Letters in Information Technology Education, May 29, 2023
Digital skills are crucial to accessing jobs, business opportunities, and information. The vocati... more Digital skills are crucial to accessing jobs, business opportunities, and information. The vocational school is vital in fulfilling Human Resources (HR) and future workforce candidates. Therefore, subjects and learning media are needed to accommodate students' digital skills. The analysis methods are Strength, Weakness, Opportunity, and Threat (SWOT) and Systematic Literature Review (SLR). Cybersecurity is a desirable talent area of the future and is one of the digital skills competency areas. The results map the alignment of the scope of the Cybersecurity subject material and Vilanets learning media. These results can be used as a reference for the digital skills of students in vocational schools.
The liquid waste of the fish smoking center is the remaining waste water used for washing the ins... more The liquid waste of the fish smoking center is the remaining waste water used for washing the inside and outside of the fish's body. Fish washing waste has a high ammonia content so it has a negative effect on the environment. Based on preliminary tests at the Center for Smoking Fish X, Tulungagung Regency, ammonia was produced of 11,047 mg/L, which exceeds the quality standard of the Minister of Environment of the Republic of Indonesia Number 5 of 2014. Therefore, this study aims to determine the effectiveness of the combination of Effective Microorganism 4 (EM 4) and Pistia stratiotes in reducing ammonia in the wastewater of fish smoking centers. The research method uses laboratory scale experiments. The research design is the Pretest-Posttest Control Design. The independent variable in this study was the combination of Effective Microorganism 4 (EM 4) and Pistia stratiotes. While the dependent variable is the level of ammonia in the liquid waste of fish smoking centers. Data analysis used the One Way ANOVA test. The results showed that the effectiveness of reducing ammonia ranged from 23.45 percent-93.56 percent. Based on the Post-Hoc Test it was found that the decrease in ammonia in each treatment had a significant difference.
East Java currently has 1,996 Vocational Schools with 220,958 graduates. However, of the total gr... more East Java currently has 1,996 Vocational Schools with 220,958 graduates. However, of the total graduates only 64.11 percent can be accepted in the industry. This shows that of the total Vocational Schools in East Java, 40 percent of the quality of graduates is not standardized. The total skilled workforce in East Java, both from SMK graduates, Mini Vocational Schools, BLK (vocational training bodies) and Polytechnics as many as 234,088 people. For this reason the East Java Provincial Government is targeting 2019 the composition of vocational education 70 percent of SMKs and 30 percent of high schools are completed. Meanwhile, job vacancies available in East Java reach 390 thousand to 400 thousand and only 234 thousand can be fulfilled, resulting in a shortage of more than 100 thousand skilled workers. The analysis shows the importance of an in-depth study so that interest in choosing studies in vocational education in East Java increases, the implementation of the KKNI (Indonesian National Qualifications Framework) is better, improving the quality of facilities and facilities with five Vocational programs in one laboratory. innovation, provision of employability skills according to the skills needed in the era of industrial revolution 4.0, the introduction of the apprenticeship system is more relevant to the needs of the business world / industry, vocational education teacher qualifications, and internationalization of vocational education and training aimed at providing students with knowledge, skills and competencies needed in the international labor market.
Sebuah bengkel pada sekolah kejuruan rentan terhadap bahaya kecelakaan terutama SMK bidang teknol... more Sebuah bengkel pada sekolah kejuruan rentan terhadap bahaya kecelakaan terutama SMK bidang teknologi dan rekayasa, oleh karena itu bengkel harus dikelola oleh guru yang profesional memiliki keterampilan manajemen bengkel yang memadai. Oleh karena itu sangat diperlukan pelatihan bagi guru SMK tentang manajemen bengkel untuk mencegah terjadinya kecelakaan kerja bagi para siswa saat kegiatan di bengkel. Pelatihan saat ini dilakukan pada pada guru-guru produktif bidang teknologi dan rekayasa di SMK Canda Bhirawa Pare kediri sebanyak 41 orang. Pelatihan dilakukan oleh Tim pengabdian kepada Masyarakat LP2M Universitas Negeri Malang. Pelatihan manajemen bengkel dilakukan dengan materi teori dan praktik. Hasil pelatihan menunjukkan bahwa rata-rata kompetensi nilai pre-test 68,07; nilai pos-test 90,64. Sehingga terdapat kenaikan kompetensi dari sebelum pelatihan disbanding setelah pelatihan sebesar 22,57.
