Selamat Riadi

Followers

Following

Public Views

Interests

Uploads

Papers by Selamat Riadi

Development of Learning Media using Hydraulic Demonstrations to Increase Learning Outcomes of Mechanical Engineering Students

Proceedings of the 4th Annual Conference of Engineering and Implementation on Vocational Education, ACEIVE 2022, 20 October 2022, Medan, North Sumatra, Indonesia

The hydraulic learning process used so far is still using power points as well as books, which ma... more The hydraulic learning process used so far is still using power points as well as books, which makes the hydraulic system learning process less effective. Hydraulics is a tool that has various invisible working systems, where the hydraulic working system is closed with a tube whose work system requires oil, water, and pressure. the need for teaching aids in the teaching and learning process about the hydraulic system so that mechanical engineering students can understand the hydraulic work process directly, which is expected to improve the learning outcomes of mechanical engineering students. as the research method used is a 4D model (define, design, develop, and disseminate). The results showed that the validation value of teaching aids was 87.19% (very good), the content validation was 82.67% (very good), the practicality of teaching aids, when used by lecturers, was 83%, and the effectiveness of teaching aids in terms of student activities was 75.33%. Learning outcomes after using hydraulic system props had a completeness of 83.33% and an incompleteness of 16.67%.

Download

Development DEVELOPMENT OF HYDRAULIC COURSE E-MODULES TO INCREASE STUDENTS' LEARNING INTEREST MECHANICAL ENGINEERING EDUCATION

International Journal of Innovative Technologies in Social Science

The development of printed module teaching materials in the form of hard copies into electronic-b... more The development of printed module teaching materials in the form of hard copies into electronic-based modules with an android system or better known as Android-based E-Modules, with this electronic media it can attract students' interest in reading because it makes it easier for students without connecting to the internet continuously. This electronic module can also help students study independently and is a good choice for developing a module. Electronic modules are innovative media that can increase interest in learning. Digital E-Module development uses a research and development (R&D) approach, which is a process used to develop and validate products. Data collection techniques in validating learning material products are carried out by distributing questionnaires. This research was designed in three stages, namely (1) Research in the form of planning and formulation of learning objectives. (2) Development in the form of making E-Modules (3) Formative evaluation and revisio...

Download

Pengaruh strategi pemberian latihan, gaya kognitif, dan asal sekolah terhadap hasil belajar mekanika teknik : laporan penelitian

Unknown Penerbit, 2001

Modifikasi Dan Pengujian Gerinda Toolpost Pada Mesin Bubut Konvensional

Pengaruh strategi pengorganisasian isi mata kuliah terhadap hasil belajar statistik terapan : laporan penelitian

Unknown Penerbit, 2004

Development of Video Tutorial Operating CNC Machine Using Nanjing Swansoft Simulator Based on YouTube Chanel as an Alternative Media on Network Learning

Journal of Community Research and Service, 2022

This study examines the limitations of CNC (Computer Numerical Control) machine facilities owned ... more This study examines the limitations of CNC (Computer Numerical Control) machine facilities owned by the Department of Mechanical Engineering Education, Faculty of Engineering, State University of Medan (JPTM FT UNIMED) which are obstacles for students in improving competence. From these problems, alternatives and solutions are needed, namely, utilizing the Nanjing Swansoft simulator software to improve the competence of CNC machining techniques. The lack of CNC machine facilities used in learning CNC machining engineering courses at JPTM FT UNIMED so research on this problem is still needed. This study aims to produce a video tutorial on how to operate a CNC machine using a Nanjing Swansoft simulator based on a YouTube channel. This study aims to produce a video tutorial on how to operate a CNC machine using a nanjing swansoft simulator based on a YouTube channel. The type of research used is research and development (Research and Development) from Borg and Gall. The feasibility of ...

