Dr Mohamed Gadallah CV

Mohamed H. Gadallah Professor of Industrial Engineering and Operations Research, Faculty of Engineering, Cairo University Technical Advisor, Education Development Fund (EDF) - The Egyptian Cabinet of Ministers Total Quality Management Consultant Higher Education Accreditation Consultant (ABET/ NARS) Associate Editor, Journal of Collaborative Intelligent Manufacturing, China BUSINESS INFORMATION Professor of Industrial Engineering & Operations Research Department of Mechanical Design & Production Cairo University Giza, 12613 Egypt Email: [email protected] PERSONAL INFORMATION 19 Amer Street, El-Mesaha Square, Dokki, Giza, Egypt # 113 Tel: (0202)-01222139310 Fax: (0202)-35673025 E-mail: [email protected] https://aucegypt.academia.edu/MohamedHGadallah http://staff.eng.cu.edu.eg/mhg http://scholar.cu.edu.eg/mgadallah https://www.scopus.com/authid/detail.uri?authorId=7005555423 https://orcid.org/0000-0003-4379-2223 https://scholar.google.sk/citations?user=sEV_s1gAAAAJ&hl=en Nationality: Egyptian and Canadian Landed Immigrant DATE of BIRTH: September 30th, 1965. ACADEMIC RANK Professor of Industrial Engineering & Operations Research Department of Mechanical Design & Production Engineering, Faculty of Engineering, Cairo University, Egypt 12613. Promoted to Professor of Operations Research, 2009 Promoted to Professor of Industrial Engineering, 2010 Member of National Promotion Committee for Industrial Engineering, 2010 – Current. DEGREES Visiting Scolar, University of Mons, 2015, Belgium Visiting Scolar, University of Illinois at Chicago, 2004, USA Visiting Scholar, Indiana University – Purdue University, 2001, USA Ph.D.: Mc Master University, Industrial Engineering, 1995, Canada M.Sc.:The American University in Cairo, Material Engineering, 1990, Egypt B.Sc.: The American University in Cairo, Mech. Engineering (High Honors), 1988, Egypt YEARS of EXPERIENCE: Appointment Date at Cairo University: May 1998 – Current. OTHER RELATED EXPERIENCE: 2016 - Current Education Development Fund (EDF), Egyptian Cabinet of Ministers, Egypt. 2014 – Current Professor of Industrial Engineering & Operations Research, Cairo University 2013 – 2014 Professor, Department of Engineering Management, College of Engineering, Prince Sultan University, Riyadh, Saudi Arabia 11586 2012 - 2013 Education Development Fund (EDF), Egyptian Cabinet of Ministers, Egypt. 2011 – Current Professor of Industrial Engineering & Operations Research, Cairo University. 1 2009 - 2010 2008 2005-2008 2002-2005 1998-2002 1996-1997 1995-1996 Professor & Head, Operations Research Department, ISSR, Cairo University. Associate Professor, Mechanical Engineering Department, The American University in Cairo. Associate Professor, Mechanical & Industrial Engineering Department, Qatar University. Associate Professor, Mechanical Engineering Department, The American University in Cairo. Assistant Professor of O.R., ISSR, Cairo University, Egypt. Assistant Professor, Department of Industrial Engineering & Management, Arab Academy for Science & Technology, Alexandria, Egypt. Engineering Manager, ABC Group of Canada, Etibocock, Canada. Adjunct Positions Adjunct Professor, Renewable Energy Engineering , Zeweil City for Science & Tecnology. Adjunct Professor, Industrial, Service and Management Engineering , Nile University. Adjunct Professor, Industrial Engineering , Misr University for Science & Technology. Adjunct Professor, Industrial Engineering , The British University in Egypt. Adjunct Professor, Industrial Engineering , The German University in Cairo. Adjunct Professor, Industrial Eng. & Management, Arab Academy for Science & Technology, Alexandria, Egypt. RESEARCH EXPERIENCE Development of robust design methodology and application to product and process design Development of a statistical Optimization procedure for design Centering and Tolerancing problems Development of an algorithm for form tolerance evaluation and Inspection of engineering features (2-D and 3-D) Development of a discrete Optimization algorithm for discrete and Combinatorial applications Development of a design methodology for assembly sequence of Door parts (Lumina Car produced by GM) from 1991-1992 I am well acquainted with Geometric Dimensioning and Tolerancing Standards and their Applications in Design I am well acquainted with Taguchi quality techniques, this