Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta
• Remix IDE

More Options

• Similar
• Sol2Uml
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {IERC20} from "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";
import {IERC20Permit} from "openzeppelin-contracts/contracts/token/ERC20/extensions/IERC20Permit.sol";
import {SafeERC20} from "openzeppelin-contracts/contracts/token/ERC20/utils/SafeERC20.sol";
import {Ownable2StepUpgradeable} from "openzeppelin-contracts-upgradeable/contracts/access/Ownable2StepUpgradeable.sol";
import {IPolygonMigration} from "./interfaces/IPolygonMigration.sol";

/// @title Polygon Migration
/// @author Polygon Labs (@DhairyaSethi, @gretzke, @qedk)
/// @notice This is the migration contract for Matic <-> Polygon ERC20 token on Ethereum L1
/// @dev The contract allows for a 1-to-1 conversion from $MATIC into $POL and vice-versa
/// @custom:security-contact [email protected]
contract PolygonMigration is Ownable2StepUpgradeable, IPolygonMigration {
    using SafeERC20 for IERC20;
    using SafeERC20 for IERC20Permit;

    IERC20 public immutable matic;
    IERC20 public polygon;
    bool public unmigrationLocked;

    modifier onlyUnmigrationUnlocked() {
        if (unmigrationLocked) revert UnmigrationLocked();
        _;
    }

    constructor(address matic_) {
        if (matic_ == address(0)) revert InvalidAddress();
        matic = IERC20(matic_);
        // so that the implementation contract cannot be initialized
        _disableInitializers();
    }

    function initialize() external initializer {
        __Ownable_init();
    }

    /// @notice This function allows owner/governance to set POL token address *only once*
    /// @param polygon_ Address of deployed POL token
    function setPolygonToken(address polygon_) external onlyOwner {
        if (polygon_ == address(0) || address(polygon) != address(0)) revert InvalidAddressOrAlreadySet();
        polygon = IERC20(polygon_);
    }

    /// @inheritdoc IPolygonMigration
    function migrate(uint256 amount) external {
        emit Migrated(msg.sender, msg.sender, amount);

        matic.safeTransferFrom(msg.sender, address(this), amount);
        polygon.safeTransfer(msg.sender, amount);
    }

    /// @inheritdoc IPolygonMigration
    function migrateTo(address recipient, uint256 amount) external {
        emit Migrated(msg.sender, recipient, amount);

        matic.safeTransferFrom(msg.sender, address(this), amount);
        polygon.safeTransfer(recipient, amount);
    }

    /// @inheritdoc IPolygonMigration
    function unmigrate(uint256 amount) external onlyUnmigrationUnlocked {
        emit Unmigrated(msg.sender, msg.sender, amount);

        polygon.safeTransferFrom(msg.sender, address(this), amount);
        matic.safeTransfer(msg.sender, amount);
    }

    /// @inheritdoc IPolygonMigration
    function unmigrateTo(address recipient, uint256 amount) external onlyUnmigrationUnlocked {
        emit Unmigrated(msg.sender, recipient, amount);

        polygon.safeTransferFrom(msg.sender, address(this), amount);
        matic.safeTransfer(recipient, amount);
    }

    /// @inheritdoc IPolygonMigration
    function unmigrateWithPermit(
        uint256 amount,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external onlyUnmigrationUnlocked {
        emit Unmigrated(msg.sender, msg.sender, amount);

        IERC20Permit(address(polygon)).safePermit(msg.sender, address(this), amount, deadline, v, r, s);
        polygon.safeTransferFrom(msg.sender, address(this), amount);
        matic.safeTransfer(msg.sender, amount);
    }

    /// @inheritdoc IPolygonMigration
    function updateUnmigrationLock(bool unmigrationLocked_) external onlyOwner {
        emit UnmigrationLockUpdated(unmigrationLocked_);
        unmigrationLocked = unmigrationLocked_;
    }

    /// @inheritdoc IPolygonMigration
    function version() external pure returns (string memory) {
        return "1.2.0";
    }

