Template:Convert
This template is used on approximately 1,220,000 pages, or roughly 2% of all pages. To avoid major disruption and server load, any changes should be tested in the template's /sandbox or /testcases subpages, or in your own user subpage. The tested changes can be added to this page in a single edit. Consider discussing changes on the talk page before implementing them. |
This template can only be edited by administrators because it is transcluded onto one or more cascade-protected pages. |
See this information on copying this template and modifying it for use on another wiki. |
This template uses Lua: |
Template {{convert}} calculates a measurement value (number × unit) into the same measurement by a different unit, and then presents the results, formatted. See also the unit symbols recognized by this template.
For example:
{{convert|2|km|mi}}
→ 2 kilometres (1.2 mi) (km entered, converted into miles){{convert|7|mi|km}}
→ 7 miles (11 km) (mi entered, converted into km)
Numbers can be rounded, units can be abbreviated into symbols:
{{convert|2|km|mi|2|abbr=on}}
→ 2 km (1.24 mi){{convert|7|mi|km|2|abbr=on}}
→ 7 mi (11.27 km)
Value ranges can be entered using |to|...
or |-|...
:
{{convert|2|to|5|km|mi}}
→ 2 to 5 kilometres (1.2 to 3.1 mi){{convert|2|-|5|km|mi}}
→ 2–5 kilometres (1.2–3.1 mi)
Combined effect example:
{{convert|2|-|5|km|mi|2|abbr=on}}
→ 2–5 km (1.24–3.11 mi){{convert|2|and|5|km|mi|sigfig=3|abbr=off}}
→ 2 and 5 kilometres (1.24 and 3.11 miles)
Units to convert
Enter units to convert from into:
{{convert|1|lb|kg}}
→ 1 pound (0.45 kg)
- SI units generally accept prefixes, like "m" for milli (10−3), and "M" for mega (106)
- For "per" units, use "/" (slash): kg/ha (see § 'per' units: kg/ha and § Currency per unit: $/km)
- For three-unit units, etc., see Category:Convert-like templates
Unit name or symbol (abbreviation): 1 pound or 1 lb?
By default, the first quantity shows the unit name, the second shows the symbol (or abbreviation):
{{convert|1|lb|kg}}
→ 1 pound (0.45 kg)
Using |abbr=in
shows the symbol for first (left-hand side) unit, and the name instead of the symbol for the second unit:
{{convert|1|lb|kg|abbr=in}}
→ 1 lb (0.45 kilograms)
To abbreviate both or neither:
{{convert|1|lb|kg|abbr=on}}
→ 1 lb (0.45 kg){{convert|1|lb|kg|abbr=off}}
→ 1 pound (0.45 kilograms)
Convenience: {{cvt}} has |abbr=on
by default
Template {{cvt}} is the same as {{convert}}, except that it has |abbr=on
as the default behavior. In {{cvt}}, all other options are available. So:
{{cvt|1|lb|kg}}
→ 1 lb (0.45 kg)
is equivalent to:
{{convert|1|lb|kg|abbr=on}}
→ 1 lb (0.45 kg)
Adjective: a 10-mile distance
Use |adj=on
to produce the adjectival (hyphenated) form:
A {{convert|10|mi|km|adj=on}} distance
→ A 10-mile (16 km) distance.
Default behavior, for comparison:
{{convert|10|mi|km}} to go
→ 10 miles (16 km) to go.
|adj=on
does not produce hyphens with unit symbols, as per Manual of Style:
A {{convert|9|in|cm|adj=on|abbr=on}} nail
→ A 9 in (23 cm) nail.
Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?
By definition, 100 ft equals 30.48 m. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.
Default rounding
By {{Convert}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).
Examples of rounding | ||
---|---|---|
Input | Displays as | Note |
{{convert|123|ft|m|-1}} |
123 feet (40 m) | |
{{convert|123|ft|m}} |
123 feet (37 m) | same output as with 0 (below) |
{{convert|123|ft|m|0}} |
123 feet (37 m) | |
{{convert|123|ft|m|1}} |
123 feet (37.5 m) | |
{{convert|123|ft|m|2}} |
123 feet (37.49 m) | 123 feet is exactly 37.4904 m which is rounded to 37 m if this parameter is not specified at all |
{{convert|500|ft|m|-1}} |
500 feet (150 m) | |
{{convert|500|ft|m}} |
500 feet (150 m) | same output as with -1 (above), because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
|
{{convert|500|ft|m|0}} |
500 feet (152 m) | |
{{convert|500|ft|m|1}} |
500 feet (152.4 m) | |
{{convert|500|ft|m|2}} |
500 feet (152.40 m) | exact value is 152.4 m |
{{convert|500|ft|cm|-3}} |
500 feet (15,000 cm) | |
{{convert|500|ft|cm}} |
500 feet (15,000 cm) | same output as with -3 (above), because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
|
{{convert|500|ft|cm|0}} |
500 feet (15,240 cm) |
Convert supports four types of rounding:
Round to a given precision: use a precision number
Specify the desired precision with an integer as the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of 1⁄10 to the power of this integer. For instance, if the result is 8621 and the rounding parameter is "−2", 8600 will be displayed. If the result is "123.456" and the parameter is "0", 123 will be displayed. Essentially a positive or zero rounding parameter specifies the number of decimal places; a negative value specifies the number of trailing zeroes.
Round to a given number of significant figures: |sigfig=
To specify the output number to be with n significant figures use |sigfig=<number>
:
{{convert|1200|ft|m|sigfig=4}}
→ 1,200 feet (365.8 m){{convert|1200|ft|m|sigfig=3}}
→ 1,200 feet (366 m){{convert|1200|ft|m|sigfig=2}}
→ 1,200 feet (370 m){{convert|1200|ft|m|sigfig=1}}
→ 1,200 feet (400 m)
Default behavior, for comparison:
{{convert|1200|ft|m}}
→ 1,200 feet (370 m)
Setting |sigfig=
to a value less than 1 is meaningless:
{{convert|1200|ft|m|sigfig=0}}
→ 1,200 feet (370 m)*
Round to a multiple of 5: 15, 20, 25, ...
Using |round=5
rounds the outcome to a multiple of 5.
