Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Guru Meditation Error and then Reboot when sending datas with NewKaku protocol #87

Open
Jul 9, 2023 · 3 comments
Open

Guru Meditation Error and then Reboot when sending datas with NewKaku protocol #87

Jul 9, 2023 · 3 comments

Comments

Copy link

Hi ! first of all, thanks for all the amazing work you did !
I need some help please.
Receiving data works like a charm but I have issues with emission :
my ESP32 nodeMCU always crash when I try to send data with the NewKaku protocol (I have DIO stuffs)
It seem's that the crash only occurs with NewKaku protocol ; I've tried some example from https://www.rflink.nl/protref.php Sample data of transmitted RF packets with others protocols : no crash.

Here is the serial output log with 5 different data sent.
NewKaku always crash the esp with Guru Mediatation error and then reboot :

12:41:53.615 -> NTP synchronized: 2023-07-09 10:41:52
12:42:39.179 -> [2K Message arrived [Serial]:10;Kaku;01769f0a;2;ON
12:42:39.179 -> 20;01;CMD UNKNOWN;
12:43:20.029 -> [2K Message arrived [Serial]:10;DELTRONIC;001c33;
12:43:20.029 -> 20;02;CMD UNKNOWN;
12:43:37.909 -> [2K Message arrived [Serial]:10;HomeEasy;7900b100;3;ON
12:43:37.943 -> 20;03;CMD UNKNOWN;
12:43:53.175 -> [2K Message arrived [Serial]:10;Kaku;00004d;1;OFF;
12:43:53.578 -> 20;04;OK;
12:44:11.549 -> [2K Message arrived [Serial]:10;NewKaku;128ac4d;1;OFF;
12:44:11.850 -> Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).
12:44:11.850 ->
12:44:11.850 -> Core 1 register dump:
12:44:11.850 -> PC : 0x4008476c PS : 0x00060c35 A0 : 0x800847ae A1 : 0x3ffb2110
12:44:11.850 -> A2 : 0x3ff5f070 A3 : 0x10ddd41a A4 : 0x00000017 A5 : 0x3ffb81e8
12:44:11.850 -> A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x10ddd41a A9 : 0x3ff5f078
12:44:11.884 -> A10 : 0x00000001 A11 : 0x00060c23 A12 : 0x00060c20 A13 : 0x00000001
12:44:11.884 -> A14 : 0x00000019 A15 : 0x00000001 SAR : 0x00000009 EXCCAUSE: 0x00000006
12:44:11.884 -> EXCVADDR: 0x00000000 LBEG : 0x40084781 LEND : 0x40084789 LCOUNT : 0x00000027
12:44:11.884 ->
12:44:11.884 ->
12:44:11.884 -> Backtrace: 0x40084769:0x3ffb2110 0x400847ab:0x3ffb2130 0x400f831c:0x3ffb2150 0x400dbeec:0x3ffb2170 0x400de5f1:0x3ffb21b0 0x400e391a:0x3ffb21e0 0x400e5278:0x3ffb2200 0x400dcae5:0x3ffb2220 0x400e4f46:0x3ffb2240 0x400e5467:0x3ffb2270 0x400f9075:0x3ffb2290
12:44:11.917 ->
12:44:11.917 ->
12:44:11.917 -> Core 0 register dump:
12:44:11.917 -> PC : 0x401949ea PS : 0x00060e35 A0 : 0x801029c4 A1 : 0x3ffbca50
12:44:11.917 -> A2 : 0x00000000 A3 : 0x80000001 A4 : 0x800858f2 A5 : 0x3ffbf68c
12:44:11.950 -> A6 : 0x3ffbe5dc A7 : 0x3ffc92ec A8 : 0x8010249a A9 : 0x3ffbca20
12:44:11.950 -> A10 : 0x00000000 A11 : 0x80000001 A12 : 0x80090ddc A13 : 0x3ffbc950
12:44:11.950 -> A14 : 0x00000003 A15 : 0x00060023 SAR : 0x0000001d EXCCAUSE: 0x00000006
12:44:11.950 -> EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000
12:44:11.950 ->
12:44:11.950 ->
12:44:11.950 -> Backtrace: 0x401949e7:0x3ffbca50 0x401029c1:0x3ffbca70 0x4008eea8:0x3ffbca90
12:44:11.984 ->
12:44:11.984 ->
12:44:11.984 ->
12:44:11.984 ->
12:44:11.984 -> ELF file SHA256: 2e886cce41b4d59b
12:44:11.984 ->
12:44:11.984 -> E (16509) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
12:44:11.984 -> Rebooting...
12:44:11.984 -> ets Jun 8 2016 00:22:57
12:44:11.984 ->
12:44:11.984 -> rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
12:44:11.984 -> configsip: 0, SPIWP:0xee
12:44:11.984 -> clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
12:44:12.018 -> mode:DIO, clock div:2
12:44:12.018 -> load:0x3fff0030,len:1184
12:44:12.018 -> load:0x40078000,len:13192
12:44:12.018 -> load:0x40080400,len:3028
12:44:12.018 -> entry 0x400805e4
12:44:12.520 -> E (522) esp_core_dump_flash: No core d⸮f⸮⸮ partition found!
12:44:12.520 -> E (522) esp_core_dump_flash: No core dump partition found!
12:44:12.788 ->
12:44:12.788 -> Arduino IDE Version : 10812
12:44:12.788 -> ESP SDK version: v4.4.4
12:44:12.788 -> Sketch File : RFLink/RFLink.cpp
12:44:12.788 -> Compiled on : Jul 1 2023 at 14:05:45
12:44:12.788 -> 20;00;RFLink_ESP;VER=5.1;BUILD=unknown;
12:44:12.788 -> Loading persistent filesystem... OK. File system usage: 12/320KB.
12:44:12.821 -> Now opening JSON config file '/config.json'
12:44:12.855 -> JSON file mem usage: 1875 / 4096
12:44:12.855 -> Now dumping JSON file content:
@cpainchaud
Copy link
Owner