Download

Development of interactive tutorial video based on curriculum based on Indonesian national qualification framework in machinery material Basic completion of completion

Proceedings of the Proceedings of the 2nd Annual Conference of Engineering and Implementation on Vocational Education (ACEIVE 2018), 3rd November 2018, North Sumatra, Indonesia, 2019

This development research aims to develop a curriculum-based interactive video tutorial based on ... more This development research aims to develop a curriculum-based interactive video tutorial based on the Indonesiannational qualification framework in the basic turning competency machining course at the Mechanical Engineering Education Study Program. Curriculum-based interactive video tutorial based on the Indonesian national qualification framework at the engineering course This basic turning competency is designed to be able to improve student learning outcomes so that they can fully understand the material provided in the engineering course. This study uses the development method of the IDI (Instructional Development Institute), as for the procedure for developing the IDI, namely: define, develop, and evaluate. Type of data is primary data where data is provided by media experts, lecturers and students. The data analysis technique used is descriptive data analysis technique that is by describing validity, practicality and effectiveness using a curriculum-based interactive video tutorial based on the Indonesian national qualification framework in the basic turning competency machining course. The results obtained from this research and development are as follows; a Material expert: (1) Quality of learning material with a validation value of 0.90; (2) Quality of Learning Strategies with a validation value of 1.10; (3) About the learning delivery system with a validation value of 0.88. So that it can be seen the trend level of the assessment of material experts in a score of 0.96 with a range of "Valid"; b. Learning design experts: (1) Quality of learning design with a validation value of 0.94; (2) Quality of Learning Strategies with a validation value of 0.91; (3) About aspects of the quality of the interaction design with a validation value of 0.91 (4) Regarding the aspect of presentation quality with a validation value of 0.89; c. Media Experts: (1) Programming Aspects with validation values of 0.92; (2) Graphic design aspects on technical or display quality with a validation value of 0.94; (3) Technical Quality Aspects or performance with a validation value of 0.91; So that it can be seen the level of tendency of experts or material expert validators, learning design experts and meida experts in the average score of 0.91 in the "Valid" category. Practical test results of curriculum-based interactive video tutorials based on the Indonesian national qualification framework in machining courses Basic turning competencies by lecturers and students are conducted through lecturer and student response questionnaires showing the results of practical test curriculum-based interactive video tutorials based on the Indonesian national qualification framework in machining courses Basic turning competency courses by the response of the lecturer to show the level of practicality with the percentage of 88.75% in the practical category. practicality test the curriculum-based interactive video tutorial based on the Indonesian national qualification framework at the machining course the basic turning competency by the student response shows the practicality level with the percentage of 98.2% in the very practical category. A curriculum-based interactive video tutorial based on the Indonesian national qualification

Download

Analysis of The Use of Lecture Facilities in The Department of Mechanical Engineering Education Welcoming the Opening of New Study Program

Proceedings of the Proceedings of the the 3rd Annual Conference of Engineering and Implementation on Vocational Education, ACEIVE 2019, 16 November 2019, Universitas Negeri Medan, North Sumatra, Indonesia, 2020

This research aims to: 1) provide information for policy making related to strategies for meeting... more This research aims to: 1) provide information for policy making related to strategies for meeting the needs of lecture spaces for opening new study programs, 2) making a map of space requirements based on KKN for each study program at the Faculty of Engineering. The research design is a type of ex post facto research with a descriptive approach. Ex post facto research aims to conduct a variable analysis or review of the conditions of existing infrastructure in the field. The results showed that the amount of study space needed for opening a new study program was 5 rooms. Availability obtained for the purposes of 5 new study programs is obtained from the efficient use of lecture rooms obtained as much as 1 study group room and mapping of existing infrastructure is obtained as many as 4 study groups.

Download

Development of Machining Technology Material by Using Teaching Factory Based on Metacognitive Skill Model

This research is to develop learning material of machining technology with Teaching Factory Model... more This research is to develop learning material of machining technology with Teaching Factory Model approach based on metacognitive skill on Mechanical Engineering Education in Universitas Negeri Medan. The method used in research and development is development design of ADDIE. The results show that machinery technology lecture with Teaching Factory Model approach based on metacognitive skill is proper to be used with practicability level reach to 80.39%, and it is effective because resulting significant differentiation of study result value between experimental class and control class based on result of t experimental with value of tarithmetic = 2.72 and ttable = 2.021. Thus, Machining Technology Textbook by using Teaching Factory Based on Metacognitive Skill Model can be used practically and effectively in the learning process.

