Papers by SAMUEL JOSE ALVAREZ SANTOS
Energies, 2020
The continuous increase of the world’s population results in an increased demand for energy drast... more The continuous increase of the world’s population results in an increased demand for energy drastically from the industrial and domestic sectors as well. Moreover, the current public awareness regarding issues such as pollution and overuse of petroleum fuel has resulted in the development of research approaches concerning alternative renewable energy sources. Amongst the various options for renewable energies used in transportation systems, biodiesel is considered the most suitable replacement for fossil-based diesel. In what concerns the industrial application for biodiesel production, homogeneous catalysts such as sodium hydroxide, potassium hydroxide, sulfuric acid, and hydrochloric acid are usually selected, but their removal after reaction could prove to be rather complex and sometimes polluting, resulting in increases on the production costs. Therefore, there is an open field for research on new catalysts regarding biodiesel production, which can comprise heterogeneous catalys...
Energies, 2019
In this study, micro-structured calcium oxide obtained from the calcination (850 °C for 3 h) of G... more In this study, micro-structured calcium oxide obtained from the calcination (850 °C for 3 h) of Gallus gallus domesticus (chicken) eggshells was used as a catalyst in the transesterification of soybean oil. This catalyst was characterized by Scanning Electron Spectroscopy (SEM) methods. The structure of the obtained CaO showed several agglomerates of white granular solids with a non-regular and unsymmetrical shape. In terms of calcium oxide catalytic activity, three different catalyst loadings (1%wt, 3%wt, and 5%wt) were tested for the same reaction conditions, resulting in transesterification yields of 77.27%wt, 84.53%wt, and 85.83%wt respectively. The results were compared to the current literature, and whilst they were lower, they were promising, allowing us to conclude that the tendency of yield improvement for this reaction, when the size range of catalyst particles is to be reduced to a nano scale, can be verified.
Technologies, 2016
In the present study, results from three different CO 2 capture experimental scales (laboratory, ... more In the present study, results from three different CO 2 capture experimental scales (laboratory, pilot unit, and a larger pilot unit), using aqueous amine solutions of methyldiethanolamine (MDEA) 20 wt %, are compared in terms of loading capacity. All three tested scales produced results regarding CO 2 absorption using MDEA aqueous solutions, which were largely in accordance with the theoretical loading capacity of the used amine. Nevertheless, the observed differences between the theoretical and actual absorption behaviors of MDEA solutions for the different scales can be justified with the relative weight that process variables exhibit when the process is scaled up. Therefore, in order to achieve a correct scale-up of the process, simulations should be performed in order to define the best set of operational parameters in order to achieve high production yields and therefore more process profitability.
Environmental Technology, 2014
CO2 capture from gaseous effluents is one of the great challenges faced by chemical and environme... more CO2 capture from gaseous effluents is one of the great challenges faced by chemical and environmental engineers, as the increase in CO2 levels in the Earth atmosphere might be responsible for dramatic climate changes. From the existing capture technologies, the only proven and mature technology is chemical absorption using aqueous amine solutions. However, bearing in mind that this process is somewhat expensive, it is important to choose the most efficient and, at the same time, the least expensive solvents. For this purpose, a pilot test facility was assembled and includes an absorption column, as well as a stripping column, a heat exchanger between the two columns, a reboiler for the stripping column, pumping systems, surge tanks and all necessary instrumentation and control systems. Some different aquous amine solutions were tested on this facility and it was found that, from a set of six tested amines, diethanol amine is the one that turned out to be the most economical choice, as it showed a higher CO2 loading capacity (0.982 mol of CO2 per mol of amine) and the lowest price per litre (25.70 €/L), even when compared with monoethanolamine, the benchmark solvent, exhibiting a price per litre of 30.50 €/L.
Uploads
Papers by SAMUEL JOSE ALVAREZ SANTOS