Papers by Library for Science AND Technology. (FREE ARCTICLE FOR SCIENCE)
Research on Crops, 2017
This study aimed at determining the effects of growth medium and planting density on lettuce (Lac... more This study aimed at determining the effects of growth medium and planting density on lettuce (Lactuca sativa L.) production under a closed soilless system. Soilless lettuces were produced during autumn season of 2012-13, that were tested under three different growth media and two planting densities (16 and 33 plants/m2). The highest head mass and marketable head mass (0.640 and 609 kg) were obtained at planting density (16 plants/m2). When analyzed for interaction between the growth medium and planting density, the higher head mass (691 and 697 g) was obtained between the interactions Tuff br : peatmoss and Tuff br with planting density of 16 plants/m2. The results showed that planting density and growth medium exhibited significant effects on stem weight (g), weight of leaves (outer+inner) (g), number of non-consumable leaves, number of outer leaves, number of inner leaves, total number of leaves, marketable head mass (g), head mass (g) and plant height (cm). In conclusion, the substrates interference with the development of lettuce plants, it was Tuffbr : Peatmoss and Tuff brown which provided the best plant growth.
In recent years, the recirculating aquaponics system has gained high attention and significant po... more In recent years, the recirculating aquaponics system has gained high attention and significant popularity for organic vegetables and fruits production which contributes to the sustainable aquaculture for tropical regions. This review aims to summarize the possibility for practicing intercropping in aquaponics to produce high-quality fruits, vegetables and fish without any chemical fertilizer and minimum ecological impact for a sustainable agriculture. Although many studies have addressed about aquaponics for producing high-value crops such as tomato, cucumber, and lettuce, there is still a lack of complete information to support the development of intercropping in aquaponics and limited focus on its commercial implementation. Moreover, this study will focus first on the requirements for inserting intercropping in aquaponics and technical improvements needed to adapt as potential for sustainable food production system to increase productivity around the world, especially in countries...
Australian Journal of Basic and Applied Sciences, 2020
Various authors have studied the background behind the anatomical abnormalities of duodenum such ... more Various authors have studied the background behind the anatomical abnormalities of duodenum such as atresia, stenosis, and the difference in shape, but the studies concerning the presence of Duodenojejunal junction (DJJ) are rare. Few authors described this junction in detail i.e., the Duodenojejunal junction (DJJ) pressure got reduced on duodenal muscular activity whereas it got augmented on jejunal muscular activity. These results suggested possible reality and the presence of anatomical sphincter at DJJ. Methods: DJJ was studied through direct dissection of 20 cadavers whereas the specimens were histologically examined and stained with H&E stain. While the radiological examination was performed for another 10 cadaveric specimens using plain X-ray technique. Barium was injected into the pyloric canal and a tie was applied into the jejunum so that it allows only the barium is present in the duodenum, DJJ and at a few centimetres of jejenum. Transverse and longitudinal sections through DJJ were incised and stained by H&E stains. Results: DJJ was narrower and more contracted than duodenum or jejunum. It also possessed one or two depressions and covered by arterial branch that originated from superior mesenteric artery termed as ‘duodenojejunal junction artery’. DJJ was felt by touching and found to be thicker and tough than duodenum or jejunum. Its mucous membrane lining was packed into ‘DJJ rosette’. The length of DJJ among adults is in the range of 0.6–1.2 cm. The circular muscle layer was found to be clearly thickened at the junction when examined using microscope. Further, the longitudinal muscle coat was also very thick at the junction when compared with the same coat in duodenum or jejunum radiologically. DJJ was found to be narrower and constricted whereas duodenum was wide. Jejunum was similar to duodenum. Conclusion: The thickened tough circular muscle, mucosal rosette packing and narrowing and contraction at DJJ refer to the possible presence of anatomical real sphincter at DJJ which got augmented when high-pressure is applied in this area. So, the corresponding results suggest and support the study hypothesis
Australian Journal of Basic and Applied Sciences, 2020
