978-1-58503-787-2-1

AutoCAD 2014 Tutorial - First Level: 2D Fundamentals ® Randy H. Shih Multimedia Disc SDC P U B L I C AT I O N S Schroff Development Corporation Better Textbooks. Lower Prices. www.SDCpublications.com Video presentations of selected tutorials and exercises Visit the following websites to learn more about this book: AutoCAD® 2014 Tutorial: 2D Fundamentals Chapter 1 AutoCAD Fundamentals ♦ Create and Save AutoCAD drawing files ♦ Use the AutoCAD visual reference commands ♦ Draw, using the LINE and CIRCLE commands ♦ Use the ERASE command ♦ Define Positions using the Basic Entry methods ♦ Use the AutoCAD Pan Realtime option 1-1 1-2 AutoCAD® 2014 Tutorial: 2D Fundamentals AutoCAD Certified User Examination Objectives Coverage This table shows the pages on which the objectives of the Certified User Examination are covered in Chapter 1. Section 1: Controlling the Display in Drawings Precision...........................................................................1-6 Zoom Extent.....................................................................1-7 Drawing LIMITS ............................................................1-6 Status Bar .........................................................................1-10 GRID Display ..................................................................1-10, 1-11 PAN Realtime ..................................................................1-20 Certified User Reference Guide Section 2: Creating Basic Drawings Format ..............................................................................1-5 Units Setup ......................................................................1-5 LINE Command ...............................................................1-8 Coordinates ......................................................................1-8 Interactive Input Method..................................................1-10 SNAP Option ...................................................................1-12 World Space .....................................................................1-15 User Coordinate System ..................................................1-15 World Coordinate System ................................................1-15 UCS Icon Display ............................................................1-16 TTR, Circle ......................................................................1-23 Relative Coordinate .........................................................1-17 Coordinate Systems .........................................................1-17 Cartesian coordinate system ............................................1-17 Absolute Coordinates .......................................................1-17, 1-18 Positions, Defining...........................................................1-18 LINE, Close Option .........................................................1-19 CIRCLE Command ..........................................................1-23 TTT, Circle ......................................................................1-23 ARC Command ………………………………………... 1-33 Section 3: Manipulating Objects ERASE Command ..........................................................1-13 Selection Window ............................................................1-14 AutoCAD Fundamentals 1-3 Introduction Learning to use a CAD system is similar to learning a new language. It is necessary to begin with the basic alphabet and learn how to use it correctly and effectively through practice. This will require learning some new concepts and skills as well as learning a different vocabulary. Today, the majority of the Mechanical CAD systems are capable of creating three-dimensional solid models. Nonetheless, all CAD systems create designs using basic geometric entities and many of the constructions used in technical designs are based upon two-dimensional planar geometry. The method and number of operations that are required to accomplish the basic planar constructions are different from one system to another. In order to become effective and efficient in using a CAD system, we must learn to create geometric entities quickly and accurately. In learning to use a CAD system, lines and circles are the first two, and perhaps the most important two, geometric entities that one should master the skills of creating and modifying. Straight lines and circles are used in almost all technical designs. In examining the different types of planar geometric entities, the importance of lines and circles becomes obvious. Triangles and polygons are planar figures bounded by straight lines. Ellipses and splines can be constructed by connecting arcs with different radii. As one gains some experience in creating lines and circles, similar procedures can be applied to create other geometric entities. In this chapter, the different ways of creating lines and circles in AutoCAD® 2014 are examined. Starting Up AutoCAD® 2014 1. Select the AutoCAD 2014 option on the Program menu or select the AutoCAD 2014 icon on the Desktop.  