This study aimed to reveal the contribution of Tri Hita Karana cultural implementation and self-e... more This study aimed to reveal the contribution of Tri Hita Karana cultural implementation and self-efficacy in fostering technopreneurship intentions in students of the Informatics Management Study Program. Technopreneurship is an opportunity to use as an effort to help solving unemployment problems. It can be done by entrepreneurship based on technology. The research method used was quantitative approach with the type of ex post facto research. The research samples were students of the Informatics Management Study Program with a total sample of 30 respondents. The data analysis technique used was multiple regression analysis. The results showed that the cultural implementation of the Tri Hita Karana and self-efficacy had a positive contribution to the growth of technopreneurship intentions among students of the Informatics Management Study Program.
Public health programs aim to assure fair access to high-quality care for all necessary health ca... more Public health programs aim to assure fair access to high-quality care for all necessary health care packages, including preventive, promotional, curative, rehabilitative, and palliative care. Currently, we face numerous global issues, including issues in the public health aspect. Some of the popular and essential global issues are (1) generation XYZ, (2) industrial era 4.0, and (3) society 5. As these issues revolve around our everyday life, the public health response to those issues are essential. In this study, we extracted virtual materials supporting the idea, description, and of a paper. Our analysis results suggest that (1) gen Z can serve as a goal model since gen X and Y tend to follow, (2) aspects of the 4.0 industry such as artificial intelligence, Internet of things, big data, augmented virtual and so forth, can be used as tools, and (3) society 5.0 can be used as perspective tools and goals.
Russian Journal of Agricultural and Socio-Economic Sciences, Oct 25, 2016
Vocational school is a secondary school of which purpose is to equip students with conceptual kno... more Vocational school is a secondary school of which purpose is to equip students with conceptual knowledge and skills in technology as well as professional vocational skills that meets the demand of the society. Science and technology have always evolved rapidly. Teachers should keep updating their knowledge, especially one related to the current demand of the industry so that they will not be left behind because the knowledge they learned at school may be different from it is now. The study is a qualitative study of which objects are two public and private vocational schools concentrating in automotive located in Sidoarjo. The findings reveal that industrial internship for vocational school teachers needs to be conducted and the two vocational schools have conducted one. The internship allows the teachers to teach their students about the culture, and current development of science and technology in the automotive industry.
Liquid waste produced by the leather tanning industry is included in the list of hazardous and to... more Liquid waste produced by the leather tanning industry is included in the list of hazardous and toxic wastes for the environment because it contains one of the chemicals, namely ammonia. The goal of this study was to minimize ammonia levels in tannery effluent by mixing Poly Aluminum Chloride (PAC) and filtering with activated charcoal and zeolite sand. This research method uses a control group and an experimental group with three repetitions for each type of reagent. After treatment, the ammonia content was tested using a Spectrophotometer. The data was examined using SPSS using the Regression Test to see if there was an effect of treatment on ammonia content reduction, and then the Kruskal Wallis Test in order of mean ranking to find the most effective type and level of treatment. The Mann Whitney test was then used to see how the relationship between the variables affected the results. The result was found that the PAC reagent level of 3.5 grams was the most effective in reducing ammonia to below the specified quality standard. Efforts to reduce ammonia are carried out to prevent the impact of ammonia gas which is harmful to human health.
