3d printing filament storage

I wanted to store my filaments in individual containers where I could see them outside of the box/bag. But I would keep the box around because it had all the information, I may need to select the right filament for the print or to reorder the same exact color filament.Some information I wanted to keep included filament type, brand, color, SKU, HEX colors, print temperatures, print profiles, etc. I designed an all-in-one solution to beautifully display my filament, including the filament…

Edit:Just an fyi, I've noticed that there is a slight difference inside the cabinet for temp and humidity. I have 4 hydrometers, basically one in

3D printing organization and filament storage.

Revamp 3D Printing: Defeat moisture nightmares! Unleash peak print quality with unique filament storage. Embrace the revolution now!

3D Filament Storage Box (in an IKEA SAMLA Box): 3D printing is amazing - it gives you so many possibilities to play with. And if you're like me, you've got multiple rolls of filament to try out different colors and materials. However, 3D filament is hygroscopic - meaning it will absorb moisture…

This is a filament spool holder specifically designed for E-Sun 3D filament!2x Arms2x HooksPrint the four pieces horizontally and snap the two arms in

Learn how to store 3d printing filament the right way and also explore tips for making filament storage simpler and more effective.

As a lover of 3D printing, I of course, have a ton of filament for use with my Formbot T-Rex 2+. For reasons unknown to me, my office at home had a closet with a desk and power built into it. So way back when we got our MakerBot in 2013 it was quickly decided that it would be a great place for the printer. I’ve done a number of improvements over the years like sealing up the doors to make the whole thing a heated chamber (this works especially well with the Formbot’s 800W heated bed) and…

Go3D Lab on Instagram: "“Keep your filament organized and protected! Our 3D printed holder with silicone gel box is the perfect storage solution for your 3D printing supplies. Say goodbye to tangled messes and hello to a tidy workspace! #go3dlab #go3dlabservices #go3dlabcreations #3dprinted #organizer #technology #storage #reels #viral #marketing #3DPrinting #FilamentStorage #OrganizationStation”"

Remix info:The original design did not fit in my stacked lack table setup and the design did not fit on my Bambulab P1P printbed, so i had to redesign the whole thing.I made it a total 38mm less wide en 4mm less high (i wanted it to be square).Because of this width difference the rails had to be lowered for there to be enough clearance.this also had a great effect on the position of the pvc pipes and the force put on the faceplate when pulling on the drawers.front and backplates are also…