Download

Teaching Factory Learning: Implementation of Independent Learning Policies and Independent Campus at State University of Medan

Advances in Social Science, Education and Humanities Research/Advances in social science, education and humanities research, 2024

Pengembangan Media Pembelajaran Pemeliharaan Sasis Dan Pemindah Tenaga Berbasis Adobe Flash Di SMK Negeri 2 Medan

RODA: Jurnal Pendidikan dan Teknologi Otomotif

Penelitian pengembangan ini bertujuan untuk (1) mengetahui penilaian ahli materi dan ahli media t... more Penelitian pengembangan ini bertujuan untuk (1) mengetahui penilaian ahli materi dan ahli media terhadap media pembelajaran, dan (2) mengetahui kelayakan media pembelajaran berdasarkan penilaian ahli materi, media dan hasil belajar siswa. Metode yang digunakan pada penelitian ini adalah penelitian pengembangan (Research and Development). Penelitian ini dilakukan di SMK Negeri 2 Medan dengan metode pengumpulan data menggunakan angket. Hasil penelitian menunjukkan bahwa (1) Hasil penilaian ahli materi pada aspek tujuan pembelajaran mendapat rerata skor 4,33 dengan kategori Sangat Layak, aspek materi mendapat rerata skor 4,25 dengan kategori Sangat Layak, aspek konten materi mendapat rerata skor 4,26 dengan kategori Sangat Layak, dan aspek self evaluation mendapat rerata skor 4,16 dengan kategori Sangat Layak. Hasil penilaian ahli media pada aspek manfaat media mendapat rerata skor 3,83 dengan kategori Sangat Layak, aspek desain media mendapat rerata skor 3,76 dengan kategori Sangat L...

Download

Development of CNC machining II textbooks to increase the effectiveness of student learning in the mechanical engineering education study program

Journal of Physics: Conference Series

This research is research development. The research model used in this research is the developmen... more This research is research development. The research model used in this research is the development of 4D (Four-D Model) which consists of four stages: the defining stage, the design stage, and the development phase. While the dissemination phase was not carried out because this research was only limited to the feasibility test and the effectiveness of learning media in the form of books. In this study, the respondents were 3 book experts, 3 lecturers who had CNC machine expertise competence in the Department of Mechanical Engineering Education, Faculty of Engineering, State University of Medan. The research instrument used to collect data in the form of questionnaire sheets and observation sheets. Data analysis was performed to determine the feasibility and effectiveness of the resulting CNC II / advanced book. From the results of this development research, it was shown that the developed CNC II / advanced book was suitable for use in learning advanced CNC courses. The results of bo...

Development of Learning Media using Hydraulic Demonstrations to Increase Learning Outcomes of Mechanical Engineering Students

Proceedings of the 4th Annual Conference of Engineering and Implementation on Vocational Education, ACEIVE 2022, 20 October 2022, Medan, North Sumatra, Indonesia

Download

Development DEVELOPMENT OF HYDRAULIC COURSE E-MODULES TO INCREASE STUDENTS' LEARNING INTEREST MECHANICAL ENGINEERING EDUCATION

International Journal of Innovative Technologies in Social Science

Download

Pengaruh strategi pemberian latihan, gaya kognitif, dan asal sekolah terhadap hasil belajar mekanika teknik : laporan penelitian

Unknown Penerbit, 2001

Modifikasi Dan Pengujian Gerinda Toolpost Pada Mesin Bubut Konvensional

Pengaruh strategi pengorganisasian isi mata kuliah terhadap hasil belajar statistik terapan : laporan penelitian

Unknown Penerbit, 2004

Development of Video Tutorial Operating CNC Machine Using Nanjing Swansoft Simulator Based on YouTube Chanel as an Alternative Media on Network Learning

Journal of Community Research and Service, 2022

Download

Development of interactive tutorial video based on curriculum based on Indonesian national qualification framework in machinery material Basic completion of completion

Proceedings of the Proceedings of the 2nd Annual Conference of Engineering and Implementation on Vocational Education (ACEIVE 2018), 3rd November 2018, North Sumatra, Indonesia, 2019

Download

Analysis of The Use of Lecture Facilities in The Department of Mechanical Engineering Education Welcoming the Opening of New Study Program

Download

Development of Machining Technology Material by Using Teaching Factory Based on Metacognitive Skill Model

Download

Teaching Factory Learning: Implementation of Independent Learning Policies and Independent Campus at State University of Medan

Advances in Social Science, Education and Humanities Research/Advances in social science, education and humanities research, 2024

Pengembangan Media Pembelajaran Pemeliharaan Sasis Dan Pemindah Tenaga Berbasis Adobe Flash Di SMK Negeri 2 Medan

RODA: Jurnal Pendidikan dan Teknologi Otomotif

Download

Development of CNC machining II textbooks to increase the effectiveness of student learning in the mechanical engineering education study program

Journal of Physics: Conference Series

Selamat Riadi

Uploads

Papers by Selamat Riadi

Log In