The canola plant has as one of its jobs, the usage as a cover plant, although substances present ... more The canola plant has as one of its jobs, the usage as a cover plant, although substances present in this vegetable, such as glucosinolates, are known for exerting a negative effect in the succession culture. This way, the present work aimed to evaluate the allelopathy effect of aqueous extract of canola (Brassica napus) on the quinoa seeds (Chenopodium quinoa) in vitro; verifying the possibility of a rotation in such species. The used experimental outline was the on e entirely randomized, with four repetitions. The treatments were: concentrations of 1, 2.5, 5 and 10% of aqueous extract of canola and witness with distilled water, conducted in gerbox boxes, containing germitest paper with 25 seeds in each box, under the temperature of 25 1°C. Daily counting of the germinated seeds has been carried out in an eight-day period. At the end of this period, germination speed index, percentage of germination, vigor, average speed of germination and average time of germination were all analyzed. The data were submitted to the Lillifors normality test, not having the need for a transformation, the averages were compared by the Tukey Test (P≤0,05), through the computerized application WinSTAT®. The aqueous extract of canola affected negatively the germination variables of quinoa seeds
To Cite This Article: Kouloughli Imen and Berber Sihem, Sari Zaki., Validation of single and doub... more To Cite This Article: Kouloughli Imen and Berber Sihem, Sari Zaki., Validation of single and double cycle models and Performance evaluation of a multi-aisle AS / RS. Aust. In this paper we are interested in multi aisle automated storage/retrieval system (AS/RS). Multi-aisle AS/RS is characterized by aisle used for circulation for a single storage/retrieval machine. The aim of the work is to simulate a multi-aisle AS/RS to evaluate the cycle time and to compare the results obtained with the analytical results. In this paper we are interested in multi aisle automated storage/retrieval system (AS/RS). Multi-aisle AS/RS is characterized by aisle used for circulation for a single storage/retrieval machine. The aim of the work is to simulate a multi-aisle AS/RS to evaluate the cycle time and to compare the results obtained with the analytical results.
The present study focused on the synthesis of silver nanoparticles using the ethanolic extract of... more The present study focused on the synthesis of silver nanoparticles using the ethanolic extract of Jania rubens (Linnaeus) J.V. Lamouroux. The synthesized silver nanoparticles were characterized by UV-Vis spectra, TEM and FT-IR analysis. The formation of silver nanoparticles by Jania rubens showed the absorbance peak values at 350. The FT-IR spectrum exhibit a presence of bands at about 2418.3, 1994.03, 1909.18, 1841.6, 1769.37, 1719.44, 1641.13 and 1559.17cm1. TEM analysis exhibited a large and small spherical and rod particles. The chemical constituents, of Jania rubens extracts, were identified by GC-MS. In vivo experiment was conducted to test anti-nephrotoxicity of silver nanoparticles prepared by Jania rubens caused by gentamicin (GM). Additionally, a histopathological assessment in liver and kidney of the treated rats indicated the potentiality of Jania rubens nanoparticles to prevent the nephrotoxicity.
Iraq as a developing country tried to take advantage of advances in information and communication... more Iraq as a developing country tried to take advantage of advances in information and communications technology to provide safe and high-quality services to the citizens. Based on the advantage of the new communication technologies, Dhi-Qar local government sought to implement and adopt these technologies in the public sector. Regrettably , since 2003 most of the electronic services initiatives have been neglected or have not been used. In fact, pre-implementation (adoption) is essential for successful electronic health implementations. Serving patients in the hospitals through an integrated electronic Health system requires an understanding of the behavior of the Health workers (such as Nurse and Doctors) as well as the factors that influence their acceptance and usage of technology. Thus this study is intended to identify the main factors affecting on the adoption of the electronic health record in Iraq. The study will examine user acceptance and use of technology, in the Technology Acceptance Model (TAM). The quantitative method is the main approach of collecting the raw data from the respondents. This study concentrates on the staff who works in the main hospital in Dhi-Qar because this province is the first local province that implemented many electronic projects. A total of eight questionnaires were distributed but only 61 questionnaires were returned. As for the data analysis, the present study used second generation technique (Partial Least Squares) to analyze the self-administration questionnaire as well as use SmartPLS V.3 as an instrument. The results indicated that there is a significant relationship between Ease of Use-> Usefulness, Usefulness-> Attitude, and Attitude-> Adoption of EHR. The results also showed that influence demographic do not influence on the adoption of EHR among health workers in Dhi-Qar Hospital. These finding may help decision makers in Iraq government to improve future implementation of e-health services.
