Sophisticated Test and Instrumentation Centre

The chaotic dynamics of directly modulated semiconductor lasers with delayed optoelectronic feedback is studied numerically. The effects of positive and negative delayed optoelectronic feedback in producing chaotic outputs from such lasers with nonlinear gain reduction in its optimum value range is investigated using bifurcation diagrams. The results are confirmed by calculating the Lyapunov exponents. A negative delayed optoelectronic feedback configuration is found to be more effective in inducing chaotic dynamics to such systems with nonlinear gain reduction factor in the practical value range.

Dynamics of Nd:YAG laser with intracavity KTP crystal operating in two parallel polarized modes is investigated analytically and numerically. System equilibrium points were found out and the stability of each of them was checked using Routh-Hurwitz criteria and also by calculating the eigen values of the Jacobian. It is found that the system possesses three equilibrium points for (I j , G j ), where j = 1, 2. One of these equilibrium points undergoes Hopf bifurcation in output dynamics as the control parameter is increased. The other two remain unstable throughout the entire region of the parameter space. Our numerical analysis of the Hopf bifurcation phenomena is found to be in good agreement with the analytical results. Nature of energy transfer between the two modes is also studied numerically.

Isochronal synchronisation between the elements of an array of three mutually coupled directly modulated semiconductor lasers is utilized for the purpose of simultaneous bidirectional secure communication. Chaotic synchronisation is achieved by adding the coupling signal to the self feedback signal provided to each element of the array. A symmetric coupling is effective in inducing synchronisation between the elements of the array. This coupling scheme provides a direct link between every pair of elements thus making the method suitable for simultaneous bidirectional communication between them. Both analog and digital messages are successfully encrypted and decrypted simultaneously by each element of the array.

Isochronal synchronisation between the elements of an array of three mutually coupled directly modulated semiconductor lasers is utilized for the purpose of simultaneous bidirectional secure communication. Chaotic synchronisation is achieved by adding the coupling signal to the self feedback signal provided to each element of the array. A symmetric coupling is effective in inducing synchronisation between the elements of the array. This coupling scheme provides a direct link between every pair of elements thus making the method suitable for simultaneous bidirectional communication between them. Both analog and digital messages are successfully encrypted and decrypted simultaneously by each element of the array.

Isochronal synchronisation between the elements of an array of three mutually coupled directly modulated semiconductor lasers is utilized for the purpose of simultaneous bidirectional secure communication. Chaotic synchronisation is achieved by adding the coupling signal to the self feedback signal provided to each element of the array. A symmetric coupling is effective in inducing synchronisation between the elements of the array. This coupling scheme provides a direct link between every pair of elements thus making the method suitable for simultaneous bidirectional communication between them. Both analog and digital messages are successfully encrypted and decrypted simultaneously by each element of the array.

Chaotic synchronization of two directly modulated semiconductor lasers with negative delayed optoelectronic feedback is investigated and this scheme is found to be useful for efficient bidirectional communication between the lasers. A symmetric bidirectional coupling is identified as a suitable method for isochronal synchronization of such lasers. The optimum values of coupling and feedback strength that can provide maximum quality of synchronization are identified. This method is successfully employed for encoding/decoding both analog and digital messages. The importance of a symmetric coupling is demonstrated by studying the variation of decoding efficiency with respect to asymmetric coupling.

Results of a nwnericaI study of synchronisation of two directly modulated semiconductor lasers, using bi-directional coupling, are presented. The effect of stepwise increase in the coupling strength (C) on the synchronisation of the chaotic outputs of two such lasers is studied, with the help of parameter space plots, synchronisation error plots, phase diagrams and time series outputs. Nwnerlcal results indicate that as C increases, the system achieves synchronisation as well as stability together with an increase in the output power. The stability of the synchronised states is checked by applying a perturbation to the system after it becomes synchronised and then noting the time it takes to regain synchronisation. For lower values of C the system does not regain synchronisation. But, with higher values synchronisation is regained within a very short time.