includes: Fundamentals of experimental design techniques - Analysis of variance, one way, two way, three ways. Etc. - Signal to Noise ratios - Other statistical analysis methods - Orthogonal Arrays (Coded Designs) - Applications In Design I am well acquainted with the use of following standard software packages - ANSYS - NASTRAN (Linear and Non-linear Analysis) - I-DEAS (Solid Modeling and Finite Element Analysis) - MATRIX-X (Matrix Analysis and Computation) I am knowledgeable in the following areas - Tolerance Analysis and Synthesis - Design Theories and Methodologies (Nam Suh Theory, ..etc.) - Robust and Experimental Design and Optimization Approaches - Concurrent Design: Research, Applications and Tools. INDUSTRIAL EXPERIENCE Designing and assembling of central air conditioning. Feasibility study of nuclear power plant for electric generation (Funded by American Agency For International Development and Atomic Energy of Canada Ltd.) Experience with managing projects in areas of manufacturing (extrusion blow moulding) - ISO 9000 requirements and documentation - PPAP submission and requirements - Preparation of : Control plan, Process failure mode and effect analysis, Measurement system studies, Prototype and design tuning, Process flow diagram, etc. CONSULTATIONS: - Poly Tech. Egypt Co., 2nd Industrial Zone, Piece # 46 A – Badr City. Industrial Modernization Centre Assignment, July 2006. 2 - Industrial Modernization Centre, SEKEM Group of Companies, IMC/EGY/IEWP-II.3 (iii)/CMT, April 2002, Egypt. -Bi-Shop Steering Technology, Indianapolis, IN, USA, March 2001. - TOTAL QUALITY MANAGEMENT CONSULTANT, RGI (A Holding Company of Ghabbour Egypt) , April 1st, 1998 ~ July 30th, 2000. - TOTAL QUALITY MANAGEMENT CONSULTANT, The Egyptian Italian Co. for Metal Forming, 10th of Ramadan City, the 3rd Industrial Zone, Egypt, SEPTEMBER 1996 ~ APRIL, 1997. INDUSTRIAL TRAINING: I have delivered training and consultations to several industries, some are listed below: 1. Bechtel Overseas 2. LCF Manufacturing in Canada (as Eng. Manager) 3. Kandil Steel, Egypt (Quality Consultant) 4. Prima Eng. Industries (Total Quality Consultant) 5. Ghabour Auto (Total Quality Consultant) 6. Nissan Egypt (General Manager) 7. SEKEM Group (Egypt) (Quality and Productivity Consultant) 8. Chint EGimak (Egypt) (Training - Production Planning & Control) 9. Qatar Steel (Qatar) (Training - Quality Circles, ISO 9000 & certification) 10. The American University in Cairo, Egypt (Training - Quality Engineering) 11. Bi-Shop Steering Technology, Indianapolis, US (Training - Geometric Dimensioning & Tolerancing Standards) 12. TOSHIBA El Araby (TQM Training) 13. SAFOLA EGYPT (TQM Training) Published Books 1. Gadallah, M.H. and ElMaraghy, H.A., "A New Algorithm For Combinatorial Optimization: Application to Tolerance Synthesis with Optimum Process Selection", Geometric Design Tolerancing: Theories and Applications, Editor: Hoda A. El-Maraghy, Chapman and Hall, Chapter IV, pp. 265-281, 1998. 2. M.H. Gadallah and H.A. ElMaraghy, "A Statistical Optimization Approach to Robust Design", A Contributed chapter to Simultaneous Engineering: Theory and Methodology, Gordon and Breach, Roy, V., J.M. Usher and H.R. Parsaei (Editor), Chapter V, pp. 135-158, 1998. COURSES TAUGHT: Semester Course No. Name U = Undergraduate Course, G = Graduate Course Contact Hours/wk Cairo University, Department of Mechanical Design and Production Fall 2016 MDP 660 Statistical Analysis & Design of Experiments Spring 2016 MDP 362 Eng. Operations Research (U) MDPN 441 Design for Manufacturing (U) MDP 308 Quality Management (U) MDP 660 Statistical Analysis & Design of Experiments Cairo University, Department of Mechanical Design and Production Fall 2014 MDP 308 Quality Management (U) MDPN 444 Quality Control (U) MDP 660 Statistical Analysis & Design of Experiments Nile University Fall 2014 IENG 503 Modeling of Industrial Systems IENG 305 Services, Management Engineering Prince Sultan University Spring 2014 Operations Research Engineering Economy Production & Inventory Control Facility Management Fall 2013 Operations Research Engineering Economy Production & Inventory Control 3 3 3 (G) 3 3 (G) 3 3 3 Fall 2015 3 3 3 4 3 3 3 4 3 3 German University in Cairo Spring 2013 Capstone Graduation Projects Nile University Spring 2013 Math 302 Probability & Statistics for Engineers IENG 308 