Papers by Gianfranco Rodriguez
The last decades marked a period of growth and prosperity in construction industry which involves... more The last decades marked a period of growth and prosperity in construction industry which involves the use of natural resources. This growth is jeopardized by the lack of natural resources that are available. On the other hand there has been rapid increase in the industrial waste production. Most of the waste do not find any effective use and cause a waste disposal crisis, thereby contributing to health and environmental problems. Recycling of industrial waste as aggregate is thus a logical option to manage this problem. The paper reports on some experimental results obtained from the production of concretes containing granulated slag of lead and zinc industry as sand replacement mixed in different proportions. Granulated slag is substituted for raw sand, partly or totally. Ratios of 25%, 50%, 75% and 100% by weight of sand are used.The effects of granulated lead-zinc slag (GLZS) as sand replacement material on the compressive strength and gamma radiation attenuation properties of concrete are investigated and analyzed. Then, these properties are compared with those of ordinary concrete. The results showed that replacement material have some effects on the compressive strength and gamma radiation properties of the concrete.The experimental results indicate that, the concrete mixed with GLZS as a sand replacement have better strength. Concerning the absorption properties for gamma radiation the data show that the addition of GLZS resulted in an increase of the attenuation of gamma radiation. Consequently, these concretes could be used for construction of shields protecting personnel who work in laboratories where radiation is used. Additionally, the thickness of the concrete with GLZS was calculated and compared with ordinary concrete.
ÍNDICE página ÍNDICE PREFACIO 111 INTRODUCCIÓN ṽ 12 6.4 AMBIENTE DE TRABAJO 12 .~-7. REALIZACIÓN ... more ÍNDICE página ÍNDICE PREFACIO 111 INTRODUCCIÓN ṽ 12 6.4 AMBIENTE DE TRABAJO 12 .~-7. REALIZACIÓN DEL PRODUCTO 13 7.1 PLANIFICACIÓN DE LA REALIZACIÓN DEL PRODUCTO 13 7.2 PROCESOS RELACIONADOS CON EL CLIENTE 14 7.3 DISEÑO Y DESARkOLLO 15 7.4 COMPRAS 18 7.5 PRODUCCIÓN Y PRESTACIÓN DEL SERVICIO 20 7.6
Uploads
Papers by Gianfranco Rodriguez