Penelitian ini bertujuan untuk mengetahui persepsi dosen dan mahasiswa terhadap efektivitas pengg... more Penelitian ini bertujuan untuk mengetahui persepsi dosen dan mahasiswa terhadap efektivitas penggunaan teknologi AR untuk industri arsitektur dan jasa konstruksi serta tugas-tugas yang terkait, melalui penggunaan perangkat seluler. Penelitian ini merupakan penelitian deskriptif dengan metode survey. Sampel pada penelitian ini adalah dosen dan mahasiswa program studi arsitektur Sekolah Tinggi Teknologi STIKMA Malang. Instrumen penelitian dikembangkan dari hasil studi literatur dan studi pendahuluan untuk membangun basis pengetahuan dan pemahaman tentang teknologi AR. Kuesioner terbagi menjadi: 1) Informasi Umum: untuk mengidentifikasi latar belakang responden; 2) Pengetahuan tentang AR/VR: untuk menilai pemahaman responden tentang AR; 3) AR di industri konstruksi: untuk mengukur pandangan peserta tentang kesesuaian AR untuk tugas konstruksi; dan 4) Fokus Studi: untuk mengukur kelayakan mengadopsi solusi AR di industri konstruksi. Teknik analisis data menggunakan analisis data kuantitatif dengan pendekatan deskriptif. Hasil penelitian menunjukkan bahwa persepsi terhadap penerapan teknologi AR untuk konstruksi umumnya positif. Anomali tak terduga di sini tampaknya adalah Pendidikan dan Jejaring Sosial hanya 3 dan 4 orang yang percaya bahwa teknologi VR dan AR akan sangat bermanfaat. Teknologi AR akan berguna untuk tugas-tugas konstruksi tetapi akan membutuhkan lebih banyak pekerjaan di beberapa area tertentu (seperti manajemen proyek/lokasi serta inspeksi dan pemeliharaan), jika cakupannya lebih luas dan lebih detail.
Preventia : The Indonesian Journal of Public Health
Nitrogen, phosphorus and potassium concentration in liquid organic fertilizer can be obtained fro... more Nitrogen, phosphorus and potassium concentration in liquid organic fertilizer can be obtained from organic materials. Liquid organic fertilizer can be made from vegetable waste, charcoal, and gold snail (Pomacea canaliculata L.). This study aimed to know the concentration of nitrogen, phosphorus and potassium in liquid organic fertilizers of waste vegetable, charcoal and snail. Methods used to test nitrogen was the Kjeldahl method, while potassium and phosphorus tested with spectrophotometer. The results showed that the concentration of nitrogen, phosphorus and potassium in liquid organic fertilizers of waste vegetable, charcoal and snail were 0,2612 percent; 0,0334 percent; and 0,1421 percent. This concentration didn’t meet the standard of liquid organic fertilizers quality based on MOA No. 70 of 2010 which is 3 until 6 percent.
Pada era revolusi industri 4.0 digitalisasi berkembang berdampak pada industri-industri dalam bid... more Pada era revolusi industri 4.0 digitalisasi berkembang berdampak pada industri-industri dalam bidang fashion. Adanya perkembangan tersebut maka menyebabkan peserta didik di SMK Kompetensi Keahlian Tata Busana mulai diperkenalkan menggunakan software aplikasi dalam membuat produk desain digital. Guru produktif tata busana pada saat ini harus bisa menerapkan konsep virtual reality fashion dengan memanfaatkan software aplikasi sebagai media pembelajaran dalam mengajarkan peserta didik untuk membuat desain berbasis digital. Akan tetapi permasalahan yang ada yaitu masih kurangnya media pembelajaran seperti video tutorial, buku pendamping, dan modul sebagai pendukungnya. Oleh sebab itu, diperlukannya pengembangan media pembelajaran video tutorial dalam membuat virtual reality fashion. Tahapan proses pengembangan media pembelajaran menggunakan metode penelitian R&D dengan mengadaptasi model penelitian dan pengembangan ADDIE yang meliputi lima tahap pengembangan yaitu analysis, design, deve...