Human Factors Engineering Cairo University Spring 2013 MDP 361 Engineering Operations Research MDPN 331 Engineering Operations Research MDPN 441 Design for Manufacturing MDP 480 Senior Project Nile University Fall 2012 MOT 631 Problem Solving Techniques & Decision Making Cairo University, Department of Mechanical Design and Production Fall 2012 MDP 308 Quality Management (U) MDPN 444 Quality Control (U) MDP 660 Statistical Analysis & Design of Experiments German University in Cairo Spring 2012 Capstone Graduation Projects Nile University Spring 2012 Math 302 Probability & Statistics for Engineers IENG 308 Human Factors Engineering Cairo University, Department of Mechanical Design and Production Spring 2012 MDP 306 Engineering Economy & Accounting (U) MDPN 331 Engineering Operations Research (U) MDP 639 Advanced Topics in IE (G) MDP 480 Senior Project Fall 2011 MDP 308 Quality Management (U) MDPN 434 Work Design & Ergonomics (U) MDP 635 Quality Engineering (G) Spring 2010 MDP 306 Engineering Economy & Accounting (U) MDPN 331 Engineering Operations Research (U) MDP 633 Modeling & Analysis of Industrial Systems (G) Fall 2009 Quality Management (Quality & Process Control) (U) (G) 4 3 3 3 3 5 3 3 3 3 4 3 3 3 2 5 3 3 3 3 3 3 3 Cairo University, Operations Research Department Spring 2009 O.R. 611 Advanced Modeling & Simulation (G) O.R. 509, 529 Systems Economy I,II (G) 3 3 The American University in Cairo Fall 2002 ~ MENG342 Statistical Process Control (U) 2005 ENGR 445 Production Planning & Inventory Control (U) ENGR 512 Experimental Methods in Engineering (G) MENG439 Advanced Manufacturing Processes (U) MENG 341 Engineering Operations Research (U) ENGR 543 Modeling, Simulation & Optimization (G) ENGR 542 Total Quality Management (G) MENG439 Advanced Manufacturing Processes (U) ENGR 345 Engineering Economy (U) ENGR 518 Engineering Statistics (G) 3 3 3 3 3 3 3 3 3 3 Qatar University, Mechanical and Industrial Engineering Department Spring 2007 507337 Production Planning & Inventory Control 507350 Computer Simulation Systems 507310 Facility Layout Design 501360 Engineering Economics Fall 2007 507460 Manufacturing Systems Design 501200 Probability & Statistics for Engineers 507498 Industrial Systems Design 3 3 3 3 3 3 3 4 (U) (U) (U) (U) (U) (U) (U) Spring 2008 507350 507310 501200 Computer Simulation Systems Facility Layout Design Probability & Statistics for Engineers The Britsih University in Egypt 2008~ 2009 Plant Layout & Inventory Control Design Methods 2016 Research Graduation Projects (U) (U) (U) 3 3 3 (U) (U) (U) 3 3 3 Research Interests 1- Experimental design for product and process optimization. 2- Quality engineering: Taguchi methods; robust design;Statistical methodologies. 3- Systems modeling, optimization and meta-heuristics. 4- Approximation Techniques in Combinatorial optimization. 5- Response Surface Methodology (RSM) & Applications. 6- Particle Swarm Optimization and Applications to large scale nonlinear problems. 7. The Reduced Tolerance Analysis and Synthesis Problem. 8. Multi-Objective Optimization Quality Indices – A Comparative Analysis. 9. An Alternative to Monte Carlo Simulation Algorithm via Orthogonal Arrays. 10. Hybrid Particle Swarm Optimization and Design of Experiments. 11. Modeling and Optimization of Electric Discharge Machining. 12. Modeling and Optimization of Laser Cutting Operations. 13. Tolerance Analysis via an Alternative to Monte Carlo Simulation. 14. Particle Swarm Optimization using Design of Experiments. Intensive Short Courses - Geometric Dimensioning and Tolerancing Standards, Bi-Shop Steering Technology, Indianapolis, IN, USA, 2001. - Quality Circles, QATAR STEEL Co. July 1-5th, 2007 - ISO 9000/14001, QATAR STEEL Co. October 21st - 25th, 2008 Departmental, College and University Services: - Supreme Council of Universities, 2018-current. - Supreme Universities Council, Misr University for Science & Technology Assessment, 2013. - Cairo University, Departmental Accreditation Committee, 2012 – Current. - Cairo University, Faculty of Engineering, Post graduate Committee, 2011-Current. - Cairo University, Faculty of Engineering Strategic Committee, 2011-Current. - Cairo University, Head of Department, January 2009 -2010. - The American University in Cairo, ABET Departmental Work, November 16-19, 2002. - The American University in Cairo, Departmental Research