Yasser Khan

Follower

Following

Public Views

I am an engineer/maker/scientist working on multi-disciplinary projects at the intersection of engineering,materials science, biology, and artificial intelligence. Currently, I am creating new sensing paradigms forwearable health and mental health monitoring with skin-like bioelectronic and biophotonic sensor systems.

less

Abd Rahman Ahlan

International Islamic University Malaysia

reem okab

Al-Balqa Applied University

Raghu Vamsi Potukuchi

Jaypee Institute of Information Technology

Devasena A.

Dhanalakshmi College Of Engineering

N Sriraam

M.S.Ramaiah Institute of Technology

Akash Bhoi

Kiet

Gearóid ÓLaighin

University of Galway

Manoharan K.

Svs College Of Engineering

Dr. S. VELMURUGAN M.E., Ph.D.,

Anna University

Ashok Bekkanti

K L University

Interests

Uploads

Papers by Yasser Khan

A wearable biosensing system with in-sensor adaptive machine learning for hand gesture recognition

Nature Electronics

Flexible, Fringe‐Effect Capacitive Sensors with Simultaneous High‐Performance Contact and Non‐Contact Sensing Capabilities

Small Structures

Pulse Oximetry Using Organic Optoelectronics under Ambient Light

Advanced Materials Technologies

Large‐Area Fabrication of High‐Performance Flexible and Wearable Pressure Sensors

Advanced Electronic Materials

A New Frontier of Printed Electronics: Flexible Hybrid Electronics

Advanced Materials

Reliability Challenges in Fabrication of Flexible Hybrid Electronics for Human Performance Monitors: A System Level Study

IEEE Transactions on Components, Packaging and Manufacturing Technology

Organic Multi-Channel Optoelectronic Sensors for Wearable Health Monitoring

IEEE Access

Recent progress in printed optoelectronics and their integration in wearable sensors have created... more Recent progress in printed optoelectronics and their integration in wearable sensors have created new avenues for research in reflectance photoplethysmography (PPG) and oximetry. The reflectionmode sensor, which consists of light emitters and detectors, is a vital component of reflectance oximeters. Here, we report a systematic study of the reflectance oximeter sensor design in terms of component geometry, light emitter and detector spacing, and the use of an optical barrier between the emitter and the detector to maximize sensor performance. Printed red and near-infrared (NIR) organic light-emitting diodes (OLEDs) and organic photodiodes (OPDs) are used to design three sensor geometries: (1) Rectangular geometry, where square OLEDs are placed at each side of the OPD; (2) Bracket geometry, where the OLEDs are shaped as brackets and placed around the square OPD; (3) Circular geometry, where the OLEDs are shaped as block arcs and placed around the circular OPD. Utilizing the bracket geometry, we observe 39.7% and 18.2% improvement in PPG signal magnitude in the red and NIR channels compared to the rectangular geometry, respectively. Using the circular geometry, we observe 48.6% and 9.2% improvements in the red and NIR channels compared to the rectangular geometry. Furthermore, a wearable two-channel PPG sensor is utilized to add redundancy to the measurement. Finally, inverse-variance weighting and template matching algorithms are implemented to improve the detection of heart rate from the multi-channel PPG signals.

Download

Local electrochemical control of hydrogel microactuators in microfluidics

Journal of Micromechanics and Microengineering

Emission Area Patterning of Organic Light-Emitting Diodes (OLEDs) via Printed Dielectrics

Advanced Functional Materials

A flexible organic reflectance oximeter array

Proceedings of the National Academy of Sciences

Transmission-mode pulse oximetry, the optical method for determining oxygen saturation in blood, ... more Transmission-mode pulse oximetry, the optical method for determining oxygen saturation in blood, is limited to only tissues that can be transilluminated, such as the earlobes and the fingers. The existing sensor configuration provides only single-point measurements, lacking 2D oxygenation mapping capability. Here, we demonstrate a flexible and printed sensor array composed of organic light-emitting diodes and organic photodiodes, which senses reflected light from tissue to determine the oxygen saturation. We use the reflectance oximeter array beyond the conventional sensing locations. The sensor is implemented to measure oxygen saturation on the forehead with 1.1% mean error and to create 2D oxygenation maps of adult forearms under pressure-cuff–induced ischemia. In addition, we present mathematical models to determine oxygenation in the presence and absence of a pulsatile arterial blood signal. The mechanical flexibility, 2D oxygenation mapping capability, and the ability to place ...