{{convert|10|m|ft}}
→ 10 metres (33 ft){{convert|10|m|ft|round=5}}
→ 10 metres (35 ft)
Similar: using |round=25
rounds the outcome to a multiple of 25.
{{convert|10|m|ft}}
→ 10 metres (33 ft){{convert|10|m|ft|round=25}}
→ 10 metres (25 ft)
Default behavior, for comparison:
{{convert|10|m|ft|sigfig=4}}
→ 10 metres (32.81 ft)
In a range, one can round each value individually to the default. Use |round=each
:
{{convert|10 x 200 x 3000|m|ft}}
→ 10 by 200 by 3,000 metres (33 ft × 656 ft × 9,843 ft){{convert|10 x 200 x 3000|m|ft|round=each}}
→ 10 by 200 by 3,000 metres (33 ft × 660 ft × 9,800 ft)
Round to a multiple of a given fraction: 2+3⁄16 inch
Specify the desired denominator using |frac=<some positive integer>
. (Denominator is the below-the-slash number, for example the 3 in 1⁄3).
{{convert|5.56|cm|in|frac=16}}
→ 5.56 centimetres (2+3⁄16 in){{convert|8|cm|in|frac=4}}
→ 8 centimetres (3+1⁄4 in)
The fraction is reduced when possible:
{{convert|8|cm|in|frac=100}}
→ 8 centimetres (3+3⁄20 in)
Default behavior uses decimal notation:
{{convert|5.56|cm|in}}
→ 5.56 centimetres (2.19 in)
Rounding temperatures: °C, °F and K
In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.
{{convert|10,000|C|F K}}
→ 10,000 °C (18,000 °F; 10,300 K){{convert|10,000.1|C|F K}}
→ 10,000.1 °C (18,032.2 °F; 10,273.2 K){{convert|-272|C|F K}}
→ −272 °C (−457.60 °F; 1.15 K){{convert|-272|C}}
→ −272 °C (−457.60 °F){{convert|100|C|F K}}
→ 100 °C (212 °F; 373 K){{convert|0|C|F K}}
→ 0 °C (32 °F; 273 K)
The precision of the input number in example (1) is one digit, but the precision of its kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 0.1 degrees Celsius change is a 0.18 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow.
Result (1) seems off until you set the significant figures yourself with |sigfig=
:
{{convert|10000|C|sigfig=5}}
→ 10,000 °C (18,032 °F)
or you set the precision positionally, relative to the decimal point (zero being at the decimal point):
{{convert|10000|C|0}}
→ 10,000 °C (18,032 °F)
The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is six now, whereas before kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the kelvins conversion generated the fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the kelvins conversion.
Rounding input
There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}}
or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.
To round the input to a specified number of digits after the decimal point, use one of the parameters:
|adj=ri0
|adj=ri1
|adj=ri2
|adj=ri3
Note that it is not possible to round above the decimal place (|adj=ri-1
is invalid). Neither is there support for significant figures, multiples of a number, or any other output-rounding feature.
The default precision is computed based on the input, so an explicit output precision must usually be supplied:
{{convert|4.14159|mi|km|adj=ri0}}
→ 4 miles (6.66524 km) (precisions are mismatched){{convert|4.14159|mi|km|0|adj=ri0}}
→ 4 miles (7 km)
In this case, if the input were rounded before conversion, a different result would be obtained:
{{convert|{{#expr:4.14159 round 0}}|mi|km|0}}
→ 4 miles (6 km) (rounds intermediate calculation, giving a different result)
Into multiple units: 10 °C (50 °F; 283 K)
Separate the multiple output units by a space:
{{convert|10|C|F K}}
→ 10 °C (50 °F; 283 K){{convert|5|km|mi nmi}}
→ 5 kilometres (3.1 mi; 2.7 nmi)
If the output unit names contain spaces, use +
as the separator.
See also:
- For multiple-unit options like 1 ft 5 in, see § In input and § In output.
Ranges of values
A range converts two values and separates them by your choice of words and punctuation.
A range: 6 to 17 kg (13 to 37 lb)
Range indicators are entered as the second parameter (between the values). Range separators can be:
Separator | Convert | Result | Notes |
---|---|---|---|
-
|
{{convert|3|-|6|ft}}
|
3–6 feet (0.91–1.83 m) | Input can be hyphen (-) or en dash (–), output uses en dash |
– – (en dash)
|
{{convert|3|–|6|ft}}
|
3–6 feet (0.91–1.83 m) | |
and
|
{{convert|3|and|6|ft}}
|
3 and 6 feet (0.91 and 1.83 m) | |
and(-)
|
{{convert|3|and(-)|6|ft}}
|
3 and 6 feet (0.91–1.83 m) | |abbr=on abbreviates the first unit
|
and(-)|abbr=on
|
{{convert|3|and(-)|6|ft|abbr=on}}
|
3 and 6 ft (0.91–1.83 m) | |
or
|
{{convert|3|or|6|ft}}
|
3 or 6 feet (0.91 or 1.83 m) | |
to
|
{{convert|3|to|6|ft}}
|
3 to 6 feet (0.91 to 1.83 m) | |
to(-)
|
{{convert|3|to(-)|6|ft}}
|
3 to 6 feet (0.91–1.83 m) | |abbr=on abbreviates the first unit
|
to(-)|abbr=on
|
{{convert|3|to(-)|6|ft|abbr=on}}
|
3 to 6 ft (0.91–1.83 m) | |
to about
|
{{convert|3|to about|6|ft}}
|
3 to about 6 feet (0.91 to about 1.83 m) | |
+/-
|
{{convert|3|+/-|6|ft}}
|
3 ± 6 feet (0.91 ± 1.83 m) | |
± ±
|
{{convert|3|±|6|ft}}
|
3 ± 6 feet (0.91 ± 1.83 m) | |
+
|
{{convert|3|+|6|ft}}
|
3 + 6 feet (0.91 + 1.83 m) | |
,
|
{{convert|3|,|6|ft}}
|
3, 6 feet (0.91, 1.83 m) | |
, and
|
{{convert|3|, and|6|ft}}
|
3, and 6 feet (0.91, and 1.83 m) | |
, or
|
{{convert|3|, or|6|ft}}
|
3, or 6 feet (0.91, or 1.83 m) | |
by
|
{{convert|3|by|6|ft}}
|
3 by 6 feet (0.91 by 1.83 m) | |
x
|
{{convert|3|x|6|ft}}
|
3 by 6 feet (0.91 m × 1.83 m) | |abbr=on abbreviates and repeats the first unit
|
× ×
|
{{convert|3|×|6|ft}}
|
3 by 6 feet (0.91 m × 1.83 m) | |
x|abbr=on
|
{{convert|3|x|6|ft|abbr=on}}
|
3 ft × 6 ft (0.91 m × 1.83 m) | |
xx
|
|xx| is deprecated. Use |x| instead | ||
*
|
|*| is deprecated. Use |x| instead |
Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)
Use by
:
{{convert|6|by|12|ft|m}}
→ 6 by 12 feet (1.8 by 3.7 m)
Use ×
, multiplication sign, or x
, letter:
{{convert|6|x|12|m|ft}}
→ 6 by 12 metres (20 ft × 39 ft)
In science, the formal way is to set |x|
and |abbr=on
(keeping dimensions right, like in area = x km2):
{{convert|6|x|12|m|ft|abbr=on}}
→ 6 m × 12 m (20 ft × 39 ft)
Lists of values: 20, 40, or 60 miles
{{convert|20|,|40|, or|60|mi}}
→ 20, 40, or 60 miles (32, 64, or 97 km)
About feet, inch in ranges and multiples
While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:
{{convert|1|ft|3|in|x|3|ft|5|in|mm}}
→ 1 foot 3 inches ([convert: unknown unit])*
Default behavior, for comparison:
{{convert|1|ft|3|in|mm}}
→ 1 foot 3 inches (380 mm)
However, converting metric units into feet and inches with |order=flip
can produce the desired output:
{{convert|380|x|1040|mm|ftin|order=flip}}
→ 1 foot 3 inches by 3 feet 5 inches (380 mm × 1,040 mm)
Words
Spelling of unit name: international metre or US meter?
Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us
:
{{convert|1|m|ft}}
→ 1 metre (3.3 ft)—default{{convert|1|m|ft|sp=us}}
→ 1 meter (3.3 ft)
Spell out numbers: ten miles
To write a number in words, use |spell=in
:
{{convert|10|mi|m|spell=in}}
→ ten miles (16,000 m)
To spell out both in and out values, use |spell=on
:
{{convert|10|mi|m|spell=on}}
→ ten miles (sixteen thousand metres)
To make the first letter a capital, use |spell=In
, |spell=On
{{convert|10|mi|m|spell=In}}
→ Ten miles (16,000 m){{convert|10|mi|m|spell=On}}
→ Ten miles (sixteen thousand metres)
Inserted before units: 4 planted acres
{{convert|4|acre||adj=pre|planted}}
→ 4 planted acres (1.6 ha)
disp=preunit
is similar, but has no separator after the specified text, and can have different text for the output value:
{{convert|4|acre||disp=preunit|planted }}
→ 4 planted acres (1.6 planted ha){{convert|4|acre||disp=preunit|planted |reforested-}}
→ 4 planted acres (1.6 reforested-ha)
After adjective unit: A 10-foot-long corridor
Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.
{{convert|10|ft|m|adj=mid|-long}}
→ 10-foot-long (3.0 m)
Plurals: 1 inch, 2 inches
The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.
{{convert|1|metre}}
→ 1 metre (3 ft 3 in){{convert|2|metre}}
→ 2 metres (6 ft 7 in){{convert|2|metre|abbr=on}}
→ 2 m (6 ft 7 in)
- Exception
Entering the unit "foot" instead of "ft" forces singular output "foot", whatever the number is.
{{convert|100|foot|abbr=off}}
→ 100 foot (30 metres)
Fractions: one-eighth of an imperial pint
The convert template also supports spelling out fractions.
{{convert|3+1/2|oz|g|spell=in}}
→ three and a half ounces (99 g)
Any additional words needed for the fraction can also be added at the end of the template.
{{convert|1/8|imppt|ml|spell=in|adj=pre|of an}}
→ one-eighth of an imperial pint (71 ml)
Wrapping and line breaking
Spelling out "thousands", "millions", etc.
Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).
{{convert|100|e6mi|e6km}}
→ 100 million miles (160×10 6 km){{convert|120|e6acre}}
→ 120 million acres (490,000 km2){{convert|120|e6acre|e3km2}}
→ 120 million acres (490×10 3 km2)
To display both input and output in scientific notation, use |abbr=on
{{convert|100|e6mi|e6km|abbr=on}}
→ 100×10 6 mi (160×10 6 km)
To spell out "thousands", "millions", etc., |abbr=unit
abbreviates the unit; |abbr=off
displays both full unit names.
{{convert|100|e6mi|e6km|abbr=unit}}
→ 100 million mi (160 million km){{convert|100|e6mi|e6km|abbr=off}}
→ 100 million miles (160 million kilometres)
Numbers
Using an SI prefix: gigametre (Gm), or micrometre (μm)
Text | Symbol | Factor |
---|---|---|
quetta | Q | 1030 |
ronna | R | 1027 |
yotta | Y | 1024 |
zetta | Z | 1021 |
exa | E | 1018 |
peta | P | 1015 |
tera | T | 1012 |
giga | G | 109 |
mega | M | 106 |
kilo | k | 103 |
hecto | h | 102 |
deca | da | 101 |
(none) | 1 | |
deci | d | 10−1 |
centi | c | 10−2 |
milli | m | 10−3 |
micro | μ | 10−6 |
nano | n | 10−9 |
pico | p | 10−12 |
femto | f | 10−15 |
atto | a | 10−18 |
zepto | z | 10−21 |
yocto | y | 10−24 |
ronto | r | 10−27 |
quecto | q | 10−30 |
Units can have an SI prefix like G
before the unit: Gm
, and giga
before the name: gigametre
. These are plain multiplication factors.