    /// @inheritdoc IPolygonMigration
    function burn(uint256 amount) external onlyOwner {
        polygon.safeTransfer(0x000000000000000000000000000000000000dEaD, amount);
    }

    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Compatible with tokens that require the approval to be set to
     * 0 before setting it to a non-zero value.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable2Step.sol)

pragma solidity ^0.8.0;

import "./OwnableUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership} and {acceptOwnership}.
 *
 * This module is used through inheritance. It will make available all functions
 * from parent (Ownable).
 */
abstract contract Ownable2StepUpgradeable is Initializable, OwnableUpgradeable {
    function __Ownable2Step_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable2Step_init_unchained() internal onlyInitializing {
    }
    address private _pendingOwner;

    event OwnershipTransferStarted(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Returns the address of the pending owner.
     */
    function pendingOwner() public view virtual returns (address) {
        return _pendingOwner;
    }

    /**
     * @dev Starts the ownership transfer of the contract to a new account. Replaces the pending transfer if there is one.
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual override onlyOwner {
        _pendingOwner = newOwner;
        emit OwnershipTransferStarted(owner(), newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`) and deletes any pending owner.
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual override {
        delete _pendingOwner;
        super._transferOwnership(newOwner);
    }

    /**
     * @dev The new owner accepts the ownership transfer.
     */
    function acceptOwnership() public virtual {
        address sender = _msgSender();
        require(pendingOwner() == sender, "Ownable2Step: caller is not the new owner");
        _transferOwnership(sender);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.21;

import {IERC20} from "openzeppelin-contracts/contracts/token/ERC20/IERC20.sol";

/// @title Polygon Migration
/// @author Polygon Labs (@DhairyaSethi, @gretzke, @qedk)
/// @notice This is the migration contract for Matic <-> Polygon ERC20 token on Ethereum L1
/// @dev The contract allows for a 1-to-1 conversion from $MATIC into $POL and vice-versa
/// @custom:security-contact [email protected]
interface IPolygonMigration {
    /// @notice emitted when MATIC are migrated to POL
    /// @param account the account that migrated MATIC
    /// @param recipient the account that received POL
    /// @param amount the amount of MATIC that was migrated
    event Migrated(address indexed account, address recipient, uint256 amount);

    /// @notice emitted when POL are unmigrated to MATIC
    /// @param account the account that unmigrated POL
    /// @param recipient the account that received MATIC
    /// @param amount the amount of POL that was unmigrated
    event Unmigrated(address indexed account, address indexed recipient, uint256 amount);

    /// @notice emitted when the unmigration is enabled/disabled
    /// @param lock whether the unmigration is enabled or not
    event UnmigrationLockUpdated(bool lock);

    /// @notice thrown when a user attempts to unmigrate while unmigration is locked
    error UnmigrationLocked();

    /// @notice thrown when an invalid POL token address is supplied or the address is already set
    error InvalidAddressOrAlreadySet();

    /// @notice thrown when a zero address is supplied during deployment
    error InvalidAddress();

    /// @notice this function allows for migrating MATIC tokens to POL tokens
    /// @param amount amount of MATIC to migrate
    /// @dev the function does not do any validation since the migration is a one-way process
    function migrate(uint256 amount) external;

    /// @notice this function allows for migrating MATIC tokens to POL tokens to an account
    /// @param recipient address to receive POL tokens
    /// @param amount amount of MATIC to migrate
    /// @dev the function does not do any validation since the migration is a one-way process
    function migrateTo(address recipient, uint256 amount) external;

    /// @notice this function allows for unmigrating from POL tokens to MATIC tokens
    /// @param amount amount of POL to migrate
    /// @dev the function can only be called when unmigration is unlocked (lock updatable by governance)
    /// @dev the function does not do any further validation, also note the unmigration is a reversible process
    function unmigrate(uint256 amount) external;