Download

Flexible Blade-Coated Multicolor Polymer Light-Emitting Diodes for Optoelectronic Sensors

Advanced materials (Deerfield Beach, Fla.), Jan 10, 2017

A method to print two materials of different functionality during the same printing step is prese... more A method to print two materials of different functionality during the same printing step is presented. In printed electronics, devices are built layer by layer and conventionally only one type of material is deposited in one pass. Here, the challenges involving printing of two emissive materials to form polymer light-emitting diodes (PLEDs) that emit light of different wavelengths without any significant changes in the device characteristics are described. The surface-energy-patterning technique is utilized to print materials in regions of interest. This technique proves beneficial in reducing the amount of ink used during blade coating and improving the reproducibility of printed films. A variety of colors (green, red, and near-infrared) are demonstrated and characterized. This is the first known attempt to print multiple materials by blade coating. These devices are further used in conjunction with a commercially available photodiode to perform blood oxygenation measurements on th...

Download

Flexible Hybrid Electronics: Direct Interfacing of Soft and Hard Electronics for Wearable Health Monitoring

Advanced Functional Materials, 2016

The interfacing of soft and hard electronics is a key challenge for flexible hybrid electronics. ... more The interfacing of soft and hard electronics is a key challenge for flexible hybrid electronics. Currently, a multisubstrate approach is employed, where soft and hard devices are fabricated or assembled on separate substrates, and bonded or interfaced using connectors; this hinders the flexibility of the device and is prone to interconnect issues. Here, a single substrate interfacing approach is reported, where soft devices, i.e., sensors, are directly printed on Kapton polyimide substrates that are widely used for fabricating flexible printed circuit boards (FPCBs). Utilizing a process flow compatible with the FPCB assembly process, a wearable sensor patch is fabricated composed of inkjet-printed gold electrocardiography (ECG) electrodes and a stencil-printed nickel oxide thermistor. The ECG electrodes provide 1 mVp–p ECG signal at 4.7 cm electrode spacing and the thermistor is highly sensitive at normal body temperatures, and demonstrates temperature coefficient, α ≈ –5.84% K–1 and material constant, β ≈ 4330 K. This sensor platform can be extended to a more sophisticated multisensor platform where sensors fabricated using solution processable functional inks can be interfaced to hard electronics for health and performance monitoring, as well as internet of things applications.

High-performance flexible energy storage and harvesting system for wearable electronics

Scientific Reports, 2016

This paper reports on the design and operation of a flexible power source integrating a lithium i... more This paper reports on the design and operation of a flexible power source integrating a lithium ion battery and amorphous silicon solar module, optimized to supply power to a wearable health monitoring device. The battery consists of printed anode and cathode layers based on graphite and lithium cobalt oxide, respectively, on thin flexible current collectors. It displays energy density of 6.98 mWh/cm 2 and demonstrates capacity retention of 90% at 3C discharge rate and ~99% under 100 charge/discharge cycles and 600 cycles of mechanical flexing. A solar module with appropriate voltage and dimensions is used to charge the battery under both full sun and indoor illumination conditions, and the addition of the solar module is shown to extend the battery lifetime between charging cycles while powering a load. Furthermore, we show that by selecting the appropriate load duty cycle, the average load current can be matched to the solar module current and the battery can be maintained at a constant state of charge. Finally, the battery is used to power a pulse oximeter, demonstrating its effectiveness as a power source for wearable medical devices.

Download

Bioelectronic Interfaces: Inkjet-Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces (Adv. Funct. Mater. 7/2016)

Advanced Functional Materials, 2016

Inkjet-Printed Flexible Gold Electrode Arrays for Bioelectronic Interfaces

Advanced Functional Materials, 2015

Bioelectronic interfaces require electrodes that are mechanically flexible and chemically inert. ... more Bioelectronic interfaces require electrodes that are mechanically flexible and chemically inert. Flexibility allows pristine electrode contact to skin and tissue, and chemical inertness prevents electrodes from reacting with biological fluids and living tissues. Therefore, flexible gold electrodes are ideal for bioimpedance and biopotential measurements such as bioimpedance tomography, electrocardiography (ECG), electroencephalography (EEG), and electromyography (EMG). However, a manufacturing process to fabricate gold electrode arrays on plastic substrates is still elusive. In this work, a fabrication and low-temperature sintering (≈200 °C) technique is demonstrated to fabricate gold electrodes. At low-temperature sintering conditions, lines of different widths demonstrate different sintering speeds. Therefore, the sintering condition is targeted toward the widest feature in the design layout. Manufactured electrodes show minimum feature size of 62 μm and conductivity values of 5 × 10 6 S m−1. Utilizing the versatility of printing and plastic electronic processes, electrode arrays consisting of 31 electrodes with electrode-to-electrode spacing ranging from 2 to 7 mm are fabricated and used for impedance mapping of conformal surfaces at 15 kHz. Overall, the fabrication process of an inkjet-printed gold electrode array that is electrically reproducible, mechanically robust, and promising for bioimpedance and biopotential measurements is demonstrated.