To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:
- 12 Gm (1.2×1010 m)
- 12 μm (1.2×10−5 m)
The prefix can be added before the SI unit (here: unit m
for metre):
{{convert|12|Gm|mi|abbr=on}}
→ 12 Gm (7,500,000 mi)Mm
: 12 Mm (7,500 mi)km
: 12 km (39,000 ft)mm
: 12 mm (0.47 in)μm
: 12 μm (0.012 mm)um
: 12 μm (0.012 mm) (letter "u" can be used for "μ" here)
The prefix can be used in the output unit:
{{convert|12000|mi|Mm|abbr=on}}
→ 12,000 mi (19 Mm){{convert|12|in|μm|abbr=on}}
→ 12 in (300,000 μm)
As an exception, the non-SI unit "inch" can have the "μ" prefix too:
{{convert|12|μm|μin|abbr=on}}
→ 12 μm (470 μin)
Engineering notation: 7 million km
Engineering notation can be entered with a prefix to the unit:
{{convert|70|e6m}}
→ 70 million metres (230,000,000 ft){{convert|70|e6m|abbr=on}}
→ 70×10 6 m (230,000,000 ft)
The same is possible for the output unit:
{{convert|230,000,000|ft|e6m}}
→ 230,000,000 feet (70×10 6 m)
The prefixes are:
e3
(thousand)e6
(million)e9
(billion)e12
(trillion)e15
(quadrillion)
Engineering notation may use "e" or "E", for example, e3km
or E3km
. Using uppercase E3km
displays the factor as a word ("thousand") rather than as ×103. Using lowercase e3km
displays the word if abbr=unit
is used, or if abbr=off
applies to the unit.
{{convert|70|e6m|e6ft}}
→ 70 million metres (230×10 6 ft){{convert|70|e6m|e6ft|abbr=off}}
→ 70 million metres (230 million feet){{convert|70|e6m|e6ft|abbr=unit}}
→ 70 million m (230 million ft){{convert|70|E6m|e6ft|abbr=in}}
→ 70 million m (230 million feet)
Scientific notation: 1.23 × 10−14
In scientific notation, a number is written like 1.23×10−14. The plain number has exactly one digit before the decimal point.
With {{convert}}, the input can be in e-notation such as 12.3e4
. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.
{{convert|12.3e-15|atm|atm|abbr=on}}
→ 12.3×10−15 atm (1.23×10−14 atm){{convert|0.00000005|atm|atm|abbr=on}}
→ 0.00000005 atm (5.0×10−8 atm)
Input with fractions: 1+1⁄2 inches (38.1 mm)
The number to convert can be written in fractions. Both /
(keyboard slash) and ⁄
(fraction slash) are accepted:
{{convert|1/2|in|mm|1}}
→ 1⁄2 inch (12.7 mm){{convert|1⁄2|in|mm|1}}
→ 1⁄2 inch (12.7 mm)
With positive mixed numbers (a positive integer and a fraction), use a +
sign
{{convert|2+1⁄2|in|mm|1}}
→ 2+1⁄2 inches (63.5 mm)
With negative mixed numbers, use a hyphen -
and repeat it:
{{convert|-2-1⁄2|in|mm|1}}
→ −2+1⁄2 inches (−63.5 mm)
Note that the following cases are not interpreted as mixed numbers:
{{convert|2-1⁄2|in|mm|1}}
→ 2–1⁄2 inch (50.8–12.7 mm). This is interpreted as a range from 2 inches to 1⁄2 inch.{{convert|-2+1⁄2|in|mm|1}}
→ [convert: invalid number] This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.{{convert|2+½|in|mm|1}}
→ [convert: invalid number] Fractions consisting of a single Unicode character are not allowed either.
Horizontal fraction bar: 1/2 inch
Using a double slash (//
) provides a horizontal fraction bar for the original (input) unit:
{{convert|1//2|in|mm|1}}
→ 1/2 inch (12.7 mm){{convert|6+3//8|in|mm|1}}
→ 6+3/8 inches (161.9 mm)
Using a negative value for |frac=
provides a horizontal fraction bar for the converted (output) unit:
{{convert|12.7|mm|frac=-2}}
→ 12.7 millimetres (1/2 in){{convert|161.9|mm|frac=-8}}
→ 161.9 millimetres (6+3/8 in)
Thousands separator: 1,000 mi or 1000 mi
In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:
{{convert|1234567|m|ft}}
→ 1,234,567 metres (4,050,417 ft){{convert|1,234,567|m|ft}}
→ 1,234,567 metres (4,050,417 ft)
Set |comma=off
to remove the separator from the output:
{{convert|1234567|m|ft|comma=off}}
→ 1234567 metres (4050417 ft)
Use |comma=gaps
to use digit grouping by gap (thin space) as a thousands separator:
{{convert|1234567|m|ft|comma=gaps}}
→ 1234567 metres (4050417 ft)
Default behavior, for comparison:
{{convert|1234567|m|ft}}
→ 1,234,567 metres (4,050,417 ft)
Setting |comma=5
will only add the separator when the number of digits is 5 or more:
{{convert|1234|m|ft|comma=5}}
→ 1234 metres (4049 ft){{convert|1234567|m|ft|comma=5}}
→ 1,234,567 metres (4,050,417 ft)
Default behavior, for comparison:
{{convert|1234|m|ft}}
→ 1,234 metres (4,049 ft)
Output manipulation
Brackets and separators: 10 m [33 ft]
Punctuation that distinguishes the two measurements is set by |disp=
.
Options are: b
(the default), sqbr
, comma
, semicolon
, or
, br
, br()
, x|…
:
{{convert|10|m|ft|disp=sqbr}}
→ 10 metres [33 ft]{{convert|10|m|ft|disp=comma}}
→ 10 metres, 33 ft{{convert|10|m|ft|disp=semicolon}}
→ 10 metres; 33 ft{{convert|10|m|ft|disp=or}}
→ 10 metres or 33 feet
Default behavior, for comparison:
{{convert|10|m|ft}}
→ 10 metres (33 ft)
Setting |disp=br
will force a new line (<br/>
)
{{convert|10|m|ft|disp=br}}
→ 10 metres
33 feet
Also |disp=br()
will force a new line, and keep the brackets (useful in tables):
{{convert|10|m|ft|disp=br()}}
→ 10 metres
(33 feet)
Setting |disp=x|…
allows any text as separator:
{{convert|10|m|ft|disp=x|_MyText_}}
→ 10 metres_MyText_33 ft (To display spaces, use
)
Flipping (reordering) the two measurements: 1,609.3 metres (1 mile)
Setting |order=flip
will flip (swap) the two measurements:
{{convert|1|mi|m|order=flip}}
→ 1,609.3 metres (1 mile)
Default behavior, for comparison:
{{convert|1|mi|m}}
→ 1 mile (1,609.3 metres)
When converting to multiple units, the effect is:
{{convert|10|km|mi nmi|order=flip}}
→ 6.2137 miles; 5.3996 nautical miles (10 kilometres){{convert|10|km|nmi mi|order=flip}}
→ 5.3996 nautical miles; 6.2137 miles (10 kilometres)
Fixed ordering of output units: 212 °F (100 °C; 373 K)
Setting |order=out
shows the output-units as ordered; the input unit is skipped:
{{convert|100|C|F C K|abbr=on|order=out}}
→ 212 °F (100 °C; 373 K){{convert|200|PS|kW hp|0|abbr=on|order=out}}
→ 147 kW (197 hp)
See also: § Displaying parts of the output.
