HAL (Le Centre pour la Communication Scientifique Directe), Sep 1, 2018
The use of DC transmission is particularly advantageous for long-distance transmission and interc... more The use of DC transmission is particularly advantageous for long-distance transmission and interconnection of asynchronous AC networks. Several converter topologies can be used for HVDC. Multilevel Modular Converters (MMCs) are the most favored given their technological advantages over other converters topologies. Due to their industrial maturity, they have become essential for all AC / DC conversion. So far, they have always been studied with a voltage source on DC side. However, when the converter is equipped with DC breaker, a series inductor is associated to limit current variations. This has consequences in term of modeling and control determination. This article aims to propose a modification of the control law in order to take into account this inductor. To facilitate the control organization, the Energetic Macroscopic Representation (EMR) is used. Modeling and Control of the Modular Multilevel Converter connected to an inductive DC source using Energetic Macroscopic Representation QORIA Taoufik EPE'18 ECCE Europe
The inner cascaded structure-based grid-forming control is a typical solution used to impose an A... more The inner cascaded structure-based grid-forming control is a typical solution used to impose an AC voltage magnitude across the output filters of the power inverters. Yet, because of the limited inverter's bandwidth resulting from the low-switching frequencies in transmission systems, the interaction (i.e., coupling) between control loops is highly likely making the understanding of the system behavior complex and its simplification unaffordable and may also lead to instabilities. The novelty of this paper consists in proposing a simple open-loop direct voltage control to reduce the number of the inner control regulators, and thereby guaranteeing a decoupling between the inner and outer control layers as well as increasing the system stability margin. This statement is well supported with a smallsignal analysis and progressive order model reduction of the system. The overall concept is validated in a 10-bus grid case while comparing the EMT and Phasor-based simulations. The practical feasibility of the control itself is experimentally proved with different test cases.
HAL (Le Centre pour la Communication Scientifique Directe), Jun 23, 2019
In the near future, power converters will be massively introduced in transmission grids due to re... more In the near future, power converters will be massively introduced in transmission grids due to renewable energy sources and high voltage direct current (HVDC) increase. Voltage Source Converter (VSC) control laws assume that Synchronous Generators (SGs) build a stiff AC voltage which allows the synchronization of converters. This is one of the major reasons that limit the high integration of currentsource converters in transmission grid. This constraint is no longer relevant when power converters operate as a voltage source based on the grid-forming concept. This concept uses an inner cascaded PI controllers in order to regulate the output AC voltage. However, it is difficult to tune its controller parameters for stable operation in grid-connected mode. This paper proposes an alternative state-feedback control with integral compensator based linear quadratic regulation (LQR) in order to ensure a stable operation and to get a better AC voltage transient and good decoupling between reactive and active power. The proposed control will be fully analyzed and compared to conventional methods.
HAL (Le Centre pour la Communication Scientifique Directe), Jul 3, 2018
RESUME-L'utilisation de la transmission DC est particulièrement avantageuse pour la transmission ... more RESUME-L'utilisation de la transmission DC est particulièrement avantageuse pour la transmission à longue distance et l'interconnexion des réseaux AC asynchrones. Plusieurs topologies de convertisseur peuvent être utilisées pour le HVDC. Les convertisseurs modulaires multiniveaux (MMC) sont les plus favorisés étant donné leurs avantages technologiques par rapport aux autres topologies de convertisseurs. Du fait de leur maturité industrielle, ils se sont imposés maintenant pour tous les convertisseurs AC/DC à transistors de forte puissance. Jusqu'ici, ils ont toujours été étudiés avec une source de tension côté DC. Or, lorsqu'ils sont équipés de DC breaker, on associe une inductance en série pour limiter les variations de courant. Ceci a des conséquences en terme de modélisation puis de détermination de la commande. Cet article a pour objectif de proposer une modification de commande afin de prendre en compte cette inductance.