Committee. - The American University in Cairo, Undergraduate Departmental Advisor from 2002 ~ 2003. - The American University in Cairo, Mechanical Club Faculty Coordinator. - Qatar University, Undergraduate Departmental Advisor from 2005 ~ 2008. - Qatar University, ABET preparation for Accreditation. - Binational Fulbright Commission Member in Selection Committee for Research/ Lecturing Program 2003 ~ 2005. - Cairo University, Strategic Committee member, 2011. External Examiner: 1. I served as an external examiner for Ph.D. Thesis “Enhancing Dynamic Stability of Beam-Like Structures for Excessive Vibrations” by C. S. Anderson, Mechanical Engineering Department, Victoria University, Australia, 2003. 2. Supervisory Committee Member on M.Sc. Thesis by Suzan Abd El-Shahid, Supervisor Dr. Ashraf Abd El-Bary, Department of Computer Science, The American University in Cairo, 2004. 3. I served as an external examiner for a Ph.D. Thesis "An Investigation of Electro-Rheological Fluids in Engineering", by Tam Dinh Truong - Department of Mechanical Engineering, Victoria University of Technology, Melbourne, Australia, 2006. 4. I served as an external examiner for a Ph.D. Thesis "Liquid Sloshing in Containers with Flexibility", by Marija Gradinscak - Department of Mechanical Engineering, Victoria University, Melbourne, Australia, 2009. 5. I served as an external examiner for M.Sc. Thesis, “Improving Reliability by Modifying System Configuration”, by Dina Mokhtar, Alexandria University, Department of Production Engineering, 2011. 5 6. I served as an external examiner for M.Sc. Thesis, “Optimized Balanced Score Card Integrated Model for Evaluation of Organizations”, by Hagag Maher Abou Al-Hassan, Cairo University, Department of Mechanical Design and Production Engineering, 2011. 7. Mona, A. A. Shady, “Particle Swarm Optimization - Applications to Small and Large Scale Problems”, M.Sc. in Operations Research, ISSR, Cairo University, 2012. 8. I served as an external examiner for M.Sc. Thesis, “Optimized Balanced Score Card Integrated Model for Evaluation of Organizations”, by Hagag Maher Abou Al-Hassan, Cairo University, Department of Mechanical Design and Production Engineering, 2011. 9. I served as an external examiner for M.Sc. Thesis, “Recent Multi-Objective Optimization Approaches to water Resources Systems Planning under Uncertainity Environment”, by Ibrahim M. Hezam Almishanah, Helwan University, Department of Mathemtics, 2011. 10. I served as an external examiner for M.Sc. Thesis, “A Simulation Study for Dynamic Flexible Job Shop Scheduling with Sequence Dependent Set up Times”, by Zakaria Y. Abdel Rasoul Abdel Gawad, Cairo University, Department of Mechanical Design and Production Engineering, 2012. 11. Amr M. T. Eslahy, “Resource Constrained Project Scheduling Using GA”, Ain Shams University, Cairo, Egypt, 2013. 12. Hanaa Soliman Abou Hashima, " Application of Six Sigma Methodology and Design of Experiments for Process Improvement in Industrial Companies", Fayoum University, Department of Industrial Engineering, 2016. Supervisor: 1. Amr I. Shabaka "Combined Genetic Algorithm and Experimental Design for Optimum Tolerance Allocation”, M.Sc. Thesis, Faculty of Engineering, Cairo University, 2002. 2. Khaled Abd El-Hamid “A Neural Network Model for Metal Cutting using Approximations”, M.Sc. in Industrial Engineering, M.Sc. Thesis, The American University in Cairo, Joint supervision with Dr. Keith Hekman, 2004. 3. Mohamed H. Mahgoub “Ti , Si Policy Inventory Model Deteriorating Items with Linear Demand rate & Probabilistic Deterioration”, M.Sc. in Operations Research, 2009. 4. Reda El-sayed A. Hassan, “ Response Surface Methodology for Solving Machining Parameter Optimization Problems”, Ph.D. Thesis in Operations Research, 2010. 5. Ahmed Z. Imam, “Particle Swarm Optimization using a Triggered Approach”, M.Sc. in Operations Research, ISSR, Cairo University, 2012. 6. Hisham M. Lotfy A. Rahman, “Using Safety Analysis Techniques in Nuclear Power Plants”, M.Sc. in Industrial Engineering, Cairo University, 2013 (Jointly with Professor Rashaad El Hebery). 7. Mohamed M. Abdel Razik, “Approximate Techniques for Solving Multi-Objective Problems”, M.Sc. in Operations Research, Cairo University, 2013. 8. Mohamed Shahat Abdel Azim Badawy, “Robust Design & Optimization Techniques”, M.Sc. in Industrial Engineering, Cairo University, 2013. 