Displaying parts of the result: 2 (1.5)
It is possible to display only parts of the conversion result: The following examples show how to display only a part of the result.
- Note: in Convert, abbr is synonym for unit symbol
Convert | Returns | Components |
---|---|---|
{{convert|2|cuyd|m3}}
|
2 cubic yards (1.5 m3) | all (default conversion) |
{{convert|2|cuyd|m3|abbr=on}}
|
2 cu yd (1.5 m3) | all (default conversion, abbr) |
{{convert|2|cuyd|m3|abbr=values}}
|
2 (1.5) | numbers only |
{{convert|2|cuyd|cuyd|disp=out}}
|
2.0 cu yd | input value (workaround) |
{{convert|2|cuyd|cuyd|disp=out|abbr=on}}
|
2.0 cu yd | input value abbr (workaround) |
{{convert|2|cuyd|m3|disp=unit}}
|
cubic yards | input unit |
{{convert|2|cuyd|m3|disp=unit|adj=on}}
|
cubic-yard | input unit, adjectival (hyphenated) |
{{convert|2|cuyd|m3|disp=unit|adj=on|abbr=on}}
|
cu yd | input unit, adjectival (abbr so not hyphenated) |
{{convert|2|cuyd|m3|disp=unit|abbr=on}}
|
cu yd | input unit abbr |
{{convert|2|cuyd|m3|disp=out}}
|
1.5 m3 | output value, symbols |
{{convert|2|cuyd|m3|disp=out|abbr=off}} |
1.5 cubic metres | output value, names |
{{convert|2|cuyd|m3|disp=out|adj=on}} |
1.5-cubic-metre | output, adjective |
{{convert|2|cuyd|m3|disp=number}} |
1.5 | output number |
{{convert|2|cuyd|m3|disp=unit2}} |
m3 | output unit (abbr by default) |
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} |
cubic metres | output unit (name) |
{{convert|2|cuyd|m3|disp=unit2|abbr=on}} |
m3 | output unit (abbr) |
Display both input name and symbol: 2 kilopascals [kPa]
Setting |abbr=~
returns both name and symbol of the first (input) unit:
{{convert|2|kPa|psi|abbr=~}}
→ 2 kilopascals [kPa] (0.29 psi)A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure
→ A 2-kilopascal [kPa] (0.29 psi) pressure
Table options
For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.
Enforced line break
|disp=br
adds a line-break and omits brackets.
|disp=br()
adds a line-break and does add brackets to the converted value. This may be useful in tables:
|disp=br |
|disp=br()
|
---|---|
100 kilometres 62 miles |
100 kilometres (62 miles) |
Table columns
Using {convert} in a table cell, with |disp=table
splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr=
parameter. Multiple-unit outputs, like ftin
, always output their units to the table.
{{convert|10|m|ft|disp=table}}
→
style="text-align:right;"|10
|style="text-align:right;"|33
|disp=tablecen
does the same, and also centers the text:
{{convert|20|m|ft|disp=tablecen}}
→
style="text-align:center;"|20
|style="text-align:center;"|66
The units are added as a column header:
kilograms pounds stone and pounds |disp=table
10 22 1 st 8 lb |disp=table
and|abbr=on
20 kg 44 lb 3 st 2 lb |disp=table
and|abbr=off
30 kilograms 66 pounds 4 stone 10 pounds |disp=tablecen
40 88 6 st 4 lb |disp=<other>
(default)50 kilograms (110 lb; 7 st 12 lb)
Sorting
Use |sortable=on
to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:
{{convert|10|m|ft|sortable=on}}
→<span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)
- showing: 10 metres (33 ft).
Use both |disp=table
and |sortable=on
together to produce table columns (pipe symbols) for each value in sortable columns:
m m ft A 15.75 m 15+3⁄4 52 B 15.5 m 15.5 51 C 16 m 16.0 52.5 D 16 m 16 52
The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.
Units
The conversion factors and physical constants are sourced here.
All units
The table below lists units supported by {{convert}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.
{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:
{{convert|100|kg|lb}}
→ 100 kilograms (220 lb){{convert|100|lb|kg}}
→ 100 pounds (45 kg)
The unit-codes should be treated as case-sensitive:
{{convert|100|Mm|mm}}
→ 100 megametres (1.0×1011 mm)
The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.
{{convert|55|nmi|km mi}}
→ 55 nautical miles (102 km; 63 mi){{convert|1|oz|ozt g gr}}
→ 1 ounce (0.91 ozt; 28 g; 440 gr)
Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F
(F
). Either may be entered for Fahrenheit (but not a lower-case f).