Hi,

Did you compile it by yourself? or used an image from this repo (or another?)

thank you

Copy link
Author

Jul 10, 2023 •
edited
Loading

Hi !
I 've used RFLink32-master.zip from here and compiled with Plateformio IDE as recommanded in documentation.
It was the first time I used Plateformio... so it is more than possible that I've missed someting..?.. In that case sorry for inconvenience. I will try to use last nightly bin image and give feedback.
Thanks for all
Greetings

Copy link
Author

Jul 10, 2023 •
edited
Loading

Dear C. Painchaud,
I 've updated from web interface firmware via http url : https://github.com/cpainchaud/RFLink32/releases/download/nightly/esp32-firmware-OTA.bin

But still error Guru Meditation error when emmitting (serial or mqtt)

I have 2 standard Rf module Qiachip WL 101 102
Receiving no problem , Mqtt works fine too

Arduino IDE Version : 10812
ESP SDK version: v4.4.4
Sketch File : RFLink/RFLink.cpp
Compiled on : Jul 10 2023 at 08:09:39
20;00;RFLink_ESP;VER=5.1;BUILD=20230710-080645-master;
Loading persistent filesystem... OK. File system usage: 12/320KB.
Now opening JSON config file '/config.json'
JSON file mem usage: 1875 / 4096
Now dumping JSON file content:
{"wifi":{"client_enabled":true,"client_dhcp_enabled":true,"client_ssid":"XXXXXXXXXXXXXXX","client_password":"XXXXXXXXXXXXXXX","client_ip":"XXXXXXXXXXXXXXX","client_mask":"255.255.255.0","client_gateway":"XXXXXXXXXXXXXXX","client_dns":"XXXXXXXXXXXXXXX","client_hostname":"XXXXXXXXXXXXXXX","ap_enabled":true,"ap_ssid":"RFLink-AP","ap_password":"","ap_ip":"192.168.4.1","ap_network":"192.168.4.0","ap_mask":"255.255.255.0"},"mqtt":{"enabled":true,"server":"XXXXXXXXXXXXXXX","port":1883,"id":"RFLink32","user":"XXXXXXXXXXXXXXX","password":"XXXXXXXXXXXXXXX","topic_in":"/ESP00/cmd","topic_out":"/ESP00/msg","lwt_enabled":true,"topic_lwt":"/ESP00/lwt","ssl_enabled":false,"ssl_insecure":true,"ca_cert":""},"serial2net":{"enabled":false,"port":1900},"portal":{"enabled":true,"auth_enabled":true,"auth_user":"XXXXXXXXXXXXXXX","auth_password":"XXXXXXXXXXXXXXX"},"signal":{"async_mode_enabled":false,"sample_rate":1,"min_raw_pulses":24,"seek_timeout":25,"min_preamble":100,"min_pulse_len":90,"signal_end_timeout":5000,"signal_repeat_time":250,"scan_high_time":50},"radio":{"hardware":"generic","rx_data":21,"rx_vcc":-1,"rx_nmos":-1,"rx_pmos":-1,"rx_gnd":-1,"rx_na":-1,"rx_reset":-1,"rx_cs":-1,"tx_data":23,"tx_vcc":-1,"tx_nmos":-1,"tx_pmos":-1,"tx_gnd":-1}}
Now trying to initialize hardware 'generic'
Hardware initialization was successful!
Applied slicer 'Legacy'
Signal parameters have changed.