Bengkel/laboratorium di Sekolah Menengah Kejuruan masih sebatas sebagai tempat praktik siswa bel... more Bengkel/laboratorium di Sekolah Menengah Kejuruan masih sebatas sebagai tempat praktik siswa belum banyak dimanfaatkan oleh para steak holders. Keberadaan bengkel di Sekolah Menengah Kejuruan sangat penting dalam menunjang kompetensi guru dan siswa yang dapat mempengaruhi kualitas lulusan. Kompetensi yang dimiliki oleh siswa tidak hanya pada penguasaan teori saja, apalagi pada bidang teknik, tetapi harus di padukan antara teori dan praktik. Oleh karena itu maka peran guru menjadi sangat penting dalam penguasaan pengelolaan bengkel. Pelatihan manajemen bengkel bagi guru mata pelajaran praktik di SMK Kota Malang diikuti oleh 30 Orang diselenggarakan oleh Tim Dosen Program Studi Pendidikan Teknik Mesin FT UM.Hasil pelatihan menunjukkan adanya peningkatan pemahaman manajemen bengkel/laboratorium bagi para guru SMK di wilayah Kota Malang, diharapkan kegiatan pembelajaran dibengkel/laboratorium dapat berjalan lebih baik dan dapat meningkatkan prestasi siswa baik dari dimensi pengetahu...
Mutu sekolah kejuruan sangat ditentukan oleh kelengkapan sarana prasarana praktik yang ada dibeng... more Mutu sekolah kejuruan sangat ditentukan oleh kelengkapan sarana prasarana praktik yang ada dibengkel/laboratorium serta kompetensi guru bidang produktif. Keterampilan mengelola bengkel/laboratorium bagi guru SMK akan berdampak pada kelancaran kegiatan pembelajaran, terhindarnya kecelakaan kerja saat kegiatan praktikum, dan berdampak pada mutu lulusan. Pengabdian Masyarakatn ini bertujuan untuk meningkatkan pengatahuan dan keterampiran para guru SMK di Kabupaten Trenggalek dalam pengelolaan dan pengoperasian bengkel guna mencegah kecelakaan kerja. Metode kegiatan yang digunakan meliputi ceramah, tanya-jawab, dan demonstrasi. Peserta pelatihan diwajibkan mengikuti pre-test dan pos-test untuk melihat keberhasilan pelaksanaan pelatihan. Hasil kegiatan menunjukkan bahwa peserta pelatihan mengalami peningkatan pemahaman dan kompetensi manajemen bengkel/laboratorium pendidikan. Kata kunci — kecelakaan kerja, kompetensi guru SMK, manajemen bengkel Abstract The quality of vocational schools...
Letters in Information Technology Education, May 29, 2023
Digital skills are crucial to accessing jobs, business opportunities, and information. The vocati... more Digital skills are crucial to accessing jobs, business opportunities, and information. The vocational school is vital in fulfilling Human Resources (HR) and future workforce candidates. Therefore, subjects and learning media are needed to accommodate students' digital skills. The analysis methods are Strength, Weakness, Opportunity, and Threat (SWOT) and Systematic Literature Review (SLR). Cybersecurity is a desirable talent area of the future and is one of the digital skills competency areas. The results map the alignment of the scope of the Cybersecurity subject material and Vilanets learning media. These results can be used as a reference for the digital skills of students in vocational schools.
The liquid waste of the fish smoking center is the remaining waste water used for washing the ins... more The liquid waste of the fish smoking center is the remaining waste water used for washing the inside and outside of the fish's body. Fish washing waste has a high ammonia content so it has a negative effect on the environment. Based on preliminary tests at the Center for Smoking Fish X, Tulungagung Regency, ammonia was produced of 11,047 mg/L, which exceeds the quality standard of the Minister of Environment of the Republic of Indonesia Number 5 of 2014. Therefore, this study aims to determine the effectiveness of the combination of Effective Microorganism 4 (EM 4) and Pistia stratiotes in reducing ammonia in the wastewater of fish smoking centers. The research method uses laboratory scale experiments. The research design is the Pretest-Posttest Control Design. The independent variable in this study was the combination of Effective Microorganism 4 (EM 4) and Pistia stratiotes. While the dependent variable is the level of ammonia in the liquid waste of fish smoking centers. Data analysis used the One Way ANOVA test. The results showed that the effectiveness of reducing ammonia ranged from 23.45 percent-93.56 percent. Based on the Post-Hoc Test it was found that the decrease in ammonia in each treatment had a significant difference.
