Biodiesel production waste cooking oil is usually limited by its high free fatty acid and moistur... more Biodiesel production waste cooking oil is usually limited by its high free fatty acid and moisture content. The synergetic effect of both base and acid source from biomass was employed to proffer way out to this challenge. This study shows the coupled development of sulfonated carbonized corn cob (S-CCC) and calcined cow-bone (C-CB) catalysts for transesterification of waste cooking oil. The catalyst was prepared by physically mixing several mass percentages of S-CCC and C-CB (fluorapatite) in strategic proportions. The maximum biodiesel yield of 96.2 % was attained for catalyst mixture of 60 wt% and 40 wt%. The developed catalyst mixture was characterized by Fourier Transform Infrared Ray (FTIR), powder X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Brunauer–Emmett-Teller (BET). The surface area (472.3 m2/g), pore size (2.4330 nm) and volume (0.1380 cc/g) were obtained for the catalyst. The XRD shows that the crystallized structure of th...
Biodiesel properties are in general attributed to the composition and properties of the oil feeds... more Biodiesel properties are in general attributed to the composition and properties of the oil feedstock used, overlooking the possible impacts of the catalyst preparation details. In light of that, the impacts of different catalyst preparation techniques alongside those of different support materials on the yield, composition, and fuel properties of biodiesels produced from the same oil feedstock were investigated. More specifically, tri-metallic (Fe-Co-Ni) catalyst was synthesized through two different techniques (green synthesis and wet impregnation) using MgO or ZnO as support material. The generated catalyst pairs, i.e., Fe-Co-Ni/MgO and Fe-Co-Ni/ZnO prepared by wet impregnation and Fe-Co-Ni-MgO and Fe-Co-Ni-ZnO prepared by green synthesis (using leaf extracts) were used in the transesterification process of Jatropha curcas oil. Detailed morphological properties, composition, thermal stability, crystalline nature, and functional groups characterization of the catalysts were also carried out. Using Box-Behnken Design response surface methodology, it was found that the green-synthesized Fe-Co-Ni-MgO catalyst resulted in the highest biodiesel yield of 97.9%. More importantly, the fatty acid methyl ester (FAME) profiles of the biodiesels produced using the four catalysts as well as their respective fuel properties were different in spite of using the same oil feedstock.
Mixed solid oxides are known for their excellent catalytic property and applications in environme... more Mixed solid oxides are known for their excellent catalytic property and applications in environmental remediation. This study presents a green-synthesis route for magnesium oxide–titanium oxide, a mixed oxide here demonstrated to possess high performance of phenol removal from hydrocarbon refinery process wastewater. Mixed oxide (MgO-TiO2) was prepared by using the whole extract from leaves of Piliostigma Thonningii as reducing agent. A structural attribute of the mixed oxide was investigated using X-ray Diffractometer, High-Resolution Scanning Electronic Microscopy and Energy Dispersive X-ray. Petroleum refinery raw wastewater having phenol concentration of 19.961 mg/L was treated using the green-synthesized mixed oxide. Adsorptive phenols removal up to 99.5% was achieved with a dosage of 0.04 g/100 mL at temperature of 35 °C, and contact time of 1.167 h. By this, the treated water meets the standard acceptable phenol concentration (0.1 mg/L) in wastewater of hydrocarbon refinery.
Biodiesel production waste cooking oil is usually limited by its high free fatty acid and moistur... more Biodiesel production waste cooking oil is usually limited by its high free fatty acid and moisture content. The synergetic effect of both base and acid source from biomass was employed to proffer way out to this challenge. This study shows the coupled development of sulfonated carbonized corn cob (S-CCC) and calcined cow-bone (C-CB) catalysts for transesterification of waste cooking oil. The catalyst was prepared by physically mixing several mass percentages of S-CCC and C-CB (fluorapatite) in strategic proportions. The maximum biodiesel yield of 96.2 % was attained for catalyst mixture of 60 wt% and 40 wt%. The developed catalyst mixture was characterized by Fourier Transform Infrared Ray (FTIR), powder X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), Energy Dispersive X-ray (EDX), Brunauer–Emmett-Teller (BET). The surface area (472.3 m2/g), pore size (2.4330 nm) and volume (0.1380 cc/g) were obtained for the catalyst. The XRD shows that the crystallized structure of th...
Biodiesel properties are in general attributed to the composition and properties of the oil feeds... more Biodiesel properties are in general attributed to the composition and properties of the oil feedstock used, overlooking the possible impacts of the catalyst preparation details. In light of that, the impacts of different catalyst preparation techniques alongside those of different support materials on the yield, composition, and fuel properties of biodiesels produced from the same oil feedstock were investigated. More specifically, tri-metallic (Fe-Co-Ni) catalyst was synthesized through two different techniques (green synthesis and wet impregnation) using MgO or ZnO as support material. The generated catalyst pairs, i.e., Fe-Co-Ni/MgO and Fe-Co-Ni/ZnO prepared by wet impregnation and Fe-Co-Ni-MgO and Fe-Co-Ni-ZnO prepared by green synthesis (using leaf extracts) were used in the transesterification process of Jatropha curcas oil. Detailed morphological properties, composition, thermal stability, crystalline nature, and functional groups characterization of the catalysts were also carried out. Using Box-Behnken Design response surface methodology, it was found that the green-synthesized Fe-Co-Ni-MgO catalyst resulted in the highest biodiesel yield of 97.9%. More importantly, the fatty acid methyl ester (FAME) profiles of the biodiesels produced using the four catalysts as well as their respective fuel properties were different in spite of using the same oil feedstock.
Mixed solid oxides are known for their excellent catalytic property and applications in environme... more Mixed solid oxides are known for their excellent catalytic property and applications in environmental remediation. This study presents a green-synthesis route for magnesium oxide–titanium oxide, a mixed oxide here demonstrated to possess high performance of phenol removal from hydrocarbon refinery process wastewater. Mixed oxide (MgO-TiO2) was prepared by using the whole extract from leaves of Piliostigma Thonningii as reducing agent. A structural attribute of the mixed oxide was investigated using X-ray Diffractometer, High-Resolution Scanning Electronic Microscopy and Energy Dispersive X-ray. Petroleum refinery raw wastewater having phenol concentration of 19.961 mg/L was treated using the green-synthesized mixed oxide. Adsorptive phenols removal up to 99.5% was achieved with a dosage of 0.04 g/100 mL at temperature of 35 °C, and contact time of 1.167 h. By this, the treated water meets the standard acceptable phenol concentration (0.1 mg/L) in wastewater of hydrocarbon refinery.
Uploads
Papers by harvis Saka