Once the program is loaded into memory, the AutoCAD® 2014 drawing screen will appear on the screen. 1-4 AutoCAD® 2014 Tutorial: 2D Fundamentals  Note that AutoCAD automatically assigns generic names, Drawing X, as new drawings are created. In our example, AutoCAD opened the graphics window using the default system units and assigned the drawing name Drawing1. 2. If necessary, click on the down-arrow in the Quick Access bar and select Show Menu to display the AutoCAD Menu Bar. The Menu Bar provides access to all AutoCAD commands. AutoCAD Menu Bar AutoCAD Fundamentals 1-5 Drawing Units Setup  Every object we construct in a CAD system is measured in units. We should determine the system of units within the CAD system before creating the first geometric entities. 1. In the Menu Bar select: [Format]  [Units] • The AutoCAD Menu Bar contains multiple pull-down menus, where all of the AutoCAD commands can be accessed. Note that many of the menu items listed in the pull-down menus can also be accessed through the Quick Access toolbar and/or Ribbon panels. 2. Click on the Length Type option to display the different types of length units available. Confirm the Length Type is set to Decimal. 3. On your own, examine the other settings that are available. 4. In the Drawing Units dialog box, set the Length Type to Decimal. This will set the measurement to the default English units, inches. 1-6 AutoCAD® 2014 Tutorial: 2D Fundamentals 5. Set the Precision to two digits after the decimal point as shown in the above figure. 6. Pick OK to exit the Drawing Units dialog box. Drawing Area Setup  Next, we will set up the Drawing Limits by entering a command in the command prompt area. Setting the Drawing Limits controls the extents of the display of the grid. It also serves as a visual reference that marks the working area. It can also be used to prevent construction outside the grid limits and as a plot option that defines an area to be plotted/printed. Note that this setting does not limit the region for geometry construction. 1. In the Menu Bar select: [Format]  [Drawing Limits] 2. In the command prompt area, the message “Reset Model Space Limits: Specify lower left corner or [On/Off] <0.00,0.00>:” is displayed. Press the ENTER key once to accept the default coordinates <0.00,0.00>. 3. In the command prompt area, the message “Specify upper right corner <12.00,9.00>:” is displayed. Press the ENTER key again to accept the default coordinates <12.00,9.00>. AutoCAD Fundamentals 1-7 4. On your own, move the graphics cursor near the upper-right comer inside the drawing area and note that the drawing area is unchanged. (The Drawing Limits command is used to set the drawing area, but the display will not be adjusted until a display command is used.) 5. Inside the Menu Bar area select: [View]  [Zoom]  [All]  The Zoom All command will adjust the display so that all objects in the drawing are displayed to be as large as possible. If no objects are constructed, the Drawing Limits are used to adjust the current viewport. 6. Move the graphics cursor near the upper-right comer inside the drawing area and note that the display area is updated. 7. Hit the function key [F7] once to turn off the display of the Grid lines. • Note that function key [F7] is a quick key, which can be used to quickly toggle on/off the grid display. Also, note the command prompt area can be positioned to dock below the drawing area or float inside the drawing area as shown. AutoCAD® 2014 Tutorial: 2D Fundamentals 1-8 Drawing Lines with the LINE Command 1. Move the graphics cursor to the first icon in the Draw panel. This icon is the Line icon. Note that a brief description of the Line command appears next to the cursor. 2. Select the icon by clicking once with the leftmouse-button, which will activate the Line command. 3. In the command prompt area, near the bottom of the AutoCAD drawing screen, the message “_line Specify first point:” is displayed. AutoCAD expects us to identify the starting location of a straight line. Move the graphics cursor inside the graphics window and watch the display of the coordinates of the graphics cursor at the bottom of the AutoCAD drawing screen. The three numbers represent the location of the cursor in the X, Y, and Z directions. We can treat the graphics window as if it was a piece of paper and we are using the graphics cursor as if it were a pencil with which to draw. Coordinates of the graphics cursor 5 3 2 1 4  We will create a freehand sketch of a fivepoint star using the Line command. Do not be overly concerned with the actual size or accuracy of your freehand sketch. This exercise is to give you a feel for the AutoCAD® 2014 user interface. AutoCAD Fundamentals 1-9 4. We will start at a location about one-third from the bottom of the graphics window. Left-click once to position the starting point of our first line. This will be point 1 of our sketch. Next move the cursor upward and toward the right side of point 1. Notice the rubber-band line that follows the graphics cursor in the graphics window. Left-click again (point 2) and we have created the first line of our sketch. 