Machine tool chatter is an unfavorable phenomenon during metal cutting, which results in heavy vibration of cutting tool. With increase in depth of cut, the cutting regime changes from chatter-free cutting to one with chatter. In this paper, we propose the use of permutation entropy (PE), a conceptually simple and computationally fast measurement to detect the onset of chatter from the time series using sound signal recorded with a unidirectional microphone. PE can efficiently distinguish the regular and complex nature of any signal and extract information about the dynamics of the process by indicating sudden change in its value. Under situations where the data sets are huge and there is no time for preprocessing and fine-tuning, PE can effectively detect dynamical changes of the system. This makes PE an ideal choice for online detection of chatter, which is not possible with other conventional nonlinear methods. In the present study, the variation of PE under two cutting conditions is analyzed. Abrupt variation in the value of PE with increase in depth of cut indicates the onset of chatter vibrations. The results are verified using frequency spectra of the signals and the nonlinear measure, normalized coarse-grained information rate (NCIR).

In this Letter we numerically investigate the dynamics of a system of two coupled chaotic multimode Nd:YAG lasers with two mode and three mode outputs. Unidirectional and bidirectional coupling schemes are adopted; intensity time series plots, phase space plots and synchronization plots are used for studying the dynamics. Quality of synchronization is measured using correlation index plots. It is found that for laser with two mode output bidirectional direct coupling scheme is found to be effective in achieving complete synchronization, control of chaos and amplification in output intensity. For laser with three mode output, bidirectional difference coupling scheme gives much better chaotic synchronization as compared to unidirectional difference coupling but at the cost of higher coupling strength. We also conclude that the coupling scheme and system properties play an important role in determining the type of synchronization exhibited by the system.

This paper is concerned with the design of a Modified Sliding Mode Controller for the position control of DC Motor. The DC motor can be modeled as a linear time invariant single input single output (SISO) system. In this paper synthesis and analysis of position control of a DC motor using chattering free sliding mode controller and conventional PID controllers are carried out and their performance is evaluated. The performance of modified sliding mode controller is superior to conventional PID controllers even in the presence of disturbances.

The Iris recognition technique is currently the most efficient biometric identification system and is a common system on the practical front. Though most of the commercial systems use the patented Daugman's algorithm, which mainly uses wavelet-based features, research is still active in identifying novel features that can provide personal identification. Here the first novel proposal of using ordinal pattern measure based on nonlinear time series analysis is put forth to characterize the unique pattern of the iris of individuals and thereby perform personal identification. Dispersion Entropy is a nonlinear timeseries analysis method highly efficient in the characterization of the complexity of any data series with proven effectiveness in the characterization of model system dynamics as well as real-world data series. The results show that dispersion entropy can be used to identify iris images of specific individuals. The efficiency of this method is evaluated by computing correlation and RMSE between dispersion entropy values of normalized iris image rubber sheet data. The experimental results on the popular IRIS database-CASIA v1-demonstrate that the proposed method can effectively perform differential identification of iris images from different individuals. The results specifically indicate that the density of information along the angular direction of iris images which falls along the rows of rubber sheet data. This can be efficiently utilized with the method or ordinal pattern characterization and proves to be having promising potential for being incorporated into biometrics personal identification systems.

Hypersonic wind tunnel is a ground-based facility used to study the aerodynamic properties of space vehicles during re-entry. This paper aims at designing an H-infinity controller with krill herd optimization algorithm to regulate pressure inside the settling chamber of a hypersonic wind tunnel. The krill herd algorithm is a novel stochastic algorithm for improving the performance characteristics by optimizing the H-infinity controller parameters. The proposed algorithm minimizes the H-infinity norms by tuning the controller weighing function parameters. The dynamic characteristics of the settling chamber pressure with H-infinity and H-infinity control based on krill herd algorithm is studied by numerical simulations. The proposed algorithm is highly efficient and robust in controlling the settling chamber pressure in terms of performance parameters.