9. Mai Salah ElDin Abdel Aziz, “Hybrid Particle Swarm Optimization and Design of Experiments”, M.Sc. in Industrial Engineering, Cairo University, 2017. 10. Omnia Fadel Osman, “An Alternative to Monte Carlo Simulation via Orthogonal Arrays”, M.Sc. in Industrial Engineering, Port Said University, 2016. 11. David S. L. Shoukr, “The Reduced Tolerance Analysis and Synthesis Problem”, M.Sc. in Industrial Engineering, Cairo University, 2016. 12. Abdel Rahman Ali, Multi Objective Optimization Metrics – A Comparative Analysis", M.Sc. in Industrial Engineering, Cairo University, 2019. PRINCIPAL PUBLICATIONS IN LAST YEARS: INTERNATIONAL JOURNAL PAPERS 1. M.H. Gadallah and H.A.ElMaraghy, "A Concurrent Engineering Approach To Robust Product Design", International Journal of Concurrent Engineering: Research and Applications (CERA), 1993, Vol.1, pp. 237-251. After Ph.D. 2. Gadallah, M. and ElMaraghy, H.A., "A New Algorithm For Combinatorial Optimization: Application to Tolerance Synthesis with Optimum Process Selection", Geometric Design Tolerancing: Theories and Applications, Editor: Hoda A. El-Maraghy, Chapman and Hall, Chapter IV, pp. 265-281, 1998. 3. M.H. Gadallah and H.A. ElMaraghy, "A Statistical Optimization Approach to Robust Design", A Contributed chapter to Simultaneous Engineering: Theory and Methodology, Gordon and Breach, Roy, V., J.M. Usher and H.R. Parsaei (Editor), Chapter V, pp. 135-158, 1998. 6 4. Gadallah, M.H. “Tolerance Analysis and Optimization: Modelling Issues and Experimental Verification”, Transactions of NAMRI/SME XIXX (MSO1-296),2001. 5. Hazim El-Mounayri, Mohamed Gadallah, “Prediction of Forces In Ball End Milling Using RBF Neural Networks”, Transactions of NAMRI/SME XXX (MRO2-162), 2002, pp. 313-320. 6. Mohamed Gadallah, Hazim El-Mounayri, “Exhaustive Search Approximations in Design Optimization - An Algorithmic Implementation”, CSME Transactions, Vol. 26, no. 2, 2002, pp. 201-217 (Impact Factor 0.46). 7. Hazim El-Mounayri, Mohamed Gadallah, Jorge Bricino, “Enhanced Modeling and Optimization of Milling Using Hybrid Techniques”, CSME Transactions, Vol. 26, no. 2, 2002, pp. 179-199 (Impact Factor 0.46). 8. H. El-Mounayri, J. Briceno and M. Gadallah, “A New Artificial Neural Network Approach to Modeling Ball End Milling”, International Journal of Advanced Manufacturing Technology (IJAMT), 2003 (Impact Factor 1.779). 9. Mohamed H. Gadallah, Khaled A. Hamid, Keith Hekman, "Intelligent Process Modeling using Feed Forward Neural Networks”, International J. of Manufacturing Technology & Management (IJMTM), Vol. 19, Nos. ¾,2010, pp. 238-257. DOI: 10.1504/IJMTM.2010.031371 10. Mohamed H. Gadallah, Khaled A. Hamid, Keith Hekman, "Process Model Development & Validation using ANN", European J. of Industrial Engineering (EJIE), Vol. 3, No. 1, 2009, pp. 99-125. DOI: 10.1504/EJIE.2009.021586 (Impact Factor 1.34). 11. Mohamed H. Gadallah, "The General Optimization Problem using Surrogate Modeling: Computational Experience", International Journal of Industrial and Systems Engineering (IJISE), Vol. 8, No. 4, 2011, pp. 492519 (Impact Factor 1.53). 12. Mohamed H. Gadallah, Khaled A. Hamid, Keith Hekman, "Ïntelligent Process Modeling using Radial Basis Neural Networks", International Journal of Machining and Machinability of Materials, Vol. 8, No.1/2, 2010, pp. 177 197. DOI: 10.1504/IJMMM.2010.034495 (Impact Factor 0.45). 13. Mohamed H. Gadallah, “Modelling and Synthesis using Response Surface Methodology: A Comparative Study”, International J. Experimental Design and Process Optimization, Vol. 1, No. 2/3, 2009, pp. 202-239. DOI: 10.1504/IJEDPO.2009.030319 14. Mohamed H. Gadallah, “Computer Simulation based Optimization: Hybrid B. & B. and Orthogonal Array based Enumerations Algorithm”, International J. Mathematics in Operational Research (IJMOR), Vol. 2, No. 5, 2010 (Impact Factor 0.84). 15. Mohamed H. Gadallah, "Decision Models for Process Improvement using Combined Response Surface Modeling and Multi-Objective Optimization", International Journal of Industrial and Systems Engineering (IJISE), Vol. 7 no. 2, 2011, pp. 165-194. DOI: 10.1504/IJISE.2011.038565 (Impact Factor 1.53). 16. Mohamed H. Gadallah, "Process Re-Modeling using RSM and the Splitting Approach", International J. of Mechatronics and Manufacturing Systems (IJMMS), Vol. 3, No. 1/2, 2010, pp. 58-78. DOI: 10.1504/IJMMS.2010.029875 17. Mohamed H. Gadallah, “An Alternative to Monte Carlo Simulation Method”, International Journal of Experimental Design and Process Optimization (IJEDPO), Vol. 2, No. 2, 2011. 