Advances in Materials Science and Engineering, 2022
The rapid advancement of technical advancements has resulted in the generation of substantial amo... more The rapid advancement of technical advancements has resulted in the generation of substantial amount of electronic trash (e-waste). The volume of e-waste created, as well as the presence of both dangerous and beneficial elements, enhances the business potential of recovery and recycling significantly. Waste printed circuit boards (PCBs) include a number of hazardous heavy metals, including copper (Cu), tin (Sn), lead (Pb), and others (Zn, Ni, Fe, Br, Mn, Mg etc.). These discarded metals without treatment threaten the economy, the environment, and human health. Heavy metal recovery from PCBs is a big difficulty for researchers. The present review focuses on technological advances in the recovery of toxic, precious metals from PCBs.
International Journal of Chemical Engineering, 2021
Tobacco, one of the most significant nonfood crops, is critical to agriculture worldwide. The tob... more Tobacco, one of the most significant nonfood crops, is critical to agriculture worldwide. The tobacco processing business creates a significant amount of hazardous tobacco waste containing nicotine, and only a tiny portion of it gets recycled. Nicotine, the primary component of tobacco products such as cigarettes, is an alkaloid and can be used as an insecticide. This research aims to extract nicotine from discarded cigarette butts and utilize it as an insecticide. Extraction, emulsification, and efficiency testing on cabbage aphids are all part of the procedure. The initial extraction tests used a solvent combination of ethanol and methanol in various ratios, with a 3 : 1 ratio yielding the best results. Temperature (30–60°C), extraction length (4–6 hrs), and sodium hydroxide concentration (1–3 M) are the independent variables studied for extraction parameters, and the optimal conditions are determined using Design-Expert, response surface approach central composite design (RSM-CCD...
The drinking water quality was evaluated in order to provide a continuous supply of clean and saf... more The drinking water quality was evaluated in order to provide a continuous supply of clean and safe drinking water for the preservation of public health. The study area consists of three villages: Tulube, Seddo, and Serdo, all of which are located near Mettu town, which is about 550 kilometers south-west of Ethiopia’s capital, Addis Ababa. The physical and chemical parameters of the collected drinking water samples were assessed, including pH, turbidity, conductivity, total suspended solids (TSS), total dissolved solids (TDS), and the presence of heavy metals. The samples were examined in the laboratory, and the findings were compared to the World Health Organization (WHO) standards. Almost all of the physiochemical indicators were safe and within the permissible limit for drinking water quality. However, lead ion concentrations were found to be above the WHO standards. An adsorbent produced from banana pseudostems was used to remove lead ions from drinking water. The equilibrium par...
Advances in Materials Science and Engineering, 2022
The rapid advancement of technical advancements has resulted in the generation of substantial amo... more The rapid advancement of technical advancements has resulted in the generation of substantial amount of electronic trash (e-waste). The volume of e-waste created, as well as the presence of both dangerous and beneficial elements, enhances the business potential of recovery and recycling significantly. Waste printed circuit boards (PCBs) include a number of hazardous heavy metals, including copper (Cu), tin (Sn), lead (Pb), and others (Zn, Ni, Fe, Br, Mn, Mg etc.). These discarded metals without treatment threaten the economy, the environment, and human health. Heavy metal recovery from PCBs is a big difficulty for researchers. The present review focuses on technological advances in the recovery of toxic, precious metals from PCBs.
International Journal of Chemical Engineering, 2021
Tobacco, one of the most significant nonfood crops, is critical to agriculture worldwide. The tob... more Tobacco, one of the most significant nonfood crops, is critical to agriculture worldwide. The tobacco processing business creates a significant amount of hazardous tobacco waste containing nicotine, and only a tiny portion of it gets recycled. Nicotine, the primary component of tobacco products such as cigarettes, is an alkaloid and can be used as an insecticide. This research aims to extract nicotine from discarded cigarette butts and utilize it as an insecticide. Extraction, emulsification, and efficiency testing on cabbage aphids are all part of the procedure. The initial extraction tests used a solvent combination of ethanol and methanol in various ratios, with a 3 : 1 ratio yielding the best results. Temperature (30–60°C), extraction length (4–6 hrs), and sodium hydroxide concentration (1–3 M) are the independent variables studied for extraction parameters, and the optimal conditions are determined using Design-Expert, response surface approach central composite design (RSM-CCD...
The drinking water quality was evaluated in order to provide a continuous supply of clean and saf... more The drinking water quality was evaluated in order to provide a continuous supply of clean and safe drinking water for the preservation of public health. The study area consists of three villages: Tulube, Seddo, and Serdo, all of which are located near Mettu town, which is about 550 kilometers south-west of Ethiopia’s capital, Addis Ababa. The physical and chemical parameters of the collected drinking water samples were assessed, including pH, turbidity, conductivity, total suspended solids (TSS), total dissolved solids (TDS), and the presence of heavy metals. The samples were examined in the laboratory, and the findings were compared to the World Health Organization (WHO) standards. Almost all of the physiochemical indicators were safe and within the permissible limit for drinking water quality. However, lead ion concentrations were found to be above the WHO standards. An adsorbent produced from banana pseudostems was used to remove lead ions from drinking water. The equilibrium par...
Uploads
Papers by Badhane Gudeta