    /// @notice this function allows for unmigrating POL tokens (from msg.sender) to MATIC tokens (to account)
    /// @param recipient address to receive MATIC tokens
    /// @param amount amount of POL to migrate
    /// @dev the function can only be called when unmigration is unlocked (lock updatable by governance)
    /// @dev the function does not do any further validation, also note the unmigration is a reversible process
    function unmigrateTo(address recipient, uint256 amount) external;

    /// @notice this function allows for unmigrating from POL tokens to MATIC tokens using an EIP-2612 permit
    /// @param amount amount of POL to migrate
    /// @param deadline deadline for the permit
    /// @param v v value of the permit signature
    /// @param r r value of the permit signature
    /// @param s s value of the permit signature
    /// @dev the function can only be called when unmigration is unlocked (lock updatable by governance)
    /// @dev the function does not do any further validation, also note the unmigration is a reversible process
    function unmigrateWithPermit(uint256 amount, uint256 deadline, uint8 v, bytes32 r, bytes32 s) external;

    /// @notice allows governance to lock or unlock the unmigration process
    /// @param unmigrationLocked new unmigration lock status
    /// @dev the function does not do any validation since governance can update the unmigration process if required
    function updateUnmigrationLock(bool unmigrationLocked) external;

    /// @notice allows governance to burn `amount` of POL tokens
    /// @param amount amount of POL to burn
    /// @dev this functions burns POL by sending to dead address
    /// @dev does not change totalSupply in the internal accounting of POL
    function burn(uint256 amount) external;

    /// @return maticToken the MATIC token address
    function matic() external view returns (IERC20 maticToken);

    /// @return polygonEcosystemToken the POL token address
    function polygon() external view returns (IERC20 polygonEcosystemToken);

    /// @return isUnmigrationLocked whether the unmigration is locked or not
    function unmigrationLocked() external view returns (bool isUnmigrationLocked);

    /// @notice returns the version of the contract
    /// @return version version string
    function version() external pure returns (string memory version);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (access/Ownable.sol)

pragma solidity ^0.8.0;

import "../utils/ContextUpgradeable.sol";
import "../proxy/utils/Initializable.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
abstract contract OwnableUpgradeable is Initializable, ContextUpgradeable {
    address private _owner;

    event OwnershipTransferred(address indexed previousOwner, address indexed newOwner);

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    function __Ownable_init() internal onlyInitializing {
        __Ownable_init_unchained();
    }

    function __Ownable_init_unchained() internal onlyInitializing {
        _transferOwnership(_msgSender());
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        _checkOwner();
        _;
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view virtual returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if the sender is not the owner.
     */
    function _checkOwner() internal view virtual {
        require(owner() == _msgSender(), "Ownable: caller is not the owner");
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby disabling any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        _transferOwnership(address(0));
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(newOwner != address(0), "Ownable: new owner is the zero address");
        _transferOwnership(newOwner);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Internal function without access restriction.
     */
    function _transferOwnership(address newOwner) internal virtual {
        address oldOwner = _owner;
        _owner = newOwner;
        emit OwnershipTransferred(oldOwner, newOwner);
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[49] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (proxy/utils/Initializable.sol)

pragma solidity ^0.8.2;

import "../../utils/AddressUpgradeable.sol";

