Currently, there is a lack of affordable and simple tools for the estimation of these costs, espe... more Currently, there is a lack of affordable and simple tools for the estimation of these costs, especially for machining operations. This is particularly true for manufacturing SMEs, in which the cost estimation of machined parts is usually performed based only on required material for part production, or involves a time-consuming, non-standardized technical analysis. Therefore, a cost estimation tool was developed, based on the calculated machining times and amount of required material, based on the final drawing of the requested workpiece. The tool was developed primarily for milling machines, considering milling, drilling, and boring/threading operations. Regarding the considered materials, these were primarily aluminum alloys. However, some polymer materials were also considered. The tool first estimates the required time for total part production and then calculates the total cost. The total production time is estimated based on the required machining operations, as well as drawin...
The automotive industry is one of the driving forces of the global industry; thus, it is a very c... more The automotive industry is one of the driving forces of the global industry; thus, it is a very competitive sector which creates a constant need for process improvement, regarding productivity, quality, and flexibility. Automation has proven to be a viable solution for these production problems, with the rising adoption of these automated system by companies that try to design and implement more flexible systems, while reducing costs and improving process quality. Furthermore, the use of automation reduces the manpower factor and its associated variability. In the present work, a new concept for a Bowden cable production process is presented by employing the design science research (DSR) methodology. The project starts with the analysis of the previous production concept, determining possible problems and improvements, as well as setting objectives/requirements for a possible new concept/equipment. This information was used to develop a new automated Bowden cable production equipmen...
The automotive industry is a pioneer in solutions that meet market expectations. However, in the ... more The automotive industry is a pioneer in solutions that meet market expectations. However, in the automotive industry, some less environmentally friendly technologies are still used, such as electroplating. Due to legislative restrictions in several countries, thin coatings made in a vacuum have been replacing coatings traditionally made by electroplating, mainly in decorative terms. This work is more focused on the use of these coatings made in vacuum for optical applications, namely on headlights and exterior backlit components. Although these components are protected during the period of use, there may be situations of contact during the assembly of the components or their repair, necessary to safeguard and to ensure that these coatings have the scratch and wear resistance needed to withstand any treatment deficiency during the operations referred to above. Therefore, this work is essentially focused on the study of the wear resistance of Cr coatings made by PVD (Physical Vapour D...
O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para... more O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para... more O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para... more O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significa... more PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significance in the last two decades with the mandatory shift from electrodeposition processes to clean deposition processes due to environmental, public safety, and health concerns. Due to the frequent use of coatings in several industrial sectors, the importance of studying the chromium coating processes through PVD–sputtering can be realized, investing in a real alternative to electroplated hexavalent chromium, usually denominated by chromium 6, regularly applied in electrodeposition processes of optical products in the automotive industry. At an early stage, experimental tests were carried out to understand which parameters are most suitable for obtaining chromium coatings with optical properties. To study the coating in a broad way, thickness and roughness analysis of the coatings obtained using SEM and AFM, adhesion analyzes with the scratch-test and transmittance by spectrophotometry were ...
Currently, there is a lack of affordable and simple tools for the estimation of these costs, espe... more Currently, there is a lack of affordable and simple tools for the estimation of these costs, especially for machining operations. This is particularly true for manufacturing SMEs, in which the cost estimation of machined parts is usually performed based only on required material for part production, or involves a time-consuming, non-standardized technical analysis. Therefore, a cost estimation tool was developed, based on the calculated machining times and amount of required material, based on the final drawing of the requested workpiece. The tool was developed primarily for milling machines, considering milling, drilling, and boring/threading operations. Regarding the considered materials, these were primarily aluminum alloys. However, some polymer materials were also considered. The tool first estimates the required time for total part production and then calculates the total cost. The total production time is estimated based on the required machining operations, as well as drawin...
The automotive industry is one of the driving forces of the global industry; thus, it is a very c... more The automotive industry is one of the driving forces of the global industry; thus, it is a very competitive sector which creates a constant need for process improvement, regarding productivity, quality, and flexibility. Automation has proven to be a viable solution for these production problems, with the rising adoption of these automated system by companies that try to design and implement more flexible systems, while reducing costs and improving process quality. Furthermore, the use of automation reduces the manpower factor and its associated variability. In the present work, a new concept for a Bowden cable production process is presented by employing the design science research (DSR) methodology. The project starts with the analysis of the previous production concept, determining possible problems and improvements, as well as setting objectives/requirements for a possible new concept/equipment. This information was used to develop a new automated Bowden cable production equipmen...
The automotive industry is a pioneer in solutions that meet market expectations. However, in the ... more The automotive industry is a pioneer in solutions that meet market expectations. However, in the automotive industry, some less environmentally friendly technologies are still used, such as electroplating. Due to legislative restrictions in several countries, thin coatings made in a vacuum have been replacing coatings traditionally made by electroplating, mainly in decorative terms. This work is more focused on the use of these coatings made in vacuum for optical applications, namely on headlights and exterior backlit components. Although these components are protected during the period of use, there may be situations of contact during the assembly of the components or their repair, necessary to safeguard and to ensure that these coatings have the scratch and wear resistance needed to withstand any treatment deficiency during the operations referred to above. Therefore, this work is essentially focused on the study of the wear resistance of Cr coatings made by PVD (Physical Vapour D...
O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para... more O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para... more O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para... more O editor não permite o depósito e disponibilização em acesso aberto do PDF que solicita. Para consultar o documento deve aceder ao endereço do editor.
PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significa... more PVD (physical vapor deposition) and CVD (chemical vapor deposition) have gained greater significance in the last two decades with the mandatory shift from electrodeposition processes to clean deposition processes due to environmental, public safety, and health concerns. Due to the frequent use of coatings in several industrial sectors, the importance of studying the chromium coating processes through PVD–sputtering can be realized, investing in a real alternative to electroplated hexavalent chromium, usually denominated by chromium 6, regularly applied in electrodeposition processes of optical products in the automotive industry. At an early stage, experimental tests were carried out to understand which parameters are most suitable for obtaining chromium coatings with optical properties. To study the coating in a broad way, thickness and roughness analysis of the coatings obtained using SEM and AFM, adhesion analyzes with the scratch-test and transmittance by spectrophotometry were ...
Uploads
Papers by Arnaldo Pinto