As a result of repeated terrorist incidents around the world causing huge loss of property and hu... more As a result of repeated terrorist incidents around the world causing huge loss of property and human lives. While the threat of a conventional explosion charge is defined by two equally important elements, the charge quantity (weight), the standoff distance between the blast source and the target. Furthermore, most casualties and injuries sustained during explosions are not only caused by the pressure or heat resulting from a charge detonation. But also, by fragmentation of walls, shattering of windows, and non-secured objects that are propelled at high velocities by the blast. Thus, protection of critical structures against blast load has become a critical issue. The research objectives were to increase the building impulsive capacity against a blast load that is applied on their facade without any modification in the building structure; these objectives were achieved using a protective panel as a barrier between the blast load and the building. Herein the research considered a study to achieve a panel design that could prevent a blast wave from reaching the building structure and minimizing the pressure behind the panel, besides a withstanding panel against consecutive explosions after the main blast. Furthermore the research investigate the alternation of design parameters to achieve the desired panel design including the filling material, thickness of panel's plates and separation distance between the front and rear plates. This paper includes six different models to be tested against a breaching charge of 50 kg of TNT at 1m standoff distance. The design of Protective panels consists of two steel plates with 350 mm gap. The structural design of the panel includes plate thickness, distance between front and back plate and filling material. Various panel designs were examined with and/or without different filling materials. Moreover, strengthen mechanism is implemented for plates using shear connectors and horizontal stiffeners. Panel design approach is accomplished using the finite element analysis through ANSYS AUTODYN. Eventually, the first three models have a large deformation, while the fourth and fifth model resulted in a medium deformation, finally, the sixth model resulted in a significant small deformation recorded 64mm; this model is committed as the most suitable panel design for protecting building against blast load. In conclusion the deformation decrease through the increase of plate thickness and the usage of concrete as filling material, as well as the strengthen mechanism using horizontal plates.
Computer control labsat Palestine Polytechnic university consists of different control plants inc... more Computer control labsat Palestine Polytechnic university consists of different control plants including 3DOF linear systems, also single, and double inverted pendulums. For the educational need of applying control techniques on parallel robots; Delta robot is to be implemented. A 3DOF Delta robot is implemented to provide 3 translational motions in à µÃ±¥à µÃ±¦à µÃ± § directions. The design itself is considered to fit well in lab environment and support future educational use. Different design issues are also tackled including choosing the right dimensions of connecting links, end effecter, and robots upper plate and choosing the appropriate joints. Independent joint control technique was used to move end effector to a desired position. Robot is first modeled through SOLIDWORKS computer aided design software. Further, Different analysis are done including design, and workspace analysis. Delta robot is then provided with different interacting elements including keypad, LCD display, and computer GUI; so students can interact easily with the robot. Design elements are made available openly for students to reach and work through so they can understand, interact, and apply knowledge and techniques on the robot.