18. Mohamed H. Gadallah, “Least Sensitive Tolerance Allocation”, International Journal of Quality Engineering& Technology (IJQET), Vol. 2, no. 4, 2011, pp. 344-356 (Imapct Factor 0.44). 19. Mohamed H. Gadallah, “Tolerance Optimization Problem Using a Near-to-Global Optimum”, International Journal of Experimental Design and Process Optimization (IJEDPO), Vol. X, No. Y, 2012. 20. Mohamed H. Gadallah, Mohamed B. Ali, Ahmed M. Emam, “Particle Swarm Optimization: A Triggered Approach”, International Journal of Industrial and Systems Engineering (IJISE), 2014, Vol. 16, No. 1, pp. 1-29 (Impact Factor 1.53). 21. Hussein H. Abd El Aziz, Mohamed H. Gadallah, Amal K. Esawi, “Modeling and Optimization of Electric Discharge Machining (EDM) using Statistical Design”, Accepted for Publication, Manufacturing Review, 2015. 22. Mohamed H. Gadallah, Hany Abdou, “Modeling and Optimization of Laser Cutting Operations”, Manufacturing Review, Vol. 2, Issue 2, 2015. 23. Modeling and optimization of Electrical Discharge Machining (EDM) using statistical design Husein A. Hegab, Mohamed H. Gadallah, Amal K. Esawi, Manufacturing Rev. 2 21 (2015), DOI: 10.1051/mfreview/2015023 24. Omnia O. Fadel, Mohamed H. Gadallah, Mohamed A. Zaghloul, Hanan K. Kouta, “Tolerance Analysis Using Approximations and the Monte Carlo Method”, Submitted to Computers and Industrial Engineering, 2016. 25. David S. L. Shoukr, Mohamed H. Gadallah, Sayed M. Metwally, “Reduced Monte Carlo Simulation: Application to Tolerance Analysis”, Submitted to Computer Aided Design, 2017. 26. Abdel Rahman Ali, Mohamed H. Gadallah, Hesham Hegazi, “Multi-Objective Optimization Indices – A Comparative Analysis”, Australian J. of Basic and Applied Science, Vol. 10(15), 2016, pp. 10-25. 7 27. MAHMOUD F. Y. SHALABY, MOHAMED H. GADALLAH, ALAA ALMOKADEM, “OPTIMIZATION OF PRODUCTION, MAINTENANCE, AND INSPECTION DECISIONS UNDER RELIABILITY CONSTRAINTS”, Journal of Engineering Science and Technology, School of Engineering, Taylor University, Volume 14, Issue 6, 2019. INTERNATIONAL CONFERENCE REFEREED PAPERS 1. Gadallah M.H. and H.A. ElMaraghy "The Tolerance Optimization Problem Using A System Of Experimental Design", ASME Advances In Design Automation, DE-69(1),1994, pp. 251-265. 2. Gadallah M.H. and H.A. ElMaraghy "A New Algorithm for Combinatorial Optimization", ASME Advances In Design Automation, DE-82(1), 1995, pp. 447-454. 3. Gadallah, M.H. and H.A. ElMaraghy "Design For Robust Performance: A Concurrent Engineering Approach", 9th International Conference on CAD/CAM and Robotics, New Jersey, August 18-20,1993. 4. Gadallah, M.H. and H.A. ElMaraghy, H.A. "Strategies and Methodologies For Robust Process Design", The Canadian Society For Mechanical Engineering Forum, McGill University, June 20-22, 1994. 5. Gadallah, M.H. and ElMaraghy H.A., "A New Algorithm to Discrete Tolerance Optimization", 4th International Conference on CIM and Automation Technology, Troy New York, IEEE Computer Society Press, 1994, pp. 292-297. 6. Gadallah, M.H. and ElMaraghy, H.A. "A New Algorithm For form Tolerance Evaluation", the 4th International Conference on CIM and Automation Technology, Troy New York, IEEE Computer Society Press, 1994, pp. 286-291. 7. Gadallah, M.H. and ElMaraghy, H.A., "Design Synthesis Using Orthogonal Arrays and Decomposition Methods", The First World Congress On Intelligent manufacturing Systems and Processes, Mayaguez, Puerto Rico, February 13-17, 1995. 9. Gadallah, M.H. , "The Tolerance Optimization Problem using a Near-to-Global Optimum", ASME Design Automation Conference, Baltimore, Maryland, 2000 (paper # 14294.pdf). 10. Gadallah, M.H., “On The Heuristics of Discrete Optimization”, Accepted for Publication, ASME Design Automation Conference, Pittsburgh, Pennsylvania, 2001 (paper # 21059.pdf). 11. Gadallah, M.H., “Tolerance Optimization: Variance Reduction, Decomposition Scheme & Fractional Approximation”, ASME Design Automation Conference, Pittsburgh, Pennsylvania, 2001 (paper # 21222.pdf). 12. Gadallah, M.H., “Modeling for Optimization (MO - OP): Tools for Manufacturing and Design Engineering Problems”, ASME Design Automation Conference, Pittsburgh, Pennsylvania, 2001 (paper # 21223.pdf). 