Papers by Abdullatif Al-Shuhail
Applied Sciences
Seismic reflection utilizes sound waves transmitted into the subsurface, reflected at rock bounda... more Seismic reflection utilizes sound waves transmitted into the subsurface, reflected at rock boundaries, and recorded at the surface. Interpretation of their travel times and amplitudes are the key for reconstructing various geomorphological features across geological time (e.g., reefs, dunes, and channels). Furthermore, the integration of surface geomorphology technique mapping, such as digital elevation models, with seismic geomorphology can increase land and marine feature modelling and reduce data uncertainty, as well. This paper presents an overview of seismic and surface geomorphology techniques and proposes an integrated workflow for better geological mapping, 3D surface imaging, and reconstruction. We intend to identify which techniques are more often used and which approaches are more appropriate for better output results. We noticed that an integration of surface and subsurface geomorphology techniques could be beneficial for society in landscape mapping, reservoir character...
Journal of Petroleum Exploration and Production Technology
This research aims to characterize reservoir properties by applying rock physics and AVO analysis... more This research aims to characterize reservoir properties by applying rock physics and AVO analysis followed by pre-stack inversion. Two approaches are investigated: One approach addresses the case in which there are wells and seismic data, and the other addresses cases where only seismic data are available. The former approach is achieved by using well-log cross-plots for rock physics modeling to determine the feasibility and pay zone through gas fluid substitution followed by AVO analysis. Pre-stack inversion is then used to predict porosity and gas saturation. In the second approach, a synthetic seismogram is generated and compared to the observed seismic trace at the location of interest by forward modeling P-wave interval velocity and density. The best-matching P-wave velocity and density are subsequently used to generate synthetic well logs at the same location. Pre-stack inversion is then performed on these synthetic wells to predict porosity and gas saturation. Property predic...
Sustainability
The authors would like to make the following corrections to the published paper [...]
Energies
Analysis of amplitudes of transmitted waves (TAVO) is an extension of the conventional AVO analys... more Analysis of amplitudes of transmitted waves (TAVO) is an extension of the conventional AVO analysis using amplitudes of reflected waves. In this study, we introduce the common transmission point (CTP) gather, which is a new domain that is convenient for TAVO analysis. A CTP gather is formed by binning traces that have the same transmission point across a layer interface. We use the proposed domain to invert the ratios Δαα, Δρρ, Δββ, and βα in a model consisting of a gas channel nestled within an oil reservoir. The TAVO equations are fitted to amplitudes calculated by Zoeppritz equations within CTPs inside and outside the channel. Within each CTP gather, we use all traces with incidence angles less than 90% of the critical angle (if any) as TAVO approximations break down beyond this point. The proposed CTP TAVO analysis method estimated Δαα, Δρρ, Δββ, and βα in the gas channel within 1% of their corresponding true values.
Day 1 Mon, February 21, 2022, 2022
Geophysical inversion is usually carried out to quantitatively analyze the earth model and estima... more Geophysical inversion is usually carried out to quantitatively analyze the earth model and estimate its physical properties. Successful delineation of these properties such as layer boundaries, or other near-surface structures are crucial to understand the near-surface inhomogeneity. In this study, we focus on the use of joint inversion of seismic refraction and geoelectrical resistivity datasets using local and global optimization methods. The idea is to integrate the two optimization techniques to minimize the challenges faced by each algorithm when applied alone. This hybrid algorithm (local and global) is applied on synthetic data representing simple resistivity and velocity models. About 70% of the anomalies in both seismic and DC resistivity methods were reconstructed in terms of amplitude and geometry using the local optimization algorithm, while the global optimization algorithm shows improved results as it reconstructed about 80% of the amplitude and geometry of the anomali...
Multi-scale Quantitative Diagenesis and Impacts on Heterogeneity of Carbonate Reservoir Rocks, Nov 19, 2019
Volume 2: Computational Fluid Dynamics, 2019
In this investigation, coupled-geomechanical modeling is performed using the COMSOL Multiphysics ... more In this investigation, coupled-geomechanical modeling is performed using the COMSOL Multiphysics software, during carbon dioxide injection into the deep Khuff carbonate reservoir. Khuff reservoir is a carbonate reservoir that is capped by the low permeability Sudair shale geological layer. The main objective of the study was to evaluate safe values of the carbon dioxide injection parameters for the Khuff reservoir that will act as a benchmark for the similar reservoirs and injection scenarios around the globe. Carbon dioxide was injected for a period of 10 years into the reservoir and the corresponding variations in the reservoir pore-pressure and ground uplift was evaluated. The Mohr-Coulomb failure criterion was utilized to perform the stability analysis for the Khuff reservoir during carbon dioxide injection.
Attenuation of Incoherent Seismic Noise, 2019
Attenuation of Incoherent Seismic Noise, 2019
Advances in Oil and Gas Exploration & Production, 2020
The use of general descriptive names, registered names, trademarks, service marks, etc. in this p... more The use of general descriptive names, registered names, trademarks, service marks, etc. in this publication does not imply, even in the absence of a specific statement, that such names are exempt from the relevant protective laws and regulations and therefore free for general use.
Attenuation of Incoherent Seismic Noise, 2019
Attenuation of Incoherent Seismic Noise, 2019
It is well-known that the classical mean filter is optimal for estimating the mean value of a seq... more It is well-known that the classical mean filter is optimal for estimating the mean value of a sequence of random numbers taken from white Gaussian distributed source.