East Java currently has 1,996 Vocational Schools with 220,958 graduates. However, of the total gr... more East Java currently has 1,996 Vocational Schools with 220,958 graduates. However, of the total graduates only 64.11 percent can be accepted in the industry. This shows that of the total Vocational Schools in East Java, 40 percent of the quality of graduates is not standardized. The total skilled workforce in East Java, both from SMK graduates, Mini Vocational Schools, BLK (vocational training bodies) and Polytechnics as many as 234,088 people. For this reason the East Java Provincial Government is targeting 2019 the composition of vocational education 70 percent of SMKs and 30 percent of high schools are completed. Meanwhile, job vacancies available in East Java reach 390 thousand to 400 thousand and only 234 thousand can be fulfilled, resulting in a shortage of more than 100 thousand skilled workers. The analysis shows the importance of an in-depth study so that interest in choosing studies in vocational education in East Java increases, the implementation of the KKNI (Indonesian National Qualifications Framework) is better, improving the quality of facilities and facilities with five Vocational programs in one laboratory. innovation, provision of employability skills according to the skills needed in the era of industrial revolution 4.0, the introduction of the apprenticeship system is more relevant to the needs of the business world / industry, vocational education teacher qualifications, and internationalization of vocational education and training aimed at providing students with knowledge, skills and competencies needed in the international labor market.
Sebuah bengkel pada sekolah kejuruan rentan terhadap bahaya kecelakaan terutama SMK bidang teknol... more Sebuah bengkel pada sekolah kejuruan rentan terhadap bahaya kecelakaan terutama SMK bidang teknologi dan rekayasa, oleh karena itu bengkel harus dikelola oleh guru yang profesional memiliki keterampilan manajemen bengkel yang memadai. Oleh karena itu sangat diperlukan pelatihan bagi guru SMK tentang manajemen bengkel untuk mencegah terjadinya kecelakaan kerja bagi para siswa saat kegiatan di bengkel. Pelatihan saat ini dilakukan pada pada guru-guru produktif bidang teknologi dan rekayasa di SMK Canda Bhirawa Pare kediri sebanyak 41 orang. Pelatihan dilakukan oleh Tim pengabdian kepada Masyarakat LP2M Universitas Negeri Malang. Pelatihan manajemen bengkel dilakukan dengan materi teori dan praktik. Hasil pelatihan menunjukkan bahwa rata-rata kompetensi nilai pre-test 68,07; nilai pos-test 90,64. Sehingga terdapat kenaikan kompetensi dari sebelum pelatihan disbanding setelah pelatihan sebesar 22,57.
This study aimed to reveal the contribution of Tri Hita Karana cultural implementation and self-e... more This study aimed to reveal the contribution of Tri Hita Karana cultural implementation and self-efficacy in fostering technopreneurship intentions in students of the Informatics Management Study Program. Technopreneurship is an opportunity to use as an effort to help solving unemployment problems. It can be done by entrepreneurship based on technology. The research method used was quantitative approach with the type of ex post facto research. The research samples were students of the Informatics Management Study Program with a total sample of 30 respondents. The data analysis technique used was multiple regression analysis. The results showed that the cultural implementation of the Tri Hita Karana and self-efficacy had a positive contribution to the growth of technopreneurship intentions among students of the Informatics Management Study Program.
Public health programs aim to assure fair access to high-quality care for all necessary health ca... more Public health programs aim to assure fair access to high-quality care for all necessary health care packages, including preventive, promotional, curative, rehabilitative, and palliative care. Currently, we face numerous global issues, including issues in the public health aspect. Some of the popular and essential global issues are (1) generation XYZ, (2) industrial era 4.0, and (3) society 5. As these issues revolve around our everyday life, the public health response to those issues are essential. In this study, we extracted virtual materials supporting the idea, description, and of a paper. Our analysis results suggest that (1) gen Z can serve as a goal model since gen X and Y tend to follow, (2) aspects of the 4.0 industry such as artificial intelligence, Internet of things, big data, augmented virtual and so forth, can be used as tools, and (3) society 5.0 can be used as perspective tools and goals.