5. Move the cursor to the left of point 2 and create a horizontal line about the same length as the first line on the screen. 5 3 6. Repeat the above steps and complete the freehand sketch by adding three more lines (from point 3 to point 4, point 4 to point 5, and then connect to point 5 back to point 1). 2 1 4 7. Notice that the Line command remains activated even after we connected the last segment of the line to the starting point (point 1) of our sketch. Inside the graphics window, click once with the right-mouse-button and a popup menu appears on the screen. 8. Select Enter with the left-mouse-button to end the Line command. (This is equivalent to hitting the [ENTER] key on the keyboard.) 9. Move the cursor near point 2 and point 3, and estimate the length of the horizontal line by watching the displayed coordinates for each point. 1-10 AutoCAD® 2014 Tutorial: 2D Fundamentals Visual Reference The method we just used to create the freehand sketch is known as the interactive method, where we use the cursor to specify locations on the screen. This method is perhaps the fastest way to specify locations on the screen. However, it is rather difficult to try to create a line of a specific length by watching the displayed coordinates. It would be helpful to know what one inch or one meter looks like on the screen while we are creating entities. AutoCAD® 2014 provides us with many tools to aid the construction of our designs. For example, the GRID and SNAP MODE options can be used to get a visual reference as to the size of objects and learn to restrict the movement of the cursor to a set increment on the screen. The GRID and SNAP MODE options can be turned ON or OFF through the Status Bar. The Status Bar area is located at the bottom left of the AutoCAD drawing screen, next to the cursor coordinates. Option Buttons The second button in the Status Bar is the SNAP MODE option and the third button is the GRID DISPLAY option. Note that the buttons in the Status Bar area serve two functions: (1) the status of the specific option, and (2) as toggle switches that can be used to turn these special options ON and OFF. When the corresponding button is highlighted, the specific option is turned ON. Using the buttons is a quick and easy way to make changes to these drawing aid options. The buttons in the Status Bar can also be switched on and off in the middle of another command. AutoCAD Fundamentals 1-11 GRID ON 1. Left-click the GRID button in the Status Bar to turn ON the GRID DISPLAY option. (Notice in the command prompt area, the message “<Grid on>” is also displayed.) 2. Move the cursor inside the graphics window, and estimate the distance in between the grid lines by watching the coordinates displayed at the bottom of the screen.  The GRID option creates a pattern of lines that extends over an area on the screen. Using the grid is similar to placing a sheet of grid paper under a drawing. The grid helps you align objects and visualize the distance between them. The grid is not displayed in the plotted drawing. The default grid spacing, which means the distance in between two lines on the screen, is 0.5 inches. We can see that the sketched horizontal line in the sketch is about 4.5 inches long. 1-12 AutoCAD® 2014 Tutorial: 2D Fundamentals SNAP MODE ON 1. Left-click the SNAP MODE button in the Status Bar to turn ON the SNAP option. 2. Move the cursor inside the graphics window, and move the cursor diagonally on the screen. Observe the movement of the cursor and watch the coordinates display at the bottom of the screen.  The SNAP option controls an invisible rectangular grid that restricts cursor movement to specified intervals. When SNAP mode is on, the screen cursor and all input coordinates are snapped to the nearest point on the grid. The default snap interval is 0.5 inches, and aligned to the grid points on the screen. 3. Click on the Line icon in the Draw toolbar. In the command prompt area, the message “_line Specify first point:” is displayed. 