13. Gadallah, M.H. “ON MULTI-OBJECTIVE OPTIMIZATION PROBLEM: MODELING ISSUES & NUMERICAL VERIFICATION”, 34th International Conference on Computers & Industrial Engineering, San Francisco, USA, 2004. 14. Gadallah, M.H. “ROBUST DESIGN & OPTIMIZATION TECHNIQUES – A PRELIMINARY COMPARATIVE ANALYSIS”, 34th International Conference on Computers & Industrial Engineering, San Francisco, USA, 2004. 15. M.H. Gadallah, K. El-Sayed, K. Hekman, “Radial Basis Neural Network Models: Model Development and Validation”, Tehran International Congress on Manufacturing Engineering (TICME2005), Dec 12-15, 2005, Tehran, Iran. 16.Khaled A.H. El-Sayed, M.H. Gadallah, K. Hekman, “Artificial Neural Network Models Using Statistical Based Techniques”, Production Engineering & Design for Development, PEDD7, Cairo, Feb. 7-9, 2006. 17. Omnia O. Fadel, Mohamed H. Gadallah, Mohamed A. Zaghloul, Hanan Kouta, “Tolerance Analysis using an Alternative to Monte Carlo Simulation”, Proceedings of the 2016 International Conference on Industrial Engineering and Operations Management Kuala Lumpur, Malaysia, March 8-10, 2016. 18. Shoukr, David Sh. L., Gadallah, Mohamed H., and Metwalli, Sayed M. "The Reduced Tolerance Allocation Problem." Proceedings of the ASME 2016 International Mechanical Engineering Congress and Exposition. Volume 11: Systems, Design, and Complexity. Phoenix, Arizona, USA. November 11–17, 2016. V011T15A023. ASME. https://doi.org/10.1115/IMECE2016-65848 International Conferences and Professional Meetings 1. ASME Design Technical Engineering Conferences. 2. INFORMS Meeting and Conferences, San Antonio, USA, 2000. 3. 16th International Conference on Production Research ICPR-16, Praha, Czech Republic, July 29th, 2001. 4. 34th International Conference on Computers & Industrial Engineering, San Francisco, USA, 2004. 5. Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, 2005. 6. 7th International Conference on Production Engineering & Design for Development, PEDD7, Cairo, 2006. 7. 7th World Congress on Structural & Multi-Disciplinary Optimization, Seoul, Korea, 2007. 8. World Congress on Engineering, IAENG, London UK, 2009. 9. 2016 International Conference on Advances in Mechanical, Industrial and Mechatronics Engineering, August 25-26, 2016 Istanbul, Turkey. 8 10. ASME 2016 Int'l Mechanical Eng. Congress & Exposition, IMECE2016, Nov. 11-17, 2016, Phoenix, Arizona, USA. SCIENTIFIC AND PROFESSIONAL SOCIETIES:  ASME, CSME, IAENG. HONORS AND AWARDS: 1. Awarded Marquis Who’s Who in Science & Engineering, 2003-2004. 2. Awarded International Scientist of the Year, International Biographical Centre, England, 2004. 3. Awarded Who's Who in Higher Education, 2007. INSTITUTIONAL AND PROFESSIONAL SERVICE ACTIVITIES:  Refree for: 1. Journal of Optimization: Theory & Methodology. 2. ASME Design Engineering Technical Conferences. 3. Journal of Quality and Reliability Engineering International. 4. Transactions of the Canadian Society for Mechanical Engineering, CSME. 5. International Journal of Computers and Industrial Engineering. 6. ASME Journal of Mechanical Design. 7. Journal of Intelligent Manufacturing 8. Journal of Engineering Optimization. 9. Journal of Faculty of Engineering & Applied Science, Cairo University. 10. King Abdul Aziz International Engineering Journal. 11. Journal of Mechanical Engineering & Technology (JMET) 12. International J. of Industrial and Systems Engineering 13. International Journal of Process Management and Benchmarking (IJPMB) 14. Indian Journal of Science & Technology 15. Journal of Advanced Research, Cairo University 16. Journal of Engineering Research, Alexandria University 17. Journal of Engineering Science & Technology, Taylor’s University, Malaysia 18. The International Journal of Advanced Manufacturing Technology 19. Manufacturing Review  Associate Editor for CSME, 2003 – Current.  Editorial Board Member, Int. J. of Quality Engineering & Technology (IJQET) from 2012-2014.  ASME Manufacturing Science and Engineering Conferences.  Associate Editor for Journal of Collaborative Intelligent Manufacturing, 2020 – Current. PROFESSIONAL DEVELOPMENT:  Presented papers in Technical Conferences in USA since 1998.  Visiting Scholar, University of Indianapolis – Purdue, 2001.  Visiting Scholar, University of Illinois at Chicago, 2004.  Attended Teaching Effectiveness Workshops (Qatar U., 2007).  