In this paper, a novel design of a Stewart-like platform is introduced with the purpose of testin... more In this paper, a novel design of a Stewart-like platform is introduced with the purpose of testing humanoids postural capabilities. It performs three motions including surge (forward-backward), heave (up-down), and pitch (tilting). The suggested novel design is inspired from Stewart platform, a kind of parallel manipulator, distinguished for its high stability, and rigidity, but a narrower workspace compared to serial manipulators. Stewart platform provides six degrees of freedom, which are more kinds of motions than needed for testing humanoids balance. For this, Stewart platform is optimized to perform required motions to test humanoids balance of surge, heave, and pitch, by reducing the numbers of actuators from six to four, and re-configuring joints and links connecting the platform to its fixed base. While four actuators are sufficient for three degrees of freedom, 4 th actuator was added for wider stability range, which adds the possibility for 4 th motion of rolling. Mathematical analyses are conducted for the suggested novel design including kinematics, Jacobians, and dynamic modeling using both Lagrange formulation and Newton Euler methods, those analysesare based on the side view projection of the platform. Different control techniques were considered including model based controller, and independent joint controller. MATLAB Simulink was the software environment simulation has been conducted in, where S-function tool is used to replace the plant through its derived dynamic equations for the purpose of testing model based controller. CATIA software was used to 3D model the new design, and to manipulate its parts observing its motion. CATIA was also used to conduct structural analysis of the platform.A prototype has been built and controlled to demonstrate the new design performing surge, heave, and pitch motions.Prototype has shown high rigidity, and high stability. The new design can be considered for various types of applications other than testing humanoids balance, including simulators,and machining technologies.
The aim of the present study was to determine the quality of surface water resources of
Balkan ... more The aim of the present study was to determine the quality of surface water resources of
Balkan Arboretum Area located in
Trakya University including Güllapoğlu Stream
(lotic part) and Artificial Pond (lentic part). Total of 9 parameters including total
dissolved solids (TDS), salinity, electrical conductivity (EC), pH, turbidity, sulphate
(SO4), nitrite (NO2), nitrate (NO3)
and phosphate (PO4) were investigated in surface
water samples, which were collected monthly from Güllapoğlu Stream and Artificial
Pond between the dates of January 2016
–
December 2016. The detected results were
evaluated according to the surface water q
uality criteria specified by SKKY (Water
Pollution Control Regulation in Turkey) and evaluated as drinking water quality criteria
specified by TS266 (Turkish Standards Institute), EC (European Communities) and
WHO (World Health Organization).
This study investigated teacher's perceptions on the use of total communication technique in teac... more This study investigated teacher's perceptions on the use of total communication technique in teaching students with hearing impairment in inclusive classrooms in Enugu State, Nigeria. The study adopted descriptive survey design using a population of 47 teachers. Three research questions and three hypotheses guided the study. The instrument for data collection was Total Communication Questionnaire (TCQ). Data collected were analyzed using mean, standard deviation and student t-test. Findings of the study showed that teachers perceived the use of Total communication as a technique that would improve the academic progress of SHI in schools. But most of the teachers found the technique difficult to use, they need time and training to apply the technique. In light of the findings, the researchers recommend that the institutions that prepare teachers should train teachers on this technique in order to improve their performances in the school.
BACKGROUND: Robust methods aim to achieve robust performance and/or stability in the presence of ... more BACKGROUND: Robust methods aim to achieve robust performance and/or stability in the presence of bounded modeling errors.OBJECTIVE: dual problem in which uncertainty enters a filter at the plant output.RESULTS: A solution to this problem could be obtained, when parametric uncertainties are involved and a class of static multipliers is used. In view of the fact that the general robust output feedback problem is largely open, it is a challenging research question which kind of interconnections of uncertain systems can be handled by convex optimization in the LMI framework.CONCLUSION: It is found that the only structural property needed for a synthesis solution to exist in terms of LMIs, is the fact that the transfer matrix from control input to measurement output is not affected by uncertainty.