Because of the throng of control strategies based Voltage Source Converters (VSC) recently propos... more Because of the throng of control strategies based Voltage Source Converters (VSC) recently proposed in the literature; their classification and characterization are becoming a trending topic. The high similarities of the proposed control strategies may lead to confusions and a misunderstanding of vocabulary. Therefore, this paper seeks first to highlight the possible features fulfilled by power converters in a large power system. The combination of these features is used to classify power converters. Furthermore, power converters can be seen by a power transmission system operators as black boxes, and they may have the same inputs and outputs, which makes their characterizations more difficult. This paper looks to show that only the fundamental nature of the source has an influence on the system dynamic behavior, thus, power converter can be characterized from their transient behavior in response to grid disturbances.
This paper consists first in comparing the well-known virtual impedance and current saturation al... more This paper consists first in comparing the well-known virtual impedance and current saturation algorithms in case of a three-phase short circuit. During the fault, the virtual impedance has an indirect action on the AC current since it depends mainly on the AC voltage controllers dynamics, whereas, the current saturation algorithm has a direct action on the AC current. Thus, a first study consists in comparing the dynamic behavior of the AC current for both methods separately. Once the fault is cleared, the grid-forming converter should be able to resynchronize to the main grid. In this paper, the impact of each current limiting algorithm on the transient stability is highlighted. Based on this comparative approach between the virtual impedance and the current saturation algorithms, a hybrid current limiting control is proposed to benefit the advantages of each algorithm in terms of current limitation and transient stability. To show the effectiveness of the proposed control, timedomain simulations and experimental test cases have been performed.
Le développement rapide de la production d'énergie renouvelable intermittente et des liaisons... more Le développement rapide de la production d'énergie renouvelable intermittente et des liaisons HVDC entraîne une augmentation importante du taux de pénétration des convertisseurs statiques dans les réseaux de transport. Aujourd'hui, les convertisseurs statiques ont pour fonction principale d'injecter une puissance dans le réseau tout en s'appuyant sur des machines synchrones qui garantissent tous les besoins du système électrique. Ce mode de fonctionnement est appelé «Grid-following». Les convertisseurs contrôlés en Grid-following ont plusieurs limitations: leur incapacité à fonctionner en mode autonome, leurs problèmes de stabilité dans des réseaux faibles et en cas de défaut ainsi que leur effet négatif sur l'inertie équivalent du système. Pour relever ces défis, le contrôle en Grid-forming est une bonne solution pour répondre aux besoins du système électrique et permettre un fonctionnement stable et sûr du système même avec un taux de pénétration des convertisseurs statique de 100%. Tout d'abord, trois stratégies de contrôle en Grid-forming sont proposées pour garantir quatre fonctionnalités principales: contrôle de tension, contrôle de puissance, émulation d'inertie et le support de la fréquence. La dynamique et la robustesse du système basées sur chaque contrôle ont été analysées et discutées. Ensuite, selon la topologie du convertisseur, la connexion avec le réseau AC peut nécessiter des filtres et des boucles de contrôle supplémentaires. Dans le cadre de cette thèse, deux topologies de convertisseur ont été envisagées (VSC à 2-niveaux et VSC-MMC) et l'implémentation associée à chacune a été discutée. Enfin, les questions de la protection des convertisseurs Grid-forming contre les surintensités et leur synchronisation post-défaut ont été étudiées, puis, des algorithmes de limitation de courant et de resynchronisation ont été proposés pour améliorer la stabilité transitoire du système. Un banc d'essai a été développé pour confirmer les approches théoriques proposées.The rapid development of intermittent renewable generation and HVDC links yields an important increase of the penetration rate of power electronic converters in the transmission systems. Today, power converters have the main function of injecting power into the main grid, while relying on synchronous machines that guaranty all system needs. This operation mode of power converters is called "Grid-following". Grid-following converters have several limitations: their inability to operate in a standalone mode, their stability issues under weak-grids and faulty conditions and