Russian Journal of Agricultural and Socio-Economic Sciences, Oct 25, 2016
Vocational school is a secondary school of which purpose is to equip students with conceptual kno... more Vocational school is a secondary school of which purpose is to equip students with conceptual knowledge and skills in technology as well as professional vocational skills that meets the demand of the society. Science and technology have always evolved rapidly. Teachers should keep updating their knowledge, especially one related to the current demand of the industry so that they will not be left behind because the knowledge they learned at school may be different from it is now. The study is a qualitative study of which objects are two public and private vocational schools concentrating in automotive located in Sidoarjo. The findings reveal that industrial internship for vocational school teachers needs to be conducted and the two vocational schools have conducted one. The internship allows the teachers to teach their students about the culture, and current development of science and technology in the automotive industry.
Liquid waste produced by the leather tanning industry is included in the list of hazardous and to... more Liquid waste produced by the leather tanning industry is included in the list of hazardous and toxic wastes for the environment because it contains one of the chemicals, namely ammonia. The goal of this study was to minimize ammonia levels in tannery effluent by mixing Poly Aluminum Chloride (PAC) and filtering with activated charcoal and zeolite sand. This research method uses a control group and an experimental group with three repetitions for each type of reagent. After treatment, the ammonia content was tested using a Spectrophotometer. The data was examined using SPSS using the Regression Test to see if there was an effect of treatment on ammonia content reduction, and then the Kruskal Wallis Test in order of mean ranking to find the most effective type and level of treatment. The Mann Whitney test was then used to see how the relationship between the variables affected the results. The result was found that the PAC reagent level of 3.5 grams was the most effective in reducing ammonia to below the specified quality standard. Efforts to reduce ammonia are carried out to prevent the impact of ammonia gas which is harmful to human health.
Penelitian ini bertujuan untuk mengetahui persepsi dosen dan mahasiswa terhadap efektivitas pengg... more Penelitian ini bertujuan untuk mengetahui persepsi dosen dan mahasiswa terhadap efektivitas penggunaan teknologi AR untuk industri arsitektur dan jasa konstruksi serta tugas-tugas yang terkait, melalui penggunaan perangkat seluler. Penelitian ini merupakan penelitian deskriptif dengan metode survey. Sampel pada penelitian ini adalah dosen dan mahasiswa program studi arsitektur Sekolah Tinggi Teknologi STIKMA Malang. Instrumen penelitian dikembangkan dari hasil studi literatur dan studi pendahuluan untuk membangun basis pengetahuan dan pemahaman tentang teknologi AR. Kuesioner terbagi menjadi: 1) Informasi Umum: untuk mengidentifikasi latar belakang responden; 2) Pengetahuan tentang AR/VR: untuk menilai pemahaman responden tentang AR; 3) AR di industri konstruksi: untuk mengukur pandangan peserta tentang kesesuaian AR untuk tugas konstruksi; dan 4) Fokus Studi: untuk mengukur kelayakan mengadopsi solusi AR di industri konstruksi. Teknik analisis data menggunakan analisis data kuantitatif dengan pendekatan deskriptif. Hasil penelitian menunjukkan bahwa persepsi terhadap penerapan teknologi AR untuk konstruksi umumnya positif. Anomali tak terduga di sini tampaknya adalah Pendidikan dan Jejaring Sosial hanya 3 dan 4 orang yang percaya bahwa teknologi VR dan AR akan sangat bermanfaat. Teknologi AR akan berguna untuk tugas-tugas konstruksi tetapi akan membutuhkan lebih banyak pekerjaan di beberapa area tertentu (seperti manajemen proyek/lokasi serta inspeksi dan pemeliharaan), jika cakupannya lebih luas dan lebih detail.
Preventia : The Indonesian Journal of Public Health
Nitrogen, phosphorus and potassium concentration in liquid organic fertilizer can be obtained fro... more Nitrogen, phosphorus and potassium concentration in liquid organic fertilizer can be obtained from organic materials. Liquid organic fertilizer can be made from vegetable waste, charcoal, and gold snail (Pomacea canaliculata L.). This study aimed to know the concentration of nitrogen, phosphorus and potassium in liquid organic fertilizers of waste vegetable, charcoal and snail. Methods used to test nitrogen was the Kjeldahl method, while potassium and phosphorus tested with spectrophotometer. The results showed that the concentration of nitrogen, phosphorus and potassium in liquid organic fertilizers of waste vegetable, charcoal and snail were 0,2612 percent; 0,0334 percent; and 0,1421 percent. This concentration didn’t meet the standard of liquid organic fertilizers quality based on MOA No. 70 of 2010 which is 3 until 6 percent.