Vital., Irrigated beans under no-tillage and conventional cultivation systems. Aust. Common bean ... more Vital., Irrigated beans under no-tillage and conventional cultivation systems. Aust. Common bean (Phaseolus vulgaris L.) stands out as one of the main crops produced in Brazil, an agricultural product extremely appreciated by Brazilians. Planting of crops associated with irrigation is a viable alternative, among cultural practices, in improving productivity. The objective of this study was to verify the effect of the presence and absence of dead cover (surface straw) and of different irrigation slides on the development and productivity of the bean crop. The soil used does not present evident erosion, with very small granular structure, very porous, soft, friable, plastic and sticky, excessively drained consistency, being classified as Red Latosol Eutrophric typical clay texture. The experimental design was divided into subdivided plots, with four replications, with two plots with and without mulch on the surface, and subplots with 5 irrigation slides: 25, 50, 75, 100 and 125% of daily real evapotranspiration. To evaluate the productive agronomic characteristics, only the two central rows of each plot were considered as useful area, scoring 0.5m at each end. The evaluated parameters were: fresh mass, number of grains, number of pods, mass of 100 grains, production. Quantitative data were submitted to analysis of variance (ANOVA), followed by regression analysis. Conventional planting presented lower results than no-tillage in the characteristics evaluated, except for the production that obtained very similar values in both systems of planting. The no-tillage system provided better yields for the bean development, so that 100% irrigation would be recommended for the farmer.
BACKGROUND: Artificial insemination represents one of the most applicable technologies in cattle ... more BACKGROUND: Artificial insemination represents one of the most applicable technologies in cattle breeding. Semen quality post cryopreservation have been associated with many factors such as impending storage intervals, source of sperm, cryopreservation protocol and the most important is the type of extenders used. OBJECTIVE: This study aimed to evaluate the extending capacity of four different types of extenders namely, AndroMed ®, BioXcell ®, Triladyl® and Tris-egg yolk in terms of motility, viability, morphology, DNA integrity, plasma membrane integrity and acrosome integrity of post-thawed bull sperms. Three healthy matured Brangus-Hereford bulls were selected for this study. MATERIALS AND METHODS: Twenty four semen samples were collected using an automatic electro-ejaculator and semen quality was analysed using Computer Assisted Semen Analyser (CASA). Eosin-Nigrosin (EN) staining technique was applied to evaluate the morphology, viability and acrosome integrity whilst sperm DNA integrity was evaluated using modified acridine orange stain and hypo-osmotic swelling test was applied to evaluate sperm plasma membrane integrity. RESULTS: Amongst the four extenders, AndroMed ® resulted in superior extending capacity to sperm motility, morphology, DNA integrity, plasma membrane integrity and acrosome integrity. BioXcell ® and Tris-egg yolk extenders had the highest capacity to protect sperm viability. Triladyl ® showed lowest extending potential capacity to bull sperm. CONCLUSION: From the present study, AndroMed ® can be considered as the best suitable extender for bull sperm cryopreservation. BioXcell®, Triladyl® and Tris–egg yolk based extender can be still applied, but there is a need for more studies in future to improve their extending potential capacity.
Aegiphila sellowiana is a pioneer useful to restore locations affected by human action, because i... more Aegiphila sellowiana is a pioneer useful to restore locations affected by human action, because it grows fast and produces fruits for birds' consumption. Due its low germination rates, BOD experiments were conducted and in a greenhouse, using seeds deriving from red fruits in an entirely random design, aiming to maximize species germination rates and include it in the damaged areas restoration programs. Seeds immersion in sodium hypochlorite 2% during two minutes was efficient to allow germination in laboratory. Quality seedlings formation is obtained in the cattle manure subtract, which enabled higher growth rates.
