Qp

Figure 10.2 100 200 300 J J J specimen position: core longitudinal specimen shape: ISO V

This Standard covers the minimum welding requirements, for welding of shop and field fabrications and the weld inspection of the following: 1. Pressure containing equipment and piping, whether code stamped or not, including but not limited to: rotating equipment, boilers, pressure vessels, heat exchangers, air coolers, shop and field fabricated piping, fired heater tubes, storage tanks, stacks and their attachments. 2. Equipment or piping containing toxic or corrosive materials. 3. Structural Steel 4. Other fabrications where specified. B. This Standard modifies the requirements of applicable ASME, AWS, API and ANSI codes and standards in effect at the revision date. C. Conflicts between requirements of this Standard, related specifications, standards, codes, purchase orders or drawings shall be clarified with Client or Client's Engineer (designated Contractor) prior to proceeding with the fabrication of the affected parts. Regarding conflicts, the Client reserves the right of final decision. D. Where conflicts exist between this Engineering Standard and other POLARIS Engineering Standards and/or applicable codes or regulations, the more stringent requirement shall govern. All conflicts shall be brought to the Client's attention for resolution. The Client shall be the sole arbiter of any conflicts. II. REFERENCES This POLARIS Standard is to be used in conjunction with the latest revision of the standards and codes listed below, unless specifically noted. The terminology "latest revision" shall be interpreted as the revision in effect at the time of contract award. This POLARIS Standard may reference specific sections of some of these codes and standards. The revision of the codes and standards being referenced is noted below in parenthesis. This information is provided to identify the subject matter being referenced. Changes or exceptions made to the referenced code or standard shall apply to later revisions as applicable. A.

This international code or standard was developed under procedures accredited as meeting the criteria for American National Standards and it is an American National Standard. The Standards Committee that approved the code or standard was balanced to assure that individuals from competent and concerned interests have had an opportunity to participate. The proposed code or standard was made available for public review and comment that provides an opportunity for additional public input from industry, academia, regulatory agencies, and the public-at-large. ASME does not "approve," "certify," "rate," or "endorse" any item, construction, proprietary device, or activity. ASME does not take any position with respect to the validity of any patent rights asserted in connection with any items mentioned in this document, and does not undertake to insure anyone utilizing a standard against liability for infringement of any applicable letters patent, nor assume any such liability. Users of a code or standard are expressly advised that determination of the validity of any such patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Participation by federal agency representative(s) or person(s) affiliated with industry is not to be interpreted as government or industry endorsement of this code or standard. ASME accepts responsibility for only those interpretations of this document issued in accordance with the established ASME procedures and policies, which precludes the issuance of interpretations by individuals. The endnotes and preamble in this document (if any) are part of this American National Standard. ASME Collective Membership Mark ASME Single Certification Mark "ASME" and the above ASME symbols are registered trademarks of The American Society of Mechanical Engineers. No part of this document may be reproduced in any form, in an electronic retrieval system or otherwise, without the prior written permission of the publisher.

Estudios de Lingüística Universidad de Alicante (ELUA), 2023

Uno de los motivos que empujaron a Manuel Casado Velarde a escribir este Curso de semántica léxica del español y que justifican la oportunidad de su publicación es, según se indica en la Presentación, «la notoria escasez de visiones de conjunto de la semántica léxica del español» (p. 13). Aunque en las últimas dos