  • WIFI AP starting with SSID 'RFLink-AP' and band=9... OK
    Trying to connect WIFI SSID XXXXXXXXXXXXXXX. A status will be given whenever it occurs.
    Radio pin RF_RX_DATA : 21
    Radio pin RF_TX_DATA : 23
    Starting WebServer... OK
    Connected to AP SSID:XXXXXXXXXXXXXXX BSSID: XXXXXXXXXXXXXXX Channel: 11 Auth mode: 3
    WiFi Client has received a new IP: XXXXXXXXXXXXXXX
    MQTT parameters have changed, first disconnecting...
    MQTT parameters have changed, now applying...
    Trying to connect to MQTT Server 'XXXXXXXXXXXXXXX' ... Established
    MQTT ID : RFLink32
    MQTT Username : XXXXXXXXXXXXXXX

NTP synchronized: 2023-07-10 09:12:29

20;01;NewKaku;ID=XXXXXXXXXXXXXXX;SWITCH=1;CMD=ON;
20;02;NewKaku;ID=XXXXXXXXXXXXXXX;SWITCH=2;CMD=OFF;
20;03;NewKaku;ID=XXXXXXXXXXXXXXX;SWITCH=2;CMD=ON;

Message arrived [MQTT] 10;NewKaku;XXXXXXXXXXXXXXX;2;ON;
Guru Meditation Error: Core 1 panic'ed (Interrupt wdt timeout on CPU1).

Core 1 register dump:
PC : 0x400f83f0 PS : 0x00060f35 A0 : 0x800dbf3f A1 : 0x3ffb2070
A2 : 0x00000000 A3 : 0x04719bf3 A4 : 0x3ffd397c A5 : 0x3ffb81e8
A6 : 0x00ff0000 A7 : 0xff000000 A8 : 0x800f83cf A9 : 0x3ffb2050
A10 : 0x047198f1 A11 : 0x00000000 A12 : 0x047196df A13 : 0x00000001
A14 : 0x3ffc712c A15 : 0x3ffc7144 SAR : 0x00000009 EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x40084781 LEND : 0x40084789 LCOUNT : 0x00000026

Backtrace: 0x400f83ed:0x3ffb2070 0x400dbf3c:0x3ffb2090 0x400de641:0x3ffb20d0 0x400e396a:0x3ffb2100 0x400e52cc:0x3ffb2120 0x400dc9ea:0x3ffb2140 0x400e3d37:0x3ffb2160 0x40192ee7:0x3ffb2180 0x400e5c71:0x3ffb21a0 0x400e468a:0x3ffb21e0 0x400e4f8b:0x3ffb2240 0x400e54bb:0x3ffb2270 0x400f9125:0x3ffb2290

#0 0x400f83ed:0x3ffb2070 in initArduino at C:/Users/XXXXXXXXXXXXXXX/.platformio/packages/framework-arduinoespressif32/cores/esp32/esp32-hal-misc.c:220
#1 0x400dbf3c:0x3ffb2090 in RFLink::Signal::AC_Send(unsigned long, unsigned char) at RFLink/2_Signal.cpp:910
#2 0x400de641:0x3ffb20d0 in Plugin_016(unsigned char, char const*) at RFLink/./Plugins/Plugin_016.c:37
#3 0x400e396a:0x3ffb2100 in saveRTSRecord(unsigned char, unsigned int, unsigned short) at RFLink/./Plugins/Plugin_017.c:554
#4 0x400e52cc:0x3ffb2120 in ArduinoJson6185_91::VariantSlot::next() at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Variant/VariantSlot.hpp:42
(inlined by) ArduinoJson6185_91::VariantSlot* ArduinoJson6185_91::CollectionData::getSlot<ArduinoJson6185_91::StringAdapter<char const*, false, void> >(ArduinoJson6185_91::StringAdapter<char const*, false, void>) const at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Collection/CollectionImpl.hpp:112
(inlined by) ArduinoJson6185_91::VariantData* ArduinoJson6185_91::CollectionData::getOrAddMember<ArduinoJson6185_91::StringAdapter<char const*, false, void> >(ArduinoJson6185_91::StringAdapter<char const*, false, void>, ArduinoJson6185_91::MemoryPool*) at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Collection/CollectionImpl.hpp:148
(inlined by) ArduinoJson6185_91::VariantData* ArduinoJson6185_91::objectGetOrAddMember<ArduinoJson6185_91::StringAdapter<char const*, false, void>