4. On your own, create another sketch of the five-point star with the GRID and SNAP options switched ON. 5. Use the right-mouse-button and select Enter in the popup menu to end the Line command if you have not done so. AutoCAD Fundamentals 1-13 Using the ERASE Command  One of the advantages of using a CAD system is the ability to remove entities without leaving any marks. We will erase two of the lines using the Erase command. 1. Pick Erase in the Modify toolbar. (The icon is a picture of an eraser at the end of a pencil.) The message “Select objects” is displayed in the command prompt area and AutoCAD awaits us to select the objects to erase. 2. Left-click the SNAP MODE button on the Status Bar to turn OFF the SNAP MODE option so that we can more easily move the cursor on top of objects. We can toggle the Status Bar options ON or OFF in the middle of another command. 3. Select any two lines on the screen; the selected lines are displayed as dashed lines as shown in the figure below.  To deselect an object from the selection set, hold down the [SHIFT] key and select the object again. 4. Right-mouse-click once to accept the selections. The selected two lines are erased. 1-14 AutoCAD® 2014 Tutorial: 2D Fundamentals Repeat the Last Command 1. Inside the graphics window, click once with the right-mousebutton to bring up the popup option menu. 2. Pick Repeat Erase, with the left-mouse-button, in the popup menu to repeat the last command. Notice the other options available in the popup menu.  AutoCAD® 2014 offers many options to accomplish the same task. Throughout this text, we will emphasize the use of the AutoCAD Heads-up DesignTM interface, which means we focus on the screen, not on the keyboard. 3. Move the cursor to a location that is above and toward the left side of the entities on the screen. Left-mouse-click once to start a corner of a rubber-band window. First corner Second corner 4. Move the cursor toward the right and below the entities, and then left-mouse-click to enclose all the entities inside the selection window. Notice all entities that are inside the window are selected. 5. Inside the graphics window, right-mouse-click once to proceed with erasing the selected entities.  On your own, create a free-hand sketch of your choice using the Line command. Experiment with using the different commands we have discussed so far. Reset the status buttons so that only the GRID DISPLAY option is turned ON as shown. AutoCAD Fundamentals 1-15 The CAD Database and the User Coordinate System  Designs and drawings created in a CAD system are usually defined and stored using sets of points in what is called world space. In most CAD systems, the world space is defined using a three-dimensional Cartesian coordinate system. Three mutually perpendicular axes usually referred to as the X-, Y-, and Z-axes, define this system. The intersection of the three coordinate axes forms a point called the origin. Any point in world space can then be defined as the distance from the origin in the X-, Y- and Zdirections. In most CAD systems, the directions of the arrows shown on the axes identify the positive sides of the coordinates. A CAD file, which is the electronic version of the design, contains data that describes the entities created in the CAD system. Information such as the coordinate values in world space for all endpoints, center points, etc., along with the descriptions of the types of entities are all stored in the file. Knowing that AutoCAD stores designs by keeping coordinate data helps us understand the inputs required to create entities. 3D UCS icon The icon near the bottom left corner of the default AutoCAD graphics window shows the positive X-direction and positive Y-direction of the coordinate system that is active. In AutoCAD, the coordinate system that is used to create entities is called the user coordinate system (UCS). By default, the user coordinate system is aligned to the world coordinate system (WCS). The world coordinate system is a coordinate system used by AutoCAD as the basis for defining all objects and other coordinate systems defined by the users. We can think of the origin of the world coordinate system as a fixed point being used as a reference for all measurements. The default orientation of the Z-axis can be considered as positive values in front of the monitor and negative values inside the monitor. 1-16 AutoCAD® 2014 Tutorial: 2D Fundamentals Changing to the 2D UCS Icon Display  In AutoCAD® 2014, the UCS icon is displayed in various ways to help us visualize the orientation of the drawing plane. 1. Click on the View pull-down menu and select [Display]  [UCS Icon]  [Properties] 2. In the UCS icon style section, switch to the 2D option as shown. 3. Click OK to accept the settings.  