Pada era revolusi industri 4.0 digitalisasi berkembang berdampak pada industri-industri dalam bid... more Pada era revolusi industri 4.0 digitalisasi berkembang berdampak pada industri-industri dalam bidang fashion. Adanya perkembangan tersebut maka menyebabkan peserta didik di SMK Kompetensi Keahlian Tata Busana mulai diperkenalkan menggunakan software aplikasi dalam membuat produk desain digital. Guru produktif tata busana pada saat ini harus bisa menerapkan konsep virtual reality fashion dengan memanfaatkan software aplikasi sebagai media pembelajaran dalam mengajarkan peserta didik untuk membuat desain berbasis digital. Akan tetapi permasalahan yang ada yaitu masih kurangnya media pembelajaran seperti video tutorial, buku pendamping, dan modul sebagai pendukungnya. Oleh sebab itu, diperlukannya pengembangan media pembelajaran video tutorial dalam membuat virtual reality fashion. Tahapan proses pengembangan media pembelajaran menggunakan metode penelitian R&D dengan mengadaptasi model penelitian dan pengembangan ADDIE yang meliputi lima tahap pengembangan yaitu analysis, design, deve...
Bengkel/laboratorium di Sekolah Menengah Kejuruan masih sebatas sebagai tempat praktik siswa bel... more Bengkel/laboratorium di Sekolah Menengah Kejuruan masih sebatas sebagai tempat praktik siswa belum banyak dimanfaatkan oleh para steak holders. Keberadaan bengkel di Sekolah Menengah Kejuruan sangat penting dalam menunjang kompetensi guru dan siswa yang dapat mempengaruhi kualitas lulusan. Kompetensi yang dimiliki oleh siswa tidak hanya pada penguasaan teori saja, apalagi pada bidang teknik, tetapi harus di padukan antara teori dan praktik. Oleh karena itu maka peran guru menjadi sangat penting dalam penguasaan pengelolaan bengkel. Pelatihan manajemen bengkel bagi guru mata pelajaran praktik di SMK Kota Malang diikuti oleh 30 Orang diselenggarakan oleh Tim Dosen Program Studi Pendidikan Teknik Mesin FT UM.Hasil pelatihan menunjukkan adanya peningkatan pemahaman manajemen bengkel/laboratorium bagi para guru SMK di wilayah Kota Malang, diharapkan kegiatan pembelajaran dibengkel/laboratorium dapat berjalan lebih baik dan dapat meningkatkan prestasi siswa baik dari dimensi pengetahu...
Mutu sekolah kejuruan sangat ditentukan oleh kelengkapan sarana prasarana praktik yang ada dibeng... more Mutu sekolah kejuruan sangat ditentukan oleh kelengkapan sarana prasarana praktik yang ada dibengkel/laboratorium serta kompetensi guru bidang produktif. Keterampilan mengelola bengkel/laboratorium bagi guru SMK akan berdampak pada kelancaran kegiatan pembelajaran, terhindarnya kecelakaan kerja saat kegiatan praktikum, dan berdampak pada mutu lulusan. Pengabdian Masyarakatn ini bertujuan untuk meningkatkan pengatahuan dan keterampiran para guru SMK di Kabupaten Trenggalek dalam pengelolaan dan pengoperasian bengkel guna mencegah kecelakaan kerja. Metode kegiatan yang digunakan meliputi ceramah, tanya-jawab, dan demonstrasi. Peserta pelatihan diwajibkan mengikuti pre-test dan pos-test untuk melihat keberhasilan pelaksanaan pelatihan. Hasil kegiatan menunjukkan bahwa peserta pelatihan mengalami peningkatan pemahaman dan kompetensi manajemen bengkel/laboratorium pendidikan. Kata kunci — kecelakaan kerja, kompetensi guru SMK, manajemen bengkel Abstract The quality of vocational schools...
Uploads
Papers by Djoko Kustono