their negative side effect on the system inertia.To meet these challenges, the grid-forming control is a good solution to respond to the system needs and allow a stable and safe operation of power system with high penetration rate of power electronic converters, up to a 100%. Firstly, three grid-forming control strategies are proposed to guarantee four main features: voltage control, power control, inertia emulation and frequency support. The system dynamics and robustness based on each control have been analyzed and discussed. Then, depending on the converter topology, the connection with the AC grid may require additional filters and control loops. In this thesis, two converter topologies have been considered (2-Level VSC and VSC-MMC) and the implementation associated with each one has been discussed. Finally, the questions of the grid-forming converters protection against overcurrent and their post-fault synchronization have been investigated, and then a hybrid current limitation and resynchronization algorithms have been proposed to enhance the transient stability of the system. At the end, an experimental test bench has been developed to confirm the theoretical approach
From the origin of the grid, energy has been delivered to electrical loads mainly by synchronous ... more From the origin of the grid, energy has been delivered to electrical loads mainly by synchronous machines. All the main rules to manage the grid have been based on the electromechanical behavior of these machines which have been extensively studied for many years. Due to the increase of HVDC link and renewable energy sources as wind turbine and PV, power converters are massively introduced in the grid with a fundamentally different dynamic behavior. Some years ago, they were connected as simple power injector. Then, they were asked to provide some ancillary services to the grid, in the future, grid forming capability will be required. Even if gridforming converters had been extensively studied for microgrids and offshore grids, it has to be adapted to transmission grid where the topology may be largely modified. This paper presents an algorithm for calculating the controller parameters of a gridforming converter which guarantee a stable behavior for many different configurations of the grid.
Grid-forming inverters usually use inner cascaded controllers to regulate output AC voltage and c... more Grid-forming inverters usually use inner cascaded controllers to regulate output AC voltage and converter output current. However, at the power transmission system level where the power inverter bandwidth is limited, i.e., low switching frequency, it is difficult to tune controller parameters to achieve the desired performances because of control loop interactions. In this paper, a direct AC voltage control-based state-feedback control is applied. Its control gains are tuned using a linear quadratic regulator. In addition, a sensitivity analysis is proposed to choose the right cost factors that allow the system to achieve the imposed specifications. Conventionally, a system based on direct AC voltage control has no restriction on the inverter current. Hence, in this paper, a threshold virtual impedance has been added to the state-feedback control in order to protect the inverter against overcurrent. The robustness of the proposed control is assessed for different short-circuit ratios using smallsignal stability analysis. Then, it is checked in different grid topologies using time domain simulations. An experimental test bench is developed in order to validate the proposed control.
HAL (Le Centre pour la Communication Scientifique Directe), Dec 12, 2019
The present paper deals with the post-fault synchronization of a voltage source converter based o... more The present paper deals with the post-fault synchronization of a voltage source converter based on the droop control. In case of large disturbances on the grid, the current is limited via current limitation algorithms such as the virtual impedance. During the fault, the power converter internal frequency deviates resulting in a converter angle divergence. Thereby, the system may lose the synchronism after fault clearing and which may lead to instability. Hence, this paper proposes a theoretical approach to explain the dynamic behavior of the grid forming converter subject to a three phase bolted fault. A literal expression of the critical clearing time is defined. Due to the precise analysis of the phenomenon, a simple algorithm can be derived to enhance the transient stability. It is based on adaptive gain included in the droop control. These objectives have been achieved with no external information and without switching from one control to the other. To prove the effectiveness of the developed control, experimental test cases have been performed in different faulted conditions.