Note the W symbol in the UCS icon indicates that the UCS is aligned to the world coordinate system. AutoCAD Fundamentals 1-17 Cartesian and Polar Coordinate Systems In a two-dimensional space, a point can be represented using different coordinate systems. The point can be located, using a Cartesian coordinate system, as X and Y units away from the origin. The same point can also be located using the polar coordinate system, as r and θ units away from the origin. For planar geometry, the polar coordinate system is very useful for certain applications. In the polar coordinate system, points are defined in terms of a radial distance, r, from the origin and an angle θ between the direction of r and the positive X axis. The default system for measuring angles in AutoCAD® 2014 defines positive angular values as counter-clockwise from the positive X-axis. Absolute and Relative Coordinates • AutoCAD® 2014 also allows us to use absolute and relative coordinates to quickly construct objects. Absolute coordinate values are measured from the current coordinate system's origin point. Relative coordinate values are specified in relation to previous coordinates.  Note that the coordinate display area can also be used as a toggle switch; each leftmouse-click will toggle the coordinate display on or off. In AutoCAD® 2014, the absolute coordinates and the relative coordinates can be used in conjunction with the Cartesian and polar coordinate systems. By default, AutoCAD expects us to enter values in absolute Cartesian coordinates, distances measured from the current coordinate system's origin point. We can switch to using the relative coordinates by using the @ symbol. The @ symbol is used as the relative coordinates specifier, which means that we can specify the position of a point in relation to the previous point. 1-18 AutoCAD® 2014 Tutorial: 2D Fundamentals Defining Positions In AutoCAD, there are five methods for specifying the locations of points when we create planar geometric entities.  Interactive method: Use the cursor to select on the screen.  Absolute coordinates (Format: X,Y): Type the X and Y coordinates to locate the point on the current coordinate system relative to the origin.  Relative rectangular coordinates (Format: @X,Y): Type the X and Y coordinates relative to the last point.  Relative polar coordinates (Format: @Distance<angle): Type a distance and angle relative to the last point.  Direct Distance entry technique: Specify a second point by first moving the cursor to indicate direction and then entering a distance. GRID Style Setup 1. In the Status Bar area, right-mouse-click on SnapMode and choose [Settings]. 2. In the Drafting Settings dialog box, select the Snap and Grid tab if it is not the page on top. 3. Change Grid Style to Display dotted grid in 2D model Space as shown in the below figure. 4. Pick OK to exit the Drafting Settings dialog box. AutoCAD Fundamentals 1-19 The GuidePlate We will next create a mechanical design using the different coordinate entry methods.  The rule for creating CAD designs and drawings is that they should be created at full size using real-world units. The CAD database contains all the definitions of the geometric entities and the design is considered as a virtual, full-sized object. Only when a printer or plotter transfers the CAD design to paper is the design scaled to fit on a sheet. The tedious task of determining a scale factor so that the design will fit on a sheet of paper is taken care of by the CAD system. This allows the designers and CAD operators to concentrate their attention on the more important issues – the design. 1. Select the Line command icon in the Draw toolbar. In the command prompt area, near the bottom of the AutoCAD graphics window, the message “_line Specify first point:” is displayed. AutoCAD expects us to identify the starting location of a straight line. 2. We will locate the starting point of our design at the origin of the world coordinate system. Command: _line Specify first point: 0,0 (Type 0,0 and press the [ENTER] key once.) 1-20 AutoCAD® 2014 Tutorial: 2D Fundamentals 3. We will create a horizontal line by entering the absolute coordinates of the second point. Specify next point or [Undo]: 5.5,0 [ENTER] (0,0) • (5.5,0) Note that the line we created is aligned to the bottom edge of the drawing window. Let us adjust the view of the line by using the Pan Realtime command. 4. In the Menu Bar area select: [View]  [Pan]  [Realtime]  The available Pan commands enable us to move the view to a different position. The Pan-Realtime function acts as if you are using a video camera. 5. Move the cursor, which appears as a hand inside the graphics window, near the center of the drawing window, then push down the left-mouse-button and drag the display toward the right and top side until we can see the sketched line. (Notice the scroll bars can also be used to adjust viewing of the display.) AutoCAD Fundamentals 1-21 6. Press the [Esc] key to exit the Pan-Realtime command. Notice that AutoCAD goes back to the Line command. 