Attended Teaching and Research Effectiveness Workshops (Cairo U., 2009-2010).  Attended Accreditation Requirements Workshops (Cairo U., 2009-2010).  Member of Promotion Committee (Associate/ Full Professorship), 2010 - todate.  College of Engineering Coordinator for 5 th Student Scientific Conference, Prince Sultan University, Riyadh, KSA, 2013-2014.  College of Engineering University Curriculum Committee, Prince Sultan University, Riyadh, KSA, 2013-2014.  College of Engineering University Quality Assurance & Accreditation Committee, Riyadh, KSA, 2013-2014.  Faculty of Engineering, Cairo University Quality Assurance & Accreditation Committee, 2014-2015.  Attended Excellence in Engineering Teaching course, Ain Shams University, 2019. International Conferences and Professional Meetings 1. ASME Design Technical Engineering Conferences. 2. INFORMS Meeting and Conferences, San Antonio, USA, 2000. 9 3. 16th International Conference on Production Research ICPR-16, Praha, Czech Republic, July 29th, 2001. 4. 34th International Conference on Computers & Industrial Engineering, San Francisco, USA, 2004. 5. Tehran International Congress on Manufacturing Engineering (TICME2005), Tehran, Iran, 2005. 6. 7th International Conference on Production Engineering & Design for Development, PEDD7, Cairo, 2006. 7. 7th World Congress on Structural & Multi-Disciplinary Optimization, Seoul, Korea, 2007. 8. 2016 International Conference on Advances in Mechanical, Industrial and Mechatronics Engineering, August 25-26, 2016 Istanbul, Turkey. 9. ASME 2016 Int'l Mechanical Eng. Congress & Exposition, IMECE2016, Nov. 11-17, 2016, Phoenix, Arizona, USA. University Research Grants 1. “Manufacturing Process Modelling & Optimization: Applications to Machining Operations”, 2003. 2. “Robust Design & Optimization Techniques: A Comparative Study”, 2003. 3. “Multi-Objective Pareto Frontier Exploration Using Meta Modeling & Approximation”, October 2003. International Assessor 1. Promotion activities, Basrah University, School of Engineering & Technology, 2017. 2. Egypt Supreme University Council, Commiitee for Egypt Japan University for Science & Technology, 2017. 3. Egypt Supreme University Council, Commiitee for Alexandria University, 2017. Research Activities Binational Fulbright Commission Member in Selection Committee for Research/ Lecturing Program February 27, 2003 and January 30th, 2005. REFERENCES Professor Paul Zsombor-Murray, Editor, CSME Trans., Department of Mechanical Engineering McGill University Tel. +1 (514)398-6313 or -6311 Fax +1 (514)398-5256 or -7348 [email protected] Professor Angappa "Guna" Gunasekaran, Chairperson, Department of Decision and Information Sciences Charlton College of Business, University of Massachusetts - Dartmouth 285 Old Westport Road, North Dartmouth, MA 02747-2300, USA. Tel: (508) 999-9187; Fax: (508) 999-8646; E-mail: [email protected] Director, Business Innovation Research Center (BIRC) Dr S. Eren Semercigil, Senior Lecturer Victoria University School of Architectural, Civil and Mechanical Engineering Footscray Campus, PO Box 14428, MCMC, Melbourne, Victoria 8001, AUSTRALIA Tel (O) : 61 3 9919 4009 Fax (O) : 61 3 9919 4139 E-mail : [email protected] Dr. Osama Badr, Professor and Head, Mechanical Engineering Department, French University in Egypt, Al-Shorouk City, Egypt Tel. +202- 2689-0000 Ext. 1434 Work Email: [email protected], [email protected]; Mobile: +201062338018 Dr. Mohammad S. Obaidat, Chair and Professor Department of Computer and Information Science Fordham University 441 East Fordham Road, JMH 340 Bronx, New York 10458 10 E-mail: [email protected]; [email protected] http:///www.theobaidat.com http://www.cis.fordham.edu/faculty/Mohammad-Obaidat.html Professer Mahmoud Farag, Professor of Mechanical Engineering Director of Engineering and Science Services Senior Faculty at the Science and Technology Research Center The American University in Cairo (AUC) Tel 2615.3068 E-Mail: [email protected] Professor Mohamed Amr Serag El-Din, Department of Mechanical Engineering The American University in Cairo (AUC), 113 Kasr El-Aini Street, P.O. Box 2511, Cairo 11511 Phone: 202-7975324 Fax: 202-7957565 (mailbox 355) E-Mail: [email protected] Professor Salah El Haggar, Chairman Department of Mechanical Engineering The American University in Cairo (AUC) Tel 2615.3065 [email protected] 11