L2EP-Campus de Lille THÈSE présentée par : Taoufik QORIA soutenue le : 5 Novembre 2020 pour obten... more L2EP-Campus de Lille THÈSE présentée par : Taoufik QORIA soutenue le : 5 Novembre 2020 pour obtenir le grade de : Docteur d'HESAM Université préparéeà :École Nationale Supérieure d'Arts et Métiers Spécialité : Génie Electrique Grid-forming control to achieve a 100% power electronics interfaced power transmission systems "Nouvelles lois de contrôle pour former des réseaux de transport avec 100% d'électronique de puissance"
The dq impedance stability analysis for a grid-connected current-control inverter is based on the... more The dq impedance stability analysis for a grid-connected current-control inverter is based on the impedance ratio matrix. However, the coupled matrix brings difficulties in deriving its eigenvalues for the analysis based on the general Nyquist criterion. If the couplings are ignored for simplification, unacceptable errors will be present in the analysis. In this paper, the influence of the couplings on the dq impedance stability analysis is studied. To take the couplings into account simply, the determinant-based impedance stability analysis is used. The mechanism between the determinant of the impedance-ratio matrix and the inverter stability is unveiled. Compared to the eigenvalues-based analysis, only one determinant rather than two eigenvalue s-function is required for the stability analysis. One Nyquist plot or pole map can be applied to the determinant to check the right-half-plane poles. The accuracy of the determinant-based stability analysis is also checked by comparing with the state-space stability analysis method. For the stability analysis, the coupling influence on the current control, the phase-locked loop, and the grid impedance are studied. The errors can be 10% in the stability analysis if the couplings are ignored.
The question of grid forming control is very different depending on the connection to a low volta... more The question of grid forming control is very different depending on the connection to a low voltage or high voltage grid. In case of higher power application, the low switching frequency may induce some stability issues. This question has been studied and some solutions have been proposed through new inner current and voltage control tuning methods. However, the possible interactions between the inner and the outer controls have not been discussed yet. Actually, in large power system, the phasor modeling approximation is used in order to ease the analysis and reduce the time computations. It assumes a good decoupling between the control loops, which allows neglecting the inner loop dynamics. This paper investigates the effectiveness of this assumption by taking some examples of tuning methods proposed in the literature and showing the ability of each method to guarantee the decoupling between controllers. In this paper, small-signal analysis tool, participation factors and parametric sensitivities are used.
HAL (Le Centre pour la Communication Scientifique Directe), Sep 1, 2018
The use of DC transmission is particularly advantageous for long-distance transmission and interc... more The use of DC transmission is particularly advantageous for long-distance transmission and interconnection of asynchronous AC networks. Several converter topologies can be used for HVDC. Multilevel Modular Converters (MMCs) are the most favored given their technological advantages over other converters topologies. Due to their industrial maturity, they have become essential for all AC / DC conversion. So far, they have always been studied with a voltage source on DC side. However, when the converter is equipped with DC breaker, a series inductor is associated to limit current variations. This has consequences in term of modeling and control determination. This article aims to propose a modification of the control law in order to take into account this inductor. To facilitate the control organization, the Energetic Macroscopic Representation (EMR) is used. Modeling and Control of the Modular Multilevel Converter connected to an inductive DC source using Energetic Macroscopic Representation QORIA Taoufik EPE'18 ECCE Europe
IEEE Journal of Emerging and Selected Topics in Power Electronics, Jun 1, 2020
The present paper deals with the post-fault synchronization of a voltage source converter based o... more The present paper deals with the post-fault synchronization of a voltage source converter based on the droop control. In case of large disturbances on the grid, the current is limited via current limitation algorithms such as the virtual impedance. During the fault, the power converter internal frequency deviates resulting in a converter angle divergence. Thereby, the system may lose the synchronism after fault clearing and which may lead to instability. Hence, this paper proposes a theoretical approach to explain the dynamic behavior of the grid forming converter subject to a three phase bolted fault. A literal expression of the critical clearing time is defined. Due to the precise analysis of the phenomena, a simple algorithm can be derived to enhance the transient stability. It is based on adaptive gain included in the droop control. These objectives have been achieved with no external information and without switching from one control to the other. To prove the effectiveness of the developed control, experimental test cases have been performed in different faulted conditions.