Minerals, 2021
The present study interprets the subsurface structure of the Rajian area using seismic sections a... more The present study interprets the subsurface structure of the Rajian area using seismic sections and the identification of hydrocarbon-bearing zones using petrophysical analysis. The Rajian area lies within the Upper Indus Basin in the southeast (SE) of the Salt Range Potwar Foreland Basin. The marked horizons are identified using formation tops from two vertical wells. Seismic interpretation of the given 2D seismic data reveals that the study area has undergone severe distortion illustrated by thrusts and back thrusts, forming a triangular zone within the subsurface. The final trend of those structures is northwest–southeast (NW–SE), indicating that the area is part of the compressional regime. The zones interpreted by the study of hydrocarbon potential include Sakessar limestone and Khewra sandstone. Due to the unavailability of a petrophysics log within the desired investigation depths, lithology cross-plots were used for the identification of two potential hydrocarbon-bearing zon...
Sustainability, 2020
The release of large quantities of CO2 into the atmosphere is one of the major causes of global w... more The release of large quantities of CO2 into the atmosphere is one of the major causes of global warming. The most viable method to control the level of CO2 in the atmosphere is to capture and permanently sequestrate the excess amount of CO2 in subsurface geological reservoirs. The injection of CO2 gives rise to pore pressure buildup. It is crucial to monitor the rising pore pressure in order to prevent the potential failure of the reservoir and the subsequent leakage of the stored CO2 into the overburden layers, and then back to the atmosphere. In this paper, the Minjur sandstone reservoir in eastern Saudi Arabia was considered for establishing a coupled geomechanical model and performing the corresponding stability analysis. During the geomechanical modeling process, the fault passing through the Minjur and Marrat layers was also considered. The injection-induced pore-pressure and ground uplift profiles were calculated for the case of absence of a fault across the reservoir, as wel...
GeoArabia, 2012
The coherence attribute is an edge detection method that is widely used for interpreting faults o... more The coherence attribute is an edge detection method that is widely used for interpreting faults on 3-D seismic time slices. The traditional coherence attribute is calculated on migrated volumes using traces from all available azimuths. It has recently been shown that calculating coherence along specific azimuths can enhance the detection of faults running perpendicular to those azimuths. In this study, we applied azimuthal coherence attribute analysis on a 3-D seismic data set from a gas field in Central Saudi Arabia. We generated four migrated 3-D data volumes sorted by azimuth in addition to a conventional full-azimuth volume. We then calculated the coherence attribute for all volumes and compared each azimuthal coherence volume to the conventional full-azimuth coherence volume. The azimuthal coherence results exhibited an improved definition for faults whose strikes are perpendicular to the sorting azimuth. More specifically, systems of NW-trending discontinuities were imaged mor...
Applied Sciences, 2021
Well logging is a significant procedure that assists geophysicists and geologists with making pre... more Well logging is a significant procedure that assists geophysicists and geologists with making predictions regarding boreholes and efficiently utilizing and optimizing the drilling process. The current study area is positioned in the Punjab Territory of Pakistan, and the geographic coordinates are 30020′10 N and 70043′30 E. The objective of the current research work was to interpret the subsurface structure and reservoir characteristics of the Kabirwala area Tola (01) well, which is located in the Punjab platform, Central Indus Basin, utilizing 2D seismic and well log data. Formation evaluation for hydrocarbon potential using the reservoir properties is performed in this study. For the marked zone of interest, the study also focuses on evaluating the average water saturation, average total porosity, average effective porosity, and net pay thickness. The results of the study show a spotted horizon stone with respect to time and depth as follows: Dunghan formation, 0.9 s and 1080.46 m;...
The study of impact craters on Earth has picked up high worldwide consideration, which can be don... more The study of impact craters on Earth has picked up high worldwide consideration, which can be done by studying the ground surface using remote sensing (satellite), geological outcrops, drilling hol...
GEOPHYSICS, 2020
We have addressed the problem of measuring the compressional wave velocity at a very shallow dept... more We have addressed the problem of measuring the compressional wave velocity at a very shallow depth in unconsolidated dune sand. Because the overburden stress is very small at shallow depths, the respective velocity is small and the seismic signal is weak. This is why such data are scarce, in the lab and in the field. Our approach is to stage a high-resolution seismic experiment with a dense geophone line with spacing varying between 10 and 25 cm, allowing us to produce a velocity-depth relation in the upper 1 m interval. These results are combined with another survey in which the geophone spacing is 2 m and the dominant frequency is an order of magnitude lower than in the first survey. The latter results give us the velocity profile in the deeper interval between 1 and 7 m, down to the base of the dune. The velocity rapidly increases from about 48 m/s in the first few centimeters to 231 m/s at 1 m depth and then gradually increases to 425 m/s at 7 m depth. This is the first time whe...
GEO 2008, 2008
Seismic Array Response in the Presence of Laterally Varying Thickness of the Weathering Layer , S... more Seismic Array Response in the Presence of Laterally Varying Thickness of the Weathering Layer , Seismic Array Response in the Presence of Laterally Varying Thickness of the Weathering Layer , کتابخانه دیجیتال دفتر تبلیغات اسلامی
Uploads
Papers by Abdullatif Al-Shuhail