/**
 * @dev This is a base contract to aid in writing upgradeable contracts, or any kind of contract that will be deployed
 * behind a proxy. Since proxied contracts do not make use of a constructor, it's common to move constructor logic to an
 * external initializer function, usually called `initialize`. It then becomes necessary to protect this initializer
 * function so it can only be called once. The {initializer} modifier provided by this contract will have this effect.
 *
 * The initialization functions use a version number. Once a version number is used, it is consumed and cannot be
 * reused. This mechanism prevents re-execution of each "step" but allows the creation of new initialization steps in
 * case an upgrade adds a module that needs to be initialized.
 *
 * For example:
 *
 * [.hljs-theme-light.nopadding]
 * ```solidity
 * contract MyToken is ERC20Upgradeable {
 *     function initialize() initializer public {
 *         __ERC20_init("MyToken", "MTK");
 *     }
 * }
 *
 * contract MyTokenV2 is MyToken, ERC20PermitUpgradeable {
 *     function initializeV2() reinitializer(2) public {
 *         __ERC20Permit_init("MyToken");
 *     }
 * }
 * ```
 *
 * TIP: To avoid leaving the proxy in an uninitialized state, the initializer function should be called as early as
 * possible by providing the encoded function call as the `_data` argument to {ERC1967Proxy-constructor}.
 *
 * CAUTION: When used with inheritance, manual care must be taken to not invoke a parent initializer twice, or to ensure
 * that all initializers are idempotent. This is not verified automatically as constructors are by Solidity.
 *
 * [CAUTION]
 * ====
 * Avoid leaving a contract uninitialized.
 *
 * An uninitialized contract can be taken over by an attacker. This applies to both a proxy and its implementation
 * contract, which may impact the proxy. To prevent the implementation contract from being used, you should invoke
 * the {_disableInitializers} function in the constructor to automatically lock it when it is deployed:
 *
 * [.hljs-theme-light.nopadding]
 * ```
 * /// @custom:oz-upgrades-unsafe-allow constructor
 * constructor() {
 *     _disableInitializers();
 * }
 * ```
 * ====
 */
abstract contract Initializable {
    /**
     * @dev Indicates that the contract has been initialized.
     * @custom:oz-retyped-from bool
     */
    uint8 private _initialized;

    /**
     * @dev Indicates that the contract is in the process of being initialized.
     */
    bool private _initializing;

    /**
     * @dev Triggered when the contract has been initialized or reinitialized.
     */
    event Initialized(uint8 version);

    /**
     * @dev A modifier that defines a protected initializer function that can be invoked at most once. In its scope,
     * `onlyInitializing` functions can be used to initialize parent contracts.
     *
     * Similar to `reinitializer(1)`, except that functions marked with `initializer` can be nested in the context of a
     * constructor.
     *
     * Emits an {Initialized} event.
     */
    modifier initializer() {
        bool isTopLevelCall = !_initializing;
        require(
            (isTopLevelCall && _initialized < 1) || (!AddressUpgradeable.isContract(address(this)) && _initialized == 1),
            "Initializable: contract is already initialized"
        );
        _initialized = 1;
        if (isTopLevelCall) {
            _initializing = true;
        }
        _;
        if (isTopLevelCall) {
            _initializing = false;
            emit Initialized(1);
        }
    }

    /**
     * @dev A modifier that defines a protected reinitializer function that can be invoked at most once, and only if the
     * contract hasn't been initialized to a greater version before. In its scope, `onlyInitializing` functions can be
     * used to initialize parent contracts.
     *
     * A reinitializer may be used after the original initialization step. This is essential to configure modules that
     * are added through upgrades and that require initialization.
     *
     * When `version` is 1, this modifier is similar to `initializer`, except that functions marked with `reinitializer`
     * cannot be nested. If one is invoked in the context of another, execution will revert.
     *
     * Note that versions can jump in increments greater than 1; this implies that if multiple reinitializers coexist in
     * a contract, executing them in the right order is up to the developer or operator.
     *
     * WARNING: setting the version to 255 will prevent any future reinitialization.
     *
     * Emits an {Initialized} event.
     */
    modifier reinitializer(uint8 version) {
        require(!_initializing && _initialized < version, "Initializable: contract is already initialized");
        _initialized = version;
        _initializing = true;
        _;
        _initializing = false;
        emit Initialized(version);
    }

    /**
     * @dev Modifier to protect an initialization function so that it can only be invoked by functions with the
     * {initializer} and {reinitializer} modifiers, directly or indirectly.
     */
    modifier onlyInitializing() {
        require(_initializing, "Initializable: contract is not initializing");
        _;
    }