(ArduinoJson6185_91::CollectionData*, ArduinoJson6185_91::StringAdapter<char const*, false, void>, ArduinoJson6185_91::MemoryPool*) at .pio/libdeps/genericESP32/ArduinoJson/src/ArduinoJson/Object/ObjectFunctions.hpp:49
#5 0x400dc9ea:0x3ffb2140 in HardwareSerialExtended::readBytesUntilNewLine(char*, unsigned int) at RFLink/3_Serial.cpp:37
(inlined by) ReadSerial() at RFLink/3_Serial.cpp:114
#6 0x400e3d37:0x3ffb2160 in RFLink::Mqtt::reconnect(int, bool) at RFLink/6_MQTT.cpp:263
#7 0x40192ee7:0x3ffb2180 in RFLink::Utils::BitArray::BitArray() at RFLink/7_Utils.cpp:511
#8 0x400e5c71:0x3ffb21a0 in PubSubClient::setBufferSize(unsigned short) at .pio/libdeps/genericESP32/PubSubClient/src/PubSubClient.cpp:743
#9 0x400e468a:0x3ffb21e0 in _GLOBAL__sub_D_WIFIClient at RFLink/6_MQTT.cpp:75
(inlined by) _GLOBAL__sub_D_WIFIClient at RFLink/6_MQTT.cpp:476
#10 0x400e4f8b:0x3ffb2240 in RFLink::sendRawPrint(char const*, bool) at RFLink/RFLink.cpp:211
#11 0x400e54bb:0x3ffb2270 in std::function<void (char*, unsigned char*, unsigned int)>::~function() at c:\users\XXXXXXXXXXXXXXX.platformio\packages\toolchain-xtensa-esp32\xtensa-esp32-elf\include\c++\8.4.0\bits/std_function.h:370
(inlined by) PubSubClient::~PubSubClient() at .pio/libdeps/genericESP32/PubSubClient/src/PubSubClient.cpp:161
#12 0x400f9125:0x3ffb2290 in cpu_ll_get_cycle_count at C:/Users/XXXXXXXXXXXXXXX/.platformio/packages/framework-arduinoespressif32/tools/sdk/esp32/include/hal/esp32/include/hal/cpu_ll.h:45
(inlined by) pulseIn at C:/Users/XXXXXXXXXXXXXXX/.platformio/packages/framework-arduinoespressif32/cores/esp32/wiring_pulse.c:41

Core 0 register dump:
PC : 0x40194bfe PS : 0x00060335 A0 : 0x80102a74 A1 : 0x3ffbca50
A2 : 0x00000000 A3 : 0x80000001 A4 : 0x80090ddc A5 : 0x3ffbc970
A6 : 0x00000003 A7 : 0x00060023 A8 : 0x8010254a A9 : 0x3ffbca20
A10 : 0x00000000 A11 : 0x003fffff A12 : 0x80083fc7 A13 : 0x3ffbc940
A14 : 0x00000001 A15 : 0x3ffbc720 SAR : 0x0000001d EXCCAUSE: 0x00000006
EXCVADDR: 0x00000000 LBEG : 0x00000000 LEND : 0x00000000 LCOUNT : 0x00000000

Backtrace: 0x40194bfb:0x3ffbca50 0x40102a71:0x3ffbca70 0x4008eea8:0x3ffbca90

#0 0x40194bfb:0x3ffbca50 in mbedtls_ssl_update_out_pointers at ??:?
#1 0x40102a71:0x3ffbca70 in esp_register_freertos_tick_hook_for_cpu at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/esp_system/freertos_hooks.c:101
(inlined by) esp_register_freertos_tick_hook_for_cpu at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/esp_system/freertos_hooks.c:88
#2 0x4008eea8:0x3ffbca90 in prvIdleTask at /Users/ficeto/Desktop/ESP32/ESP32S2/esp-idf-public/components/freertos/tasks.c:3987

ELF file SHA256: ce9095aa4c778add

E (3267) esp_core_dump_flash: Core dump flash config is corrupted! CRC=0x7bd5c66f instead of 0x0
Rebooting...
ets Jun 8 2016 00:22:57

rst:0xc (SW_CPU_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0030,len:1184
load:0x40078000,len:13192
load:0x40080400,len:3028
entry 0x400805e4
E (522) esp_core_dump_flash: No core du���partition found!
E (522) esp_core_dump_flash: No core dump partition found!

Arduino IDE Version : 10812
ESP SDK version: v4.4.4
Sketch File : RFLink/RFLink.cpp
Compiled on : Jul 10 2023 at 08:09:39
20;00;RFLink_ESP;VER=5.1;BUILD=20230710-080645-master;
Loading persistent filesystem... OK. File system usage: 12/320KB.
[...]

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
2 participants
@cpainchaud