HAL (Le Centre pour la Communication Scientifique Directe), Sep 1, 2018
The use of DC transmission is particularly advantageous for long-distance transmission and interc... more The use of DC transmission is particularly advantageous for long-distance transmission and interconnection of asynchronous AC networks. Several converter topologies can be used for HVDC. Multilevel Modular Converters (MMCs) are the most favored given their technological advantages over other converters topologies. Due to their industrial maturity, they have become essential for all AC / DC conversion. So far, they have always been studied with a voltage source on DC side. However, when the converter is equipped with DC breaker, a series inductor is associated to limit current variations. This has consequences in term of modeling and control determination. This article aims to propose a modification of the control law in order to take into account this inductor. To facilitate the control organization, the Energetic Macroscopic Representation (EMR) is used. Modeling and Control of the Modular Multilevel Converter connected to an inductive DC source using Energetic Macroscopic Representation QORIA Taoufik EPE'18 ECCE Europe
The inner cascaded structure-based grid-forming control is a typical solution used to impose an A... more The inner cascaded structure-based grid-forming control is a typical solution used to impose an AC voltage magnitude across the output filters of the power inverters. Yet, because of the limited inverter's bandwidth resulting from the low-switching frequencies in transmission systems, the interaction (i.e., coupling) between control loops is highly likely making the understanding of the system behavior complex and its simplification unaffordable and may also lead to instabilities. The novelty of this paper consists in proposing a simple open-loop direct voltage control to reduce the number of the inner control regulators, and thereby guaranteeing a decoupling between the inner and outer control layers as well as increasing the system stability margin. This statement is well supported with a smallsignal analysis and progressive order model reduction of the system. The overall concept is validated in a 10-bus grid case while comparing the EMT and Phasor-based simulations. The practical feasibility of the control itself is experimentally proved with different test cases.
HAL (Le Centre pour la Communication Scientifique Directe), Jun 23, 2019
In the near future, power converters will be massively introduced in transmission grids due to re... more In the near future, power converters will be massively introduced in transmission grids due to renewable energy sources and high voltage direct current (HVDC) increase. Voltage Source Converter (VSC) control laws assume that Synchronous Generators (SGs) build a stiff AC voltage which allows the synchronization of converters. This is one of the major reasons that limit the high integration of currentsource converters in transmission grid. This constraint is no longer relevant when power converters operate as a voltage source based on the grid-forming concept. This concept uses an inner cascaded PI controllers in order to regulate the output AC voltage. However, it is difficult to tune its controller parameters for stable operation in grid-connected mode. This paper proposes an alternative state-feedback control with integral compensator based linear quadratic regulation (LQR) in order to ensure a stable operation and to get a better AC voltage transient and good decoupling between reactive and active power. The proposed control will be fully analyzed and compared to conventional methods.
HAL (Le Centre pour la Communication Scientifique Directe), Jul 3, 2018
RESUME-L'utilisation de la transmission DC est particulièrement avantageuse pour la transmission ... more RESUME-L'utilisation de la transmission DC est particulièrement avantageuse pour la transmission à longue distance et l'interconnexion des réseaux AC asynchrones. Plusieurs topologies de convertisseur peuvent être utilisées pour le HVDC. Les convertisseurs modulaires multiniveaux (MMC) sont les plus favorisés étant donné leurs avantages technologiques par rapport aux autres topologies de convertisseurs. Du fait de leur maturité industrielle, ils se sont imposés maintenant pour tous les convertisseurs AC/DC à transistors de forte puissance. Jusqu'ici, ils ont toujours été étudiés avec une source de tension côté DC. Or, lorsqu'ils sont équipés de DC breaker, on associe une inductance en série pour limiter les variations de courant. Ceci a des conséquences en terme de modélisation puis de détermination de la commande. Cet article a pour objectif de proposer une modification de commande afin de prendre en compte cette inductance.