Background: Federal transfers in the Sudan are a key to reducing regional disparities and address... more Background: Federal transfers in the Sudan are a key to reducing regional disparities and addressing marginalization. While more resources have been directed to the sub-national levels since the adoption of the federal system in 1991, the lack of transparency and predictability surrounding these transfers has undermined the role of federal transfers to promote regional convergence and reduce financial inequality. Objective: The objective of this the paper is to contribute to the efforts of designing a transparent transfer formula that enables an efficient and equitable distribution of federal fiscal fund between the states. Accordingly, different approaches for constructing different indexes to account for state expenditure needs and state fiscal capacity, and for equalization of the states' fiscal gap, are outlined. Based on these constructed indexes, the study suggested alternative simulations of equalization transfers using both fiscal needs and fiscal capacity to measure the fiscal gap so as to mitigate the disparities among states. Results: The results of the simulations, and Lorenz curve ranking and Gini Coefficient index, suggest that the government should base the transfer program on the fiscal gap measured by the difference between states fiscal needs, approximated by an augmented state needs index, and the state fiscal capacity, approximated by a poverty index. Conclusion: The recommended scenario is found to reduce the fiscal inequality between the states to its narrowest and results in conspicuous welfare improvement, compared with the currently used formula distribution.
The process of discovering interesting and useful patterns and relationship in large volume of da... more The process of discovering interesting and useful patterns and relationship in large volume of data is known as data mining. In real world applications, a data mining process can be phased as data understandings, data preparation, modeling, evaluation and in Database (KDD) (X. Li et al., systematically and identify best practices to improves care and reduce cost (Peng Y computer technology plays an important role in prediction of surgical procedures, medical tests, medications and discovery of relationship between pathological data and clinical data, finding malignant tumors in different organs of body (A.Oztekin et al., 2009; K. Imran mining for healthcare and biomedical is increasing day by day (J.M.Renders and T.Simonart, 2009) Skin is the biggest organ of the body which covers an agg grown-up. It is the main line of protection against microorganisms and harm and frequently mirrors the general strength of the body. The most common disease comes under dermatology are Acne, A B S T R A C T Background: The purpose of the paper is to analyze Erythemato using data mining technique. Identification of different Erythemato troublesome issue in dermatology. This is the case with Lichen planus, Pityriasis rosea, Pityriasis rubra pilaris, Psoriasis, Seboreic dermatitis and Cronic dermatitis. Since, all side-effects share the clinical component of erythema and scaling with extremely edge contrast at the initial stage. Clinical evaluation is done for 12 features at the beginning stage and the skin samples are considered for the evaluation of 22 histopathological features. Objective: The motivation behind the research work is to demonstrate the consequence of data mining algorithms which have only clinical feature as input in helping the physician to categorize six different types of Erythemato and also to achieve accurate prediction connected on clinical dataset of Erythemato Squamous disease from UCI (University Of California, Irvine) machine repository. Results: The current research focused on using Bagging, Bayesian network, Support Vector Machine (SVM), Logic boost, Multilayer Perceptron (MLP), Random Forest, J48 data mining classifier for the prediction of the disease. of experimental evaluation, it is observedthat Bayesian Network and Logic Boost algorithms were able to classify the diseases with the accuracy of 83.6% and 84.5. Hence Bayesian Network and Logic Boost algorithms were giving better accuracy than other data mining classification.