    /**
     * @dev Locks the contract, preventing any future reinitialization. This cannot be part of an initializer call.
     * Calling this in the constructor of a contract will prevent that contract from being initialized or reinitialized
     * to any version. It is recommended to use this to lock implementation contracts that are designed to be called
     * through proxies.
     *
     * Emits an {Initialized} event the first time it is successfully executed.
     */
    function _disableInitializers() internal virtual {
        require(!_initializing, "Initializable: contract is initializing");
        if (_initialized != type(uint8).max) {
            _initialized = type(uint8).max;
            emit Initialized(type(uint8).max);
        }
    }

    /**
     * @dev Returns the highest version that has been initialized. See {reinitializer}.
     */
    function _getInitializedVersion() internal view returns (uint8) {
        return _initialized;
    }

    /**
     * @dev Returns `true` if the contract is currently initializing. See {onlyInitializing}.
     */
    function _isInitializing() internal view returns (bool) {
        return _initializing;
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts v4.4.1 (utils/Context.sol)

pragma solidity ^0.8.0;
import "../proxy/utils/Initializable.sol";

/**
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract ContextUpgradeable is Initializable {
    function __Context_init() internal onlyInitializing {
    }

    function __Context_init_unchained() internal onlyInitializing {
    }
    function _msgSender() internal view virtual returns (address) {
        return msg.sender;
    }

    function _msgData() internal view virtual returns (bytes calldata) {
        return msg.data;
    }

    /**
     * @dev This empty reserved space is put in place to allow future versions to add new
     * variables without shifting down storage in the inheritance chain.
     * See https://docs.openzeppelin.com/contracts/4.x/upgradeable#storage_gaps
     */
    uint256[50] private __gap;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library AddressUpgradeable {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

{
  "remappings": [
    "ds-test/=lib/openzeppelin-contracts-upgradeable/lib/forge-std/lib/ds-test/src/",
    "erc4626-tests/=lib/openzeppelin-contracts-upgradeable/lib/erc4626-tests/",
    "forge-std/=lib/forge-std/src/",
    "openzeppelin-contracts-upgradeable/=lib/openzeppelin-contracts-upgradeable/",
    "openzeppelin-contracts/=lib/openzeppelin-contracts/",
    "openzeppelin/=lib/openzeppelin-contracts-upgradeable/contracts/"
  ],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "metadata": {
    "useLiteralContent": false,
    "bytecodeHash": "ipfs",
    "appendCBOR": true
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  },
  "evmVersion": "paris",
  "viaIR": true,
  "libraries": {}
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"matic_","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[],"name":"InvalidAddress","type":"error"},{"inputs":[],"name":"InvalidAddressOrAlreadySet","type":"error"},{"inputs":[],"name":"UnmigrationLocked","type":"error"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint8","name":"version","type":"uint8"}],"name":"Initialized","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":false,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Migrated","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferStarted","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"account","type":"address"},{"indexed":true,"internalType":"address","name":"recipient","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Unmigrated","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"bool","name":"lock","type":"bool"}],"name":"UnmigrationLockUpdated","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"burn","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"initialize","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"matic","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"migrate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"migrateTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"pendingOwner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"polygon","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"polygon_","type":"address"}],"name":"setPolygonToken","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"unmigrate","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"recipient","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"}],"name":"unmigrateTo","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"name":"unmigrateWithPermit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"unmigrationLocked","outputs":[{"internalType":"bool","name":"","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"bool","name":"unmigrationLocked_","type":"bool"}],"name":"updateUnmigrationLock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"version","outputs":[{"internalType":"string","name":"","type":"string"}],"stateMutability":"pure","type":"function"}]

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

0000000000000000000000007d1afa7b718fb893db30a3abc0cfc608aacfebb0

-----Decoded View---------------
Arg [0] : matic_ (address): 0x7D1AfA7B718fb893dB30A3aBc0Cfc608AaCfeBB0

-----Encoded View---------------
1 Constructor Arguments found :
Arg [0] : 0000000000000000000000007d1afa7b718fb893db30a3abc0cfc608aacfebb0