Because of the throng of control strategies based Voltage Source Converters (VSC) recently propos... more Because of the throng of control strategies based Voltage Source Converters (VSC) recently proposed in the literature; their classification and characterization are becoming a trending topic. The high similarities of the proposed control strategies may lead to confusions and a misunderstanding of vocabulary. Therefore, this paper seeks first to highlight the possible features fulfilled by power converters in a large power system. The combination of these features is used to classify power converters. Furthermore, power converters can be seen by a power transmission system operators as black boxes, and they may have the same inputs and outputs, which makes their characterizations more difficult. This paper looks to show that only the fundamental nature of the source has an influence on the system dynamic behavior, thus, power converter can be characterized from their transient behavior in response to grid disturbances.
This paper consists first in comparing the well-known virtual impedance and current saturation al... more This paper consists first in comparing the well-known virtual impedance and current saturation algorithms in case of a three-phase short circuit. During the fault, the virtual impedance has an indirect action on the AC current since it depends mainly on the AC voltage controllers dynamics, whereas, the current saturation algorithm has a direct action on the AC current. Thus, a first study consists in comparing the dynamic behavior of the AC current for both methods separately. Once the fault is cleared, the grid-forming converter should be able to resynchronize to the main grid. In this paper, the impact of each current limiting algorithm on the transient stability is highlighted. Based on this comparative approach between the virtual impedance and the current saturation algorithms, a hybrid current limiting control is proposed to benefit the advantages of each algorithm in terms of current limitation and transient stability. To show the effectiveness of the proposed control, timedomain simulations and experimental test cases have been performed.
Le développement rapide de la production d'énergie renouvelable intermittente et des liaisons... more Le développement rapide de la production d'énergie renouvelable intermittente et des liaisons HVDC entraîne une augmentation importante du taux de pénétration des convertisseurs statiques dans les réseaux de transport. Aujourd'hui, les convertisseurs statiques ont pour fonction principale d'injecter une puissance dans le réseau tout en s'appuyant sur des machines synchrones qui garantissent tous les besoins du système électrique. Ce mode de fonctionnement est appelé «Grid-following». Les convertisseurs contrôlés en Grid-following ont plusieurs limitations: leur incapacité à fonctionner en mode autonome, leurs problèmes de stabilité dans des réseaux faibles et en cas de défaut ainsi que leur effet négatif sur l'inertie équivalent du système. Pour relever ces défis, le contrôle en Grid-forming est une bonne solution pour répondre aux besoins du système électrique et permettre un fonctionnement stable et sûr du système même avec un taux de pénétration des convertisseurs statique de 100%. Tout d'abord, trois stratégies de contrôle en Grid-forming sont proposées pour garantir quatre fonctionnalités principales: contrôle de tension, contrôle de puissance, émulation d'inertie et le support de la fréquence. La dynamique et la robustesse du système basées sur chaque contrôle ont été analysées et discutées. Ensuite, selon la topologie du convertisseur, la connexion avec le réseau AC peut nécessiter des filtres et des boucles de contrôle supplémentaires. Dans le cadre de cette thèse, deux topologies de convertisseur ont été envisagées (VSC à 2-niveaux et VSC-MMC) et l'implémentation associée à chacune a été discutée. Enfin, les questions de la protection des convertisseurs Grid-forming contre les surintensités et leur synchronisation post-défaut ont été étudiées, puis, des algorithmes de limitation de courant et de resynchronisation ont été proposés pour améliorer la stabilité transitoire du système. Un banc d'essai a été développé pour confirmer les approches théoriques proposées.The rapid development of intermittent renewable generation and HVDC links yields an important increase of the penetration rate of power electronic converters in the transmission systems. Today, power converters have the main function of injecting power into the main grid, while relying on synchronous machines that guaranty all system needs. This operation mode of power converters is called "Grid-following". Grid-following converters have several limitations: their inability to operate in a standalone mode, their stability issues under weak-grids and faulty conditions and