7. We will create a vertical line by using the relative rectangular coordinates entry method, relative to the last point we specified: Specify next point or [Close/Undo]: @0,2.5 [ENTER] 8. We can mix any of the entry methods in positioning the locations of the endpoints. Move the cursor to the Status Bar area, and turn ON the SNAP MODE option.  Note that the Line command is resumed as the settings are adjusted. 9. Left-click once on the coordinates display area to switch to a different coordinate display option. Each click will change the coordinate display. 10. Note the coordinates display area has changed to show the length of the new line and its angle. Left-click once on the coordinates display area to switch back to using the world coordinate system. 11. Create the next line by picking the location, world coordinates (8,2.5), on the screen. 1-22 AutoCAD® 2014 Tutorial: 2D Fundamentals 12. We will next use the relative polar coordinates entry method, relative to the last point we specified: Specify next point or [Close/Undo]: @3<90 [ENTER] (Distance is 3 inches with an angle of 90 degrees.) Reference Coordinate System aligned at the previous point 13. Using the relative rectangular coordinates entry method to create the next line, we can imagine a reference coordinate system aligned at the previous point. Coordinates are measured along the two reference axes. Specify next point or [Close/Undo]: @-1.5,1 [ENTER] (-1.5 and 1 inches are measured relative to the reference point.) 14. Move the cursor directly to the left of the last point and use the direct distance entry technique by entering 6.5 [ENTER]. 15. For the last segment of the sketch, we can use the Close option to connect back to the starting point. Inside the graphics window, right-mouse-click and a popup menu appears on the screen. 16. Select Close with the left-mouse-button to connect back to the starting point and end the Line command. AutoCAD Fundamentals 1-23 Creating Circles • The menus and toolbars in AutoCAD® 2014 are designed to allow the CAD operator to quickly activate the desired commands. 1. In the Draw toolbar, click on the little triangle below the circle icon. Note that the little triangle indicates additional options are available. 2. In the option list, select: [Center, Diameter] Notice the different options available under the circle submenu: • Center, Radius: Draws a circle based on a center point and a radius. • Center, Diameter: Draws a circle based on a center point and a diameter. • 2 Points: Draws a circle based on two endpoints of the diameter. • 3 Points: Draws a circle based on three points on the circumference. • TTR–Tangent, Tangent, Radius: Draws a circle with a specified radius tangent to two objects. • TTT–Tangent, Tangent, Tangent: Draws a circle tangent to three objects. 1-24 AutoCAD® 2014 Tutorial: 2D Fundamentals 3. In the command prompt area, the message “Specify center point for circle or [3P/2P/Ttr (tan tan radius)]:” is displayed. AutoCAD expects us to identify the location of a point or enter an option. We can use any of the four coordinate entry methods to identify the desired location. We will enter the world coordinates (2.5,3) as the center point for the first circle. Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: 2.5,3 [ENTER] 4. In the command prompt area, the message “Specify diameter of circle:” is displayed. Specify diameter of circle: 2.5 [ENTER] 5. Inside the graphics window, right-mouse-click to bring up the popup option menu. 6. Pick Repeat CIRCLE with the left-mouse-button in the popup menu to repeat the last command. 7. Using the relative rectangular coordinates entry method, relative to the center-point coordinates of the first circle, we specify the location as (2.5,2). Specify center point for circle or [3P/2P/Ttr (tan tan radius)]: @2.5,2 [ENTER] AutoCAD Fundamentals 1-25 8. In the command prompt area, the message “Specify Radius of circle: <2.50>” is displayed. The default option for the Circle command in AutoCAD is to specify the radius and the last radius used is also displayed in brackets. 9. Inside the graphics window, right-mouse-click to bring up the popup option menu and select Diameter as shown. 10. In the command prompt area, enter 1.5 as the diameter. Specify Diameter of circle<2.50>: 1.5 [ENTER] Saving the CAD Design 1. In the Application Menu, select: [Application]  [Save]  Note the command can also be activated with quickkey combination of [Ctrl]+[S]. 