Units
Explanation
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
the system(s) to which the unit belongs | units listed by name | unit-code to use in template | symbols shown in output | other notes about the units | sample of the default conversion for the unit | output codes for multiple conversions |
Area
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | square kilometre | km2 | km2 | US spelling: square kilometer |
1.0 km2 (0.39 sq mi) |
| |
square metre | m2 | m2 | US spelling: square meter |
1.0 m2 (11 sq ft) |
| ||
square centimetre | cm2 | cm2 | US spelling: square centimeter |
1.0 cm2 (0.16 sq in) |
| ||
square millimetre | mm2 | mm2 | US spelling: square millimeter |
1.0 mm2 (0.0016 sq in) |
| ||
non-SI metric | hectare | ha | ha | 1.0 ha (2.5 acres) | |||
Imperial & US customary |
square mile | sqmi | sq mi | 1.0 sq mi (2.6 km2) |
| ||
acre | acre | (none) | 1.0 acre (0.40 ha) | ||||
square yard | sqyd | sq yd | 1.0 sq yd (0.84 m2) | ||||
square foot | sqft (sqfoot) |
sq ft | long code "sqfoot" outputs square foot (and never feet) | 1.0 sq ft (0.093 m2) |
| ||
square inch | sqin | sq in | 1.0 sq in (6.5 cm2) |
| |||
Other | square nautical mile | sqnmi | sq nmi | 1.0 sq nmi (3.4 km2; 1.3 sq mi) | |||
dunam | dunam | (none) | For alternative spellings and definitions see the full list | 1.0 dunam (0.0010 km2; 0.00039 sq mi) | |||
tsubo | tsubo | (none) | 1.0 tsubo (3.3 m2) |
Density
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
Metric | kilogram per cubic metre | kg/m3 | kg/m3 | 1.0 kg/m3 (1.7 lb/cu yd) |
| ||
gram per cubic metre | g/m3 | g/m3 | 1.0 g/m3 (0.0017 lb/cu yd) |
| |||
Imperial & US customary |
pound per cubic foot | lb/ft3 | lb/cu ft | 1.0 lb/cu ft (0.016 g/cm3) |
| ||
pound per cubic yard | lb/yd3 | lb/cu yd | 1.0 lb/cu yd (0.59 kg/m3) |
|
Energy
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | gigajoule | GJ | GJ | 1.0 GJ (280 kWh) | |||
megajoule | MJ | MJ | 1.0 MJ (0.28 kWh) | ||||
kilojoule | kJ | kJ | 1.0 kJ (240 cal) | ||||
hectojoule | hJ | hJ | 1.0 hJ (24 cal) | ||||
decajoule | daJ | daJ | 1.0 daJ (2.4 cal) | ||||
joule | J | J | 1.0 J (0.24 cal) | ||||
decijoule | dJ | dJ | 1.0 dJ (0.024 cal) | ||||
centijoule | cJ | cJ | 1.0 cJ (0.0024 cal) | ||||
millijoule | mJ | mJ | 1.0 mJ (0.00024 cal) | ||||
microjoule | μJ (uJ) | μJ | 1.0 μJ (2.4×10−7 cal) | ||||
nanojoule | nJ | nJ | 1.0 nJ (2.4×10−10 cal) | ||||
cgs | megaerg | Merg | Merg | 1.0 Merg (0.10 J) | |||
kiloerg | kerg | kerg | 1.0 kerg (0.10 mJ) | ||||
erg | erg | (none) | 1.0 erg (0.10 μJ) | ||||
Watt-hour multiples | terawatt-hour | TWh | TWh | 1.0 TWh (3.6 PJ) | |||
TW.h | TW⋅h | ||||||
gigawatt-hour | GWh | GWh | 1.0 GWh (3.6 TJ) | ||||
GW.h | GW⋅h | ||||||
megawatt-hour | MWh | MWh | 1.0 MWh (3.6 GJ) | ||||
MW.h | MW⋅h | ||||||
kilowatt-hour | kWh | kWh | 1.0 kWh (3.6 MJ) | ||||
kW.h | kW⋅h | ||||||
watt-hour | Wh | Wh | 1.0 Wh (3.6 kJ) | ||||
W.h | W⋅h | ||||||
Electron- volt multiples | |||||||
gigaelectronvolt | GeV | GeV | 1.0 GeV (0.16 nJ) | ||||
megaelectronvolt | MeV | MeV | 1.0 MeV (0.16 pJ) | ||||
kiloelectronvolt | keV | keV | 1.0 keV (0.16 fJ) | ||||
electronvolt | eV | eV | 1.0 eV (0.16 aJ) | ||||
millielectronvolt | meV | meV | 1.0 meV (0.16 zJ) | ||||
Calorie multiples | calorie | Cal | Cal | The thermo-chemical calorie is the default definition. For others, see the full list. | 1.0 Cal (4.2 kJ) | ||
megacalorie | Mcal | Mcal | 1.0 Mcal (4.2 MJ) | ||||
kilocalorie | kcal | kcal | 1.0 kcal (4.2 kJ) | ||||
calorie | cal | cal | 1.0 cal (4.2 J) | ||||
millicalorie | mcal | mcal | 1.0 mcal (4.2 mJ) | ||||
pound/ ounce-foot/ inch-hour-minute-second |
foot-poundal | ftpdl | ft⋅pdl | 1.0 ft⋅pdl (0.042 J) | |||
foot-pound force | ftlbf | ft⋅lbf | 1.0 ft⋅lbf (1.4 J) | ||||
ftlb-f | ft⋅lbf | ||||||
inch-pound force | inlbf | in⋅lbf | 1.0 in⋅lbf (110 mJ) | ||||
inlb-f | in⋅lbf | ||||||
inch-ounce force | inozf | in⋅ozf | 1.0 in⋅ozf (7.1 mJ) | ||||
inoz-f | in⋅ozf | ||||||
horsepower-hour | hph | hp⋅h | 1.0 hp⋅h (0.75 kWh) | ||||
British thermal unit | British thermal unit | Btu | Btu | The International Steam Table British thermal unit is used. For others, see the full list. | 1.0 Btu (1.1 kJ) | ||
BTU | BTU | ||||||
TNT-based units | gigatonne of TNT | GtTNT | (none) | 1.0 gigatonne of TNT (4.2 EJ) | |||
gigaton of TNT | GtonTNT | (none) | |||||
megatonne of TNT | MtTNT | (none) | 1.0 megatonne of TNT (4.2 PJ) | ||||
megaton of TNT | MtonTNT | Mt | |||||
kilotonne of TNT | ktTNT | (none) | 1.0 kilotonne of TNT (4.2 TJ) | ||||
kiloton of TNT | ktonTNT | kt | |||||
tonne of TNT | tTNT | (none) | 1.0 tonne of TNT (4.2 GJ) | ||||
ton of TNT | tonTNT | (none) | |||||
Other | |||||||
Hartree | Eh | Eh | 1.0 Eh (27 eV) | ||||
rydberg | Ry | Ry | 1.0 Ry (14 eV) | ||||