their negative side effect on the system inertia.To meet these challenges, the grid-forming control is a good solution to respond to the system needs and allow a stable and safe operation of power system with high penetration rate of power electronic converters, up to a 100%. Firstly, three grid-forming control strategies are proposed to guarantee four main features: voltage control, power control, inertia emulation and frequency support. The system dynamics and robustness based on each control have been analyzed and discussed. Then, depending on the converter topology, the connection with the AC grid may require additional filters and control loops. In this thesis, two converter topologies have been considered (2-Level VSC and VSC-MMC) and the implementation associated with each one has been discussed. Finally, the questions of the grid-forming converters protection against overcurrent and their post-fault synchronization have been investigated, and then a hybrid current limitation and resynchronization algorithms have been proposed to enhance the transient stability of the system. At the end, an experimental test bench has been developed to confirm the theoretical approach
From the origin of the grid, energy has been delivered to electrical loads mainly by synchronous ... more From the origin of the grid, energy has been delivered to electrical loads mainly by synchronous machines. All the main rules to manage the grid have been based on the electromechanical behavior of these machines which have been extensively studied for many years. Due to the increase of HVDC link and renewable energy sources as wind turbine and PV, power converters are massively introduced in the grid with a fundamentally different dynamic behavior. Some years ago, they were connected as simple power injector. Then, they were asked to provide some ancillary services to the grid, in the future, grid forming capability will be required. Even if gridforming converters had been extensively studied for microgrids and offshore grids, it has to be adapted to transmission grid where the topology may be largely modified. This paper presents an algorithm for calculating the controller parameters of a gridforming converter which guarantee a stable behavior for many different configurations of the grid.
Grid-forming inverters usually use inner cascaded controllers to regulate output AC voltage and c... more Grid-forming inverters usually use inner cascaded controllers to regulate output AC voltage and converter output current. However, at the power transmission system level where the power inverter bandwidth is limited, i.e., low switching frequency, it is difficult to tune controller parameters to achieve the desired performances because of control loop interactions. In this paper, a direct AC voltage control-based state-feedback control is applied. Its control gains are tuned using a linear quadratic regulator. In addition, a sensitivity analysis is proposed to choose the right cost factors that allow the system to achieve the imposed specifications. Conventionally, a system based on direct AC voltage control has no restriction on the inverter current. Hence, in this paper, a threshold virtual impedance has been added to the state-feedback control in order to protect the inverter against overcurrent. The robustness of the proposed control is assessed for different short-circuit ratios using smallsignal stability analysis. Then, it is checked in different grid topologies using time domain simulations. An experimental test bench is developed in order to validate the proposed control.
HAL (Le Centre pour la Communication Scientifique Directe), Dec 12, 2019
The present paper deals with the post-fault synchronization of a voltage source converter based o... more The present paper deals with the post-fault synchronization of a voltage source converter based on the droop control. In case of large disturbances on the grid, the current is limited via current limitation algorithms such as the virtual impedance. During the fault, the power converter internal frequency deviates resulting in a converter angle divergence. Thereby, the system may lose the synchronism after fault clearing and which may lead to instability. Hence, this paper proposes a theoretical approach to explain the dynamic behavior of the grid forming converter subject to a three phase bolted fault. A literal expression of the critical clearing time is defined. Due to the precise analysis of the phenomenon, a simple algorithm can be derived to enhance the transient stability. It is based on adaptive gain included in the droop control. These objectives have been achieved with no external information and without switching from one control to the other. To prove the effectiveness of the developed control, experimental test cases have been performed in different faulted conditions.