Background: Growth of population number and industrial units in parallel of increase of terrestri... more Background: Growth of population number and industrial units in parallel of increase of terrestrial, maritime and air transports are indicators of a pressure on the environment in particular on the air quality. The intense human activity added to the natural activity leads to the generation of aerosols which are composed of particles of very varied sizes. In particular, fine dust which constitutes a significant factor of pollution involving a deterioration of the air quality. The urban zone needs clean air to assure a public health. To achieve this goal, we need to enrich our knowledge on the sources and the impacts of the atmospheric pollutants. Understanding the sources, the composition and the mode of transformation of the atmospheric pollutants is the first step in air quality monitoring. Methods: The study and control can be achieved by using adequate nuclear techniques analyses. The aim of this work is to study air pollution in urban zone of Algiers for the evaluation of the contents of heavy metals in various selected sites. A sampling campaign was carried out during period 2005/2007 in three sites in the Algiers city: Bab El-Oued the High Casbah and Mustapha Bacha. In order to identify and quantify their concentrations, nuclear techniques such PIXE (Proton Induced X-ray Emission), ED-XRF (Energy Dispersive X-ray Fluorescence) and the INAA (Instrumental Neutron Activation Analysis) are used in this study. These techniques are powerful tools used in air pollution monitoring for the determination of trace heavy metals. We identified at the same time 18 elements (Results: the concentrations of the elements Hg, Co, Ni, Cr and Ag vary around 2 ng/m 3. The concentrations of element Zn vary over a wide range from 3 ng / m 3 to more than 500 ng / m 3. A large values of Pb were measured (5000 ng/m 3 , 8000 ng/m 3) and 200 ng/m 3 for Cu. The element Fe appears in all analyzed filters. The concentrations range from low level to high level (8000 ng/m 3). Conclusion: the high level measured concentrations show the significant air pollution in urban areas. The major emission sources identified were classified as sea spray (SS), suspended soil and vehicle emissions (vehicle emission VE, diesel and petrol). This analysis allowed us to deduce some significant sources affecting the receptor sites. Among these pollutants one finds heavy metals contained in the suspended matter.
Background: Good environmental conditions are needed to support sustainable to development in ord... more Background: Good environmental conditions are needed to support sustainable to development in order to maintaining ecological processes, the availability of sufficient resources, social, economic, and environment as appropriate (Soemarwoto, 2001). In the present, a lot of bad effects in the airport because of weak management. One of bad effect is polluted air and water. Objective: This paper will explain about the operational of enclave civil airport based on sustainable development from environment aspect in Halim Perdanakusuma airport. Method: This study use qualitative method by etnomethodological application. The data obtained from planning document, report, statistic, interview, and others related with airport and regional planning. Results: This paper have some results: 1) The great population around the airport which has potential by aircraft maneuver, it will affect environmental management in the area, 2) By observation, the environmental impact management of airport operation have been done properly and scheduled, 3) There no complaints from the public about the noise and environmental pollution caused by airport operations, 4) There is no plan to plant trees around the safe zone for flights. Conclusion: The environment and ecosystems around the airport are well preserved, but the social effect should be anticipated to prevent social effect.
Uploads
Papers by Library for Science AND Technology. (FREE ARCTICLE FOR SCIENCE)
Balkan Arboretum Area located in
Trakya University including Güllapoğlu Stream
(lotic part) and Artificial Pond (lentic part). Total of 9 parameters including total
dissolved solids (TDS), salinity, electrical conductivity (EC), pH, turbidity, sulphate
(SO4), nitrite (NO2), nitrate (NO3)
and phosphate (PO4) were investigated in surface
water samples, which were collected monthly from Güllapoğlu Stream and Artificial
Pond between the dates of January 2016
–
December 2016. The detected results were
evaluated according to the surface water q
uality criteria specified by SKKY (Water
Pollution Control Regulation in Turkey) and evaluated as drinking water quality criteria
specified by TS266 (Turkish Standards Institute), EC (European Communities) and
WHO (World Health Organization).
Balkan Arboretum Area located in
Trakya University including Güllapoğlu Stream
(lotic part) and Artificial Pond (lentic part). Total of 9 parameters including total
dissolved solids (TDS), salinity, electrical conductivity (EC), pH, turbidity, sulphate
(SO4), nitrite (NO2), nitrate (NO3)
and phosphate (PO4) were investigated in surface
water samples, which were collected monthly from Güllapoğlu Stream and Artificial
Pond between the dates of January 2016
–
December 2016. The detected results were
evaluated according to the surface water q
uality criteria specified by SKKY (Water
Pollution Control Regulation in Turkey) and evaluated as drinking water quality criteria
specified by TS266 (Turkish Standards Institute), EC (European Communities) and
WHO (World Health Organization).