Monitoring of Vital Signs with Flexible and Wearable Medical Devices

Advanced materials (Deerfield Beach, Fla.), Jan 12, 2016

Advances in wireless technologies, low-power electronics, the internet of things, and in the doma... more Advances in wireless technologies, low-power electronics, the internet of things, and in the domain of connected health are driving innovations in wearable medical devices at a tremendous pace. Wearable sensor systems composed of flexible and stretchable materials have the potential to better interface to the human skin, whereas silicon-based electronics are extremely efficient in sensor data processing and transmission. Therefore, flexible and stretchable sensors combined with low-power silicon-based electronics are a viable and efficient approach for medical monitoring. Flexible medical devices designed for monitoring human vital signs, such as body temperature, heart rate, respiration rate, blood pressure, pulse oxygenation, and blood glucose have applications in both fitness monitoring and medical diagnostics. As a review of the latest development in flexible and wearable human vitals sensors, the essential components required for vitals sensors are outlined and discussed here, ...

Identifying orthogonal solvents for solution processed organic transistors

Organic Electronics, 2016

Identification of solvents for dissolving polymer dielectrics and organic semiconductors is neces... more Identification of solvents for dissolving polymer dielectrics and organic semiconductors is necessary for the fabrication of solution-processed organic field effect transistors (OFETs). In addition to solubility and printability of a solvent, orthogonality is particularly important when forming multilayer structure from solutions. Currently, the process of finding orthogonal solvents is empirical, and based on trial-and-error experimental methods. In this paper, we present a methodology for identifying orthogonal solvents for solution-processed organic devices. We study the accuracy of Hildebrand and Hansen solubility theories for building solubility boundaries for organic semiconductor (Poly(2,5-bis(3-hexadecylthiophen-2yl)thieno[3,2-b]thiophene (PBTTT) and polymer dielectrics (Poly(methyl methacrylate) (PMMA), Polystyrene (PS)). The Hansen solubility sphere for the organic semiconductor and polymer gate dielectrics are analyzed to identify solvents that dissolve PMMA and PS, but are orthogonal to PBTTT. Top gate/bottom contact PBTTT based OFETs are fabricated with PMMA gate dielectric processed with solvents that are orthogonal and non-orthogonal to PBTTT. The non-orthogonal solvents swell the semiconductor layer and increase their surface roughness.

Download

Impedance sensing device for monitoring ulcer healing in human patients

2015 37th Annual International Conference of the IEEE Engineering in Medicine and Biology Society (EMBC), 2015

Chronic skin wounds affect millions of people each year and take billions of dollars to treat. Ul... more Chronic skin wounds affect millions of people each year and take billions of dollars to treat. Ulcers are a type of chronic skin wound that can be especially painful for patients and are tricky to treat because current monitoring solutions are subjective. We have developed an impedance sensing tool to objectively monitor the progression of healing in ulcers, and have begun a clinical trial to evaluate the safety and feasibility of our device to map damaged regions of skin. Impedance data has been collected on five patients with ulcers, and impedance was found to correlate with tissue health. A damage threshold was applied to effectively identify certain regions of skin as &amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;damaged tissue&amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;amp;quot;.

System design for organic pulse oximeter

2015 6th International Workshop on Advances in Sensors and Interfaces (IWASI), 2015

Impedance sensing device enables early detection of pressure ulcers in vivo

Nature Communications, 2015

When pressure is applied to a localized area of the body for an extended time, the resulting loss... more When pressure is applied to a localized area of the body for an extended time, the resulting loss of blood flow and subsequent reperfusion to the tissue causes cell death and a pressure ulcer develops. Preventing pressure ulcers is challenging because the combination of pressure and time that results in tissue damage varies widely between patients, and the underlying damage is often severe by the time a surface wound becomes visible. Currently, no method exists to detect early tissue damage and enable intervention. Here we demonstrate a flexible, electronic device that non-invasively maps pressure-induced tissue damage, even when such damage cannot be visually observed. Using impedance spectroscopy across flexible electrode arrays in vivo on a rat model, we find that impedance is robustly correlated with tissue health across multiple animals and wound types. Our results demonstrate the feasibility of an automated, non-invasive 'smart bandage' for early detection of pressure ulcers.

Download

A wearable biosensing system with in-sensor adaptive machine learning for hand gesture recognition

Nature Electronics

Flexible, Fringe‐Effect Capacitive Sensors with Simultaneous High‐Performance Contact and Non‐Contact Sensing Capabilities

Small Structures

Pulse Oximetry Using Organic Optoelectronics under Ambient Light

Advanced Materials Technologies

Large‐Area Fabrication of High‐Performance Flexible and Wearable Pressure Sensors

Advanced Electronic Materials

A New Frontier of Printed Electronics: Flexible Hybrid Electronics

Advanced Materials

Reliability Challenges in Fabrication of Flexible Hybrid Electronics for Human Performance Monitors: A System Level Study