1-26 AutoCAD® 2014 Tutorial: 2D Fundamentals 2. In the Save Drawing As dialog box, select the folder in which you want to store the CAD file and enter GuidePlate in the File name box. Select the folder to store the file. Enter GuidePlate 3. Click Save in the Save Drawing As dialog box to accept the selections and save the file. Note the default file type is DWG, which is the standard AutoCAD drawing format. Close the Current Drawing  Several options are available to close the current drawing:  Select [Close]  [Current Drawing] in the Application Menu Bar as shown.  Enter Close at the command prompt.  The third option is to click on the [Close] icon, located at the upper-right-hand corner of the drawing window. AutoCAD Fundamentals 1-27 The Spacer Design  We will next create the spacer design using more of AutoCAD’s drawing tools. Start a New Drawing 1. In the Application Menu, select [New] to start a new drawing. 2. The Select Template dialog box appears on the screen. Accept the default acad.dwt as the template to open.  The dwt file type is the AutoCAD template file format. An AutoCAD template file contains predefined settings to reduce the amount of tedious repetitions. 1-28 AutoCAD® 2014 Tutorial: 2D Fundamentals Drawing Units Setup  Every object we construct in a CAD system is measured in units. We should determine the system of units within the CAD system before creating the first geometric entities. 1. In the Menu Bar select: [Format]  [Units] • The AutoCAD Menu Bar contains multiple pull-down menus, where all of the AutoCAD commands can be accessed. Note that many of the menu items listed in the pull-down menus can also be accessed through the Quick Access toolbar and/or Ribbon panels. 2. Click on the Length Type option to display the different types of length units available. Confirm the Length Type is set to Decimal. 3. On your own, examine the other settings that are available. 4. In the Drawing Units dialog box, set the Length Type to Decimal. This will set the measurement to the default English units, inches. AutoCAD Fundamentals 1-29 5. Set the Precision to two digits after the decimal point as shown in the above figure. 6. Pick OK to exit the Drawing Units dialog box. Drawing Area Setup  Next, we will set up the Drawing Limits by entering a command in the command prompt area. Setting the Drawing Limits controls the extents of the display of the grid. It also serves as a visual reference that marks the working area. It can also be used to prevent construction outside the grid limits and as a plot option that defines an area to be plotted/printed. Note that this setting does not limit the region for geometry construction. 1. In the Menu Bar select: [Format]  [Drawing Limits] 2. In the command prompt area, the message “Reset Model Space Limits: Specify lower left corner or [On/Off] <0.00,0.00>:” is displayed. Press the ENTER key once to accept the default coordinates <0.00,0.00>. 3. In the command prompt area, the message “Specify upper right corner <12.00,9.00>:” is displayed. Press the ENTER key again to accept the default coordinates <12.00,9.00>. 1-30 AutoCAD® 2014 Tutorial: 2D Fundamentals 4. On your own, move the graphics cursor near the upper-right comer inside the drawing area and note that the drawing area is unchanged. (The Drawing Limits command is used to set the drawing area, but the display will not be adjusted until a display command is used.) 5. Inside the Menu Bar area select: [View]  [Zoom]  [All]  The Zoom All command will adjust the display so that all objects in the drawing are displayed to be as large as possible. If no objects are constructed, the Drawing Limits are used to adjust the current viewport. 6. Move the graphics cursor near the upper-right comer inside the drawing area, and note that the display area is updated. 7. In the Status Bar area, right-mouse-click on SnapMode and choose [Settings]. 8. In the Drafting Settings dialog box, switch on the Snap and Grid options as shown.  On your own, exit the Drafting Settings dialog box and reset the status buttons so that only GRID DISPLAY and SNAP MODE are turned ON as shown. AutoCAD Fundamentals 1-31 Using the Line Command 1. Select the Line command icon in the Draw toolbar. In the command prompt area, near the bottom of the AutoCAD graphics window, the message “_line Specify first point:” is displayed. AutoCAD expects us to identify the starting location of a straight line. 2. To further illustrate the usage of the different input methods and tools available in AutoCAD, we will start the line segments at an arbitrary location. Start at a location that is somewhere in the lower left side of the graphics window. 3. We will create a horizontal line by using the relative rectangular coordinates entry method, relative to the last point we specified: @6,0 [ENTER] 4. Next, create a vertical line by using the relative polar coordinates entry method, relative to the last point we specified: @3<90 [ENTER] 5. Next, we will use the direct input method. First, move the cursor directly to the left of the last endpoint of the line segments. 