Papers by Igwe Ogbu Joseph
Journal of Information Engineering and Applications, 2014
This paper compares and analyses the Denial-of-Service attacks in the two different Network archi... more This paper compares and analyses the Denial-of-Service attacks in the two different Network architectures. The two architectures are based on different routing approaches: Hop-by-Hop IP routing and source-routing using Bloom filters. In Hop-by-Hop IP routing, the packet header contains the address, and the route is decided node by node. Forwarding in this method requires a node to have a routing table which contains the port through which the packet should traverse depending on the address of the destination. Instead in source-routing, the forwarding identifier is encoded with the path a packet should take and it is placed in the packet header. The forwarding identifier in this approach does not require a forwarding table for look ups like the IP routing; it relies on Line Speed Publish/Subscribe (LIPSIN) forwarding solution that focuses on using named links not nodes or interfaces. The forwarding identifier encompasses a set of Link ID's which specifies the path to the recipient and they are encoded in a Bloom filter. The In-packet Bloom filters serve as both path selectors and as capabilities, and they are generated dynamically. However, this thesis is going to focus on the latter network technology by looking at both its benefits and drawbacks as well as analysing the possibilities of having a Denial of service attack.
Computer Engineering and Intelligent Systems, 2014
The ability of an application to adapt its behavior to changing network conditions depends on the... more The ability of an application to adapt its behavior to changing network conditions depends on the available bandwidth, throughput, delay and packet loss in a network path. These are of major importance in congestion control, streaming applications, quality of service verification, relay selection and many other areas in WiMAX relay stations. Mobile WiMAX, which is based on the IEEE 802.16e standard, provides support for and enables full mobility to users. In an effort to optimize and enhance the overall network throughput, this paper will propose a mobile relay framework. WiMAX is based on the IEEE 802.16e standard, and can support various types of handovers, while allowing for full mobility from the user endpoint. Different methodologies were used to compare different aspects of WiMAX relay stations including throughput, delay, SNR and network load. OPNET modular was used to develop and measure these set of network performance metrics. To accurately measure and evaluate the aforementioned network parameters we employed techniques that were able to process large amounts of data, this aided in provision of much more informed recommendations as to the type of relay station modes that should be installed engender enhanced, improved and optimal Quality of Service (QoS) within the network perimeter. This paper measured the overall network throughput, delay, SNR and network load of relay networks comprising mainly of multimedia applications.
Innovative Systems Design and Engineering, 2014
For this project, we propose to compare the 802.11g and the 802.11e Wireless Local Area Networks ... more For this project, we propose to compare the 802.11g and the 802.11e Wireless Local Area Networks (WLANs). The 802.11g WLAN standards are good for data applications. However, the 802.11g standard is not wellequipped to deal with the intended delay and bandwidth requirements of multimedia applications, such as video and voice over wireless IP. For this reason, an approved amendment (802.11e) was added to the IEEE 802.11 standard. The 802.11e implements Quality of Service (QoS), which enables features through changes in the Medium Access Control (MAC) layer. The performance of 802.11e will be evaluated using OPNET simulation and compared with the 802.11g WLAN standard.
Uploads
Papers by Igwe Ogbu Joseph