tonne of oil equivalent | toe | toe | 1.0 toe (42 GJ) | ||||
barrel of oil equivalent | BOE | BOE | 1.0 BOE (6.1 GJ) | ||||
cubic foot of natural gas | cuftnaturalgas (cufootnaturalgas) | Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural. | 1.0 cubic foot of natural gas (1.1 MJ) |
Force
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | giganewton | GN | GN | Allows triple output units. See: full list. | 1.0 GN (220,000,000 lbf) |
| |
meganewton | MN | MN | Allows triple output units. See: full list. | 1.0 MN (220,000 lbf) |
| ||
kilonewton | kN | kN | Allows triple output units. See: full list. | 1.0 kN (220 lbf) |
| ||
newton | N | N | 1.0 N (0.22 lbf) |
| |||
millinewton | mN | mN | 1.0 mN (0.0036 ozf) |
| |||
micronewton | μN (uN) | μN | 1.0 μN (0.0016 grf) |
| |||
nanonewton | nN | nN | 1.0 nN (1.6×10−6 grf) |
| |||
cgs | megadyne | Mdyn | Mdyn | 1.0 Mdyn (2.2 lbf) | |||
kilodyne | kdyn | kdyn | 1.0 kdyn (0.036 ozf) | ||||
dyne | dyn (dyne) |
dyn | 1.0 dyn (0.016 grf) | ||||
millidyne | mdyn | mdyn | 1.0 mdyn (1.6×10−5 grf) | ||||
Metric gravitational units | tonne-force | t-f | tf | 1.0 tf (9.8 kN; 0.98 LTf; 1.1 STf) | |||
tf | tf | ||||||
kilogram-force | kg-f | kgf | 1.0 kgf (9.8 N; 2.2 lbf) | ||||
kgf | kgf | ||||||
gram-force | g-f | gf | 1.0 gf (9.8 mN; 0.035 ozf) | ||||
gf | gf | ||||||
milligram-force | mg-f | mgf | 1.0 mgf (9.8 μN; 0.015 grf) | ||||
mgf | mgf | ||||||
Avoirdupois-based units | poundal | pdl | pdl | 1.0 pdl (0.14 N) | |||
long ton-force | LT-f | LTf | 1.0 LTf (10.0 kN) |
| |||
LTf | long ton-force |
| |||||
short ton-force | ST-f | STf | 1.0 STf (8.9 kN) |
| |||
STf | short ton-force |
| |||||
pound-force | lb-f | lbf | 1.0 lbf (4.4 N) | ||||
lbf | lbf | ||||||
grain-force | gr-f | grf | 1.0 grf (640 μN) | ||||
grf | grf |
Length
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | megametre | Mm | Mm | US spelling: megameter |
1.0 Mm (620 mi) | ||
kilometre | km | km | US spelling: kilometer |
1.0 km (0.62 mi) |
| ||
metre | m | m | US spelling: meter |
1.0 m (3 ft 3 in) |
| ||
centimetre | cm | cm | US spelling: centimeter |
1.0 cm (0.39 in) |
| ||
millimetre | mm | mm | US spelling: millimeter |
1.0 mm (0.039 in) |
| ||
micrometre | μm (um) | μm | US spelling: micrometer |
1.0 μm (3.9×10−5 in) | |||
nanometre | nm | nm | US spelling: nanometer |
1.0 nm (3.9×10−8 in) | |||
non-SI metric | ångström | Å (angstrom) |
Å | 1.0 Å (3.9×10−9 in) | |||
Imperial & US customary |
mile | mi | mi | 1.0 mi (1.6 km) |
| ||
furlong | furlong | (none) | 1.0 furlong (660 ft; 200 m) | ||||
chain | chain | (none) | 1.0 chain (66 ft; 20 m) | ||||
rod | rd | rd | For other names of this unit see the full list. | 1.0 rd (17 ft; 5.0 m) | |||
fathom | fathom | (none) | fathom ≡ 6 ft | 1.0 fathom (6.0 ft; 1.8 m) | |||
yard | yd | yd | assumes the international definition | 1.0 yd (0.91 m) | |||
foot | ft (foot) | ft | long code "foot" outputs foot (and never feet)
Use of ′ and ″ symbols violates MOSNUM so is not provided. |
1.0 ft (0.30 m) |
| ||
inch | in | in | Use of ′ and ″ symbols violates MOSNUM so is not provided. | 1.0 in (25 mm) |
| ||
Other | nautical mile | nmi | nmi | the international standard nautical mile For other nautical miles see the full list. |
1.0 nmi (1.9 km; 1.2 mi) | ||
parsec | pc | pc | 1.0 pc (3.3 ly) | ||||
light-year | ly | ly | 1.0 ly (63,000 AU) | ||||
astronomical unit | AU | AU | 1.0 AU (150,000,000 km; 93,000,000 mi) |
Mass
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | kilogram | kg | kg | Allows triple output units. See: full list. | 1.0 kg (2.2 lb) |
| |
gram | g | g | 1.0 g (0.035 oz) |
| |||
milligram | mg | mg | 1.0 mg (0.015 gr) |
| |||
microgram | μg (ug) | μg | 1.0 μg (1.5×10−5 gr) | ||||
non-SI metric | tonne | t | t | Allows triple output units. See: full list. | 1.0 t (0.98 long tons; 1.1 short tons) |
| |
metric ton | MT | t |
| ||||
Avoirdupois | long ton | LT | (none) | 2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list. |
1.0 long ton (1.0 t) |
| |
long ton | long ton | ||||||
short ton | ST | (none) | 2,000 lb used mostly in the US. Allows triple output units. See: full list. |
1.0 short ton (0.91 t) |
| ||
short ton | short ton | ||||||
stone | st | st | 14 lb used previously in the British Commonwealth except Canada. Allows triple output units. See: full list. |
1.0 st (14 lb; 6.4 kg) |
| ||
pound | lb | lb | Allows triple output units. See: full list. | 1.0 lb (0.45 kg) |
| ||
ounce | oz | oz | 1.0 oz (28 g) |
| |||
drachm | drachm | (none) | 1.0 drachm (1.8 g) | ||||
drachm | dram | (none) | |||||
grain | gr | gr | equivalent to the troy grain | 1.0 gr (0.065 g) | |||
Troy | troy ounce | ozt | ozt | 1.0 ozt (1.1 oz; 31 g) | |||
other | carat | carat | (none) | 1.0 carat (0.20 g) |