1-32 AutoCAD® 2014 Tutorial: 2D Fundamentals 6. Use the direct distance entry technique by entering 2 [ENTER]. 7. On your own, repeat the above steps and create the four additional line segments, using the dimensions as shown. 8. To end the line command, we can either hit the [Enter] key on the keyboard or use the Enter option, right-mouse-click and a popup menu appears on the screen. 9. Select Enter with the left-mouse-button to end the Line command. AutoCAD Fundamentals 1-33 Using the ERASE Command  The vertical line on the right was created as a construction line, to aide the construction of the rest of the lines for the design. We will use the Erase command to remove it. 1. Pick Erase in the Modify toolbar. The message “Select objects” is displayed in the command prompt area and AutoCAD awaits us to select the objects to erase. 2. Select the vertical line as shown. 3. Click once with the right-mouse-button to accept the selection and delete the line. Using the Arc Command 1. Click the down-arrow icon of the Arc command in the Draw toolbar to display the different Arc construction options.  AutoCAD provides eleven different ways to create arcs. Note that the different options are used based on the geometry conditions of the design. The more commonly used options are the 3-Points option and the Center-StartEnd option. 2. Select the Center-Start-End option as shown. This option requires the selection of the center point, start point and end point location, in that order, of the arc. 1-34 AutoCAD® 2014 Tutorial: 2D Fundamentals 3. Move the cursor to the middle of the two horizontal lines and align the cursor to the two endpoints as shown. Click once with the rightmouse-button to select the location as the center point of the new arc. 4. Move the cursor downward and select the right endpoint of the bottom horizontal line as the start point of the arc. 5. Move the cursor to the right endpoint of the top horizontal line as shown. Pick this point as the endpoint of the new arc. 6. On your own, repeat the above steps and create the other arc as shown. Note that in most CAD packages, positive angles are defined as going counterclockwise; therefore the starting point of the second arc should be at the endpoint on top. AutoCAD Fundamentals 1-35 Using the Circle Command 1. Select the [Circle]  [Center, Diameter] option as shown. 2. Select the same location for the arc center as the center point for the new circle. 3. In the command prompt area, the message “Specify diameter of circle:” is displayed. Specify diameter of circle: 1.25 [ENTER] 4. On your own, create the other circle and complete the drawing as shown. 1-36 AutoCAD® 2014 Tutorial: 2D Fundamentals Saving the CAD Design 1. In the Quick Access Toolbar, select: [Save]  Note the command can also be activated with quick-key combination of [Ctrl]+[S]. 2. In the Save Drawing As dialog box, select the folder in which you want to store the CAD file and enter Spacer in the File name box. 3. Click Save in the Save Drawing As dialog box to accept the selections and save the file. Note the default file type is DWG, which is the standard AutoCAD drawing format. Exit AutoCAD 2014  To exit AutoCAD® 2014, select Exit AutoCAD in the Menu Bar or type QUIT at the command prompt. Note the command can also be activated with quick-key combination of [Ctrl]+[Q]. AutoCAD Fundamentals 1-37 Review Questions: (Time: 20 minutes) 1. What are the advantages and disadvantages of using CAD systems to create engineering drawings? 2. What is the default AutoCAD filename extension? 3. How do the GRID and SNAP options assist us in sketching? 4. List and describe the different coordinate entry methods available in AutoCAD? 5. When using the Line command, which option allows us to quickly create a linesegment connecting back to the starting point? 6. List and describe the two types of coordinate systems commonly used for planar geometry. 7. Which key do you use to quickly cancel a command? 8. When you use the Pan command, do the coordinates of objects get changed? 9. Find information on how to draw ellipses in AutoCAD through the Autodesk Exchange, and create the following arc. If it is desired to position the center of the ellipse to a specific location, which ellipse command is more suitable? 10. Find information on how to draw arcs in AutoCAD through the Autodesk Exchange and create the following arc. List and describe two methods to create arcs in AutoCAD. 1-38 AutoCAD® 2014 Tutorial: 2D Fundamentals Exercises: (All dimensions are in inches.) (Time: 60 minutes) 1. Angle Spacer 2. Base Plate AutoCAD Fundamentals 3. T-Clip 4. Channel Plate 1-39