsons, WV.: McClain Print. Co. ISBN 978-0-8701-2060-2. OCLC 950420.
  • Johnson, Ron (n.d.). Maine Central R.R. Mountain Division. 470 Railroad Club.{{cite book}}: CS1 maint: year (link)
  • Jones, Robert C. (1980). Two Feet Between the Rails (Volume II - The Mature Years). Sundance Books.
  • Jones, Robert C. (1993). Two Feet to the Lakes, The Bridgton & Saco River Railroad. Edmonds, WA.: Pacific Fast Mail. ISBN 978-0-9157-1326-4. OCLC 29191763.
  • MacDonald, Robert L. (2003). Maine Narrow Gauge Railroads. Arcadia Publishing. ISBN 0-7385-1179-X.
  • McLin, William Hellen (1941). The Twenty-Four-Inch Gauge Railroad at Bridgton, Maine. The Bridgton News.
  • Mead, Edgar Thorn Jr. (1968). 'Busted and Still Running' ; The Famous Two-Foot Gauge Railroad of Bridgton, Maine. Brattleboro, VT.: The Stephen Greene Press. ASIN B000GFD5XS. OCLC 72315.
  • Meade Edgar T. Jr. (1987). The Bridgton Narrow Gauge (Volume II)(Bridgton & Harrison Railway Co.). Railhead Publications.
  • Moody, Linwood W. (1959). The Maine Two-Footers: The Story of the Two-Foot Gauge Railroads of Maine (1st ed.). Berkeley, CA.: Howell-North. ASIN B0007DVPH2. OCLC 637543767.
  • Ward, Ernest E. (1966). My First Sixty Years in Harrison, Maine. Cardinal Printing Co.
  • Railroad Commissioners' Report. State of Maine. 1895, 1896, 1897, 1898, 1899, 1900, 1901, 1902, 1903, 1904, 1905, 1906, 1907, 1908, 1909, 1910, 1911, 1912, 1913 and 1914
edit
Retrieved from "https://en.wikipedia.org/w/index.php?title=Bridgton_and_Saco_River_Railroad&oldid=1260919780"