Speed
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | metre per second | m/s | m/s | US spelling: meter per second |
1.0 m/s (3.3 ft/s) |
| |
non-SI metric | kilometre per hour | km/h | km/h | US spelling: kilometer per hour |
1.0 km/h (0.62 mph) |
| |
Imperial & US customary |
mile per hour | mph | mph | 1.0 mph (1.6 km/h) |
| ||
foot per second | ft/s (foot/s) | ft/s | long code "foot/s" outputs foot per second (and never feet) | 1.0 ft/s (0.30 m/s) |
| ||
Maritime units | knot | kn (knot) | kn | 1.0 kn (1.9 km/h; 1.2 mph) |
|
Temperature
system | unit | unit- code |
symbol | notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | K | K | K | Allows triple output units. See: full list. | 1.0 K (−272.15 °C; −457.87 °F) |
| |
°C | °C (C) | °C | 1.0 °C (33.8 °F) |
| |||
Imperial & US customary |
°R | °R (R) | °R | 1.0 °R (0.556 K; −458.670 °F; −272.594 °C) |
| ||
°F | °F (F) | °F | 1.0 °F (−17.2 °C) |
| |||
Celsius change | C-change | Used for temperature intervals instead of actual temperatures Example: {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer | |||||
Fahrenheit change | F-change | Used for temperature intervals instead of actual temperatures Example: {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder |
Torque
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
Industrial | |||||||
SI | newton-metre | Nm | N⋅m | Triple combinations are also possible. See the full list. | 1.0 N⋅m (0.74 lbf⋅ft) |
| |
Non-SI metric | kilogram metre | kg.m | kg⋅m | 1.0 kg⋅m (9.8 N⋅m; 7.2 lb⋅ft) |
| ||
Imperial & US customary |
pound force-foot | lb.ft | lb⋅ft | 1.0 lb⋅ft (1.4 N⋅m) |
| ||
Scientific | |||||||
SI | newton-metre | N.m | N⋅m | Triple combinations are also possible. See the full list. | 1.0 N⋅m (0.74 lbf⋅ft) |
| |
Non-SI metric | kilogram force-metre | kgf.m | kgf⋅m | 1.0 kgf⋅m (9.8 N⋅m; 7.2 lbf⋅ft) |
| ||
Imperial & US customary |
pound force-foot | lbf.ft | lbf⋅ft | 1.0 lbf⋅ft (1.4 N⋅m) |
|
Volume
system | unit | unit- code |
symbol or abbrev. |
notes | sample default conversion |
combination output units | |
---|---|---|---|---|---|---|---|
SI | cubic metre | m3 | m3 | US spelling: cubic meter one kilolitre |
1.0 m3 (35 cu ft) | ||
cubic centimetre | cm3 | cm3 | US spelling: cubic centimeter one millilitre |
1.0 cm3 (0.061 cu in) | |||
cc | cc | ||||||
cubic millimetre | mm3 | mm3 | US spelling: cubic millimeter |
1.0 mm3 (6.1×10−5 cu in) | |||
non-SI metric | kilolitre | kl | kl | US spelling: kiloliter one cubic metre |
1.0 kl (35 cu ft) | ||
kL | kL | ||||||
litre | l | L | US spelling: liter one cubic decimetre Allows triple output units. See: full list. |
1.0 L (0.22 imp gal; 0.26 US gal) |
| ||
L | L |
| |||||
centilitre | cl | cl | US spelling: centiliter |
1.0 cl (0.35 imp fl oz; 0.34 US fl oz) | |||
cL | cL | ||||||
millilitre | ml | ml | US spelling: milliliter one cubic centimetre |
1.0 ml (0.035 imp fl oz; 0.034 US fl oz) |
| ||
mL | mL |
| |||||
Imperial & US customary |
cubic yard | cuyd | cu yd | 1.0 cu yd (0.76 m3) | |||
cubic foot | cuft (cufoot) | cu ft | long code "cufoot" outputs cubic foot (and never feet) | 1.0 cu ft (0.028 m3) | |||
cubic inch | cuin | cu in | 1.0 cu in (16 cm3) | ||||
Imperial | imperial barrel | impbbl | imp bbl | 36 imp gal | 1.0 imp bbl (160 L; 36 imp gal; 43 US gal) | ||
imperial bushel | impbsh | imp bsh | 8 imp gal | 1.0 imp bsh (36 L; 8.0 imp gal; 8.3 US dry gal) | |||
impbu | imp bu | ||||||
imperial gallon | impgal | imp gal | 4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list. |
1.0 imp gal (4.5 L; 1.2 US gal) |
| ||
imperial quart | impqt | imp qt | 1/4 imp gal or 40 imp fl oz | 1.0 imp qt (1,100 ml; 38 US fl oz) | |||
imperial pint | imppt | imp pt | 1/8 imp gal or 20 imp fl oz | 1.0 imp pt (0.57 L) | |||
imperial fluid ounce | impoz (impfloz) | imp fl oz | 1/160 imp gal | 1.0 imp fl oz (28 ml; 0.96 US fl oz) |
| ||
US customary liquid measure |
US barrel | USbbl | US bbl | 31½ US gal used for liquids except for oil and beer (see the full list) |
1.0 US bbl (120 L; 32 US gal; 26 imp gal) | ||
U.S.bbl | U.S. bbl | ||||||
barrel | oilbbl | bbl | 42 US gal | 1.0 bbl (0.16 m3) | |||
US beer barrel | USbeerbbl (usbeerbbl) |
US bbl | 1.0 US bbl (120 L; 31 US gal; 26 imp gal) | ||||
U.S.beerbbl (usbeerbbl) |
U.S. bbl | ||||||
US gallon | USgal | US gal | 231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list. |
1.0 US gal (3.8 L; 0.83 imp gal) |
| ||
U.S.gal | U.S. gal |
| |||||
US quart | USqt | US qt | 1/4 US gal or 32 US fl oz | 1.0 US qt (950 ml) | |||
U.S.qt | U.S. qt | ||||||
US pint | USpt | US pt | 1/8 US gal or 16 US fl oz | 1.0 US pt (0.47 L; 0.83 imp pt) | |||
U.S.pt | U.S. pt | ||||||
US fluid ounce | USoz (USfloz) |
US fl oz | 1/128 US gal | 1.