L2EP-Campus de Lille THÈSE présentée par : Taoufik QORIA soutenue le : 5 Novembre 2020 pour obten... more L2EP-Campus de Lille THÈSE présentée par : Taoufik QORIA soutenue le : 5 Novembre 2020 pour obtenir le grade de : Docteur d'HESAM Université préparéeà :École Nationale Supérieure d'Arts et Métiers Spécialité : Génie Electrique Grid-forming control to achieve a 100% power electronics interfaced power transmission systems "Nouvelles lois de contrôle pour former des réseaux de transport avec 100% d'électronique de puissance"
The dq impedance stability analysis for a grid-connected current-control inverter is based on the... more The dq impedance stability analysis for a grid-connected current-control inverter is based on the impedance ratio matrix. However, the coupled matrix brings difficulties in deriving its eigenvalues for the analysis based on the general Nyquist criterion. If the couplings are ignored for simplification, unacceptable errors will be present in the analysis. In this paper, the influence of the couplings on the dq impedance stability analysis is studied. To take the couplings into account simply, the determinant-based impedance stability analysis is used. The mechanism between the determinant of the impedance-ratio matrix and the inverter stability is unveiled. Compared to the eigenvalues-based analysis, only one determinant rather than two eigenvalue s-function is required for the stability analysis. One Nyquist plot or pole map can be applied to the determinant to check the right-half-plane poles. The accuracy of the determinant-based stability analysis is also checked by comparing with the state-space stability analysis method. For the stability analysis, the coupling influence on the current control, the phase-locked loop, and the grid impedance are studied. The errors can be 10% in the stability analysis if the couplings are ignored.
The question of grid forming control is very different depending on the connection to a low volta... more The question of grid forming control is very different depending on the connection to a low voltage or high voltage grid. In case of higher power application, the low switching frequency may induce some stability issues. This question has been studied and some solutions have been proposed through new inner current and voltage control tuning methods. However, the possible interactions between the inner and the outer controls have not been discussed yet. Actually, in large power system, the phasor modeling approximation is used in order to ease the analysis and reduce the time computations. It assumes a good decoupling between the control loops, which allows neglecting the inner loop dynamics. This paper investigates the effectiveness of this assumption by taking some examples of tuning methods proposed in the literature and showing the ability of each method to guarantee the decoupling between controllers. In this paper, small-signal analysis tool, participation factors and parametric sensitivities are used.
HAL (Le Centre pour la Communication Scientifique Directe), Sep 1, 2018
The use of DC transmission is particularly advantageous for long-distance transmission and interc... more The use of DC transmission is particularly advantageous for long-distance transmission and interconnection of asynchronous AC networks. Several converter topologies can be used for HVDC. Multilevel Modular Converters (MMCs) are the most favored given their technological advantages over other converters topologies. Due to their industrial maturity, they have become essential for all AC / DC conversion. So far, they have always been studied with a voltage source on DC side. However, when the converter is equipped with DC breaker, a series inductor is associated to limit current variations. This has consequences in term of modeling and control determination. This article aims to propose a modification of the control law in order to take into account this inductor. To facilitate the control organization, the Energetic Macroscopic Representation (EMR) is used. Modeling and Control of the Modular Multilevel Converter connected to an inductive DC source using Energetic Macroscopic Representation QORIA Taoufik EPE'18 ECCE Europe
IEEE Journal of Emerging and Selected Topics in Power Electronics, Jun 1, 2020
The present paper deals with the post-fault synchronization of a voltage source converter based o... more The present paper deals with the post-fault synchronization of a voltage source converter based on the droop control. In case of large disturbances on the grid, the current is limited via current limitation algorithms such as the virtual impedance. During the fault, the power converter internal frequency deviates resulting in a converter angle divergence. Thereby, the system may lose the synchronism after fault clearing and which may lead to instability. Hence, this paper proposes a theoretical approach to explain the dynamic behavior of the grid forming converter subject to a three phase bolted fault. A literal expression of the critical clearing time is defined. Due to the precise analysis of the phenomena, a simple algorithm can be derived to enhance the transient stability. It is based on adaptive gain included in the droop control. These objectives have been achieved with no external information and without switching from one control to the other. To prove the effectiveness of the developed control, experimental test cases have been performed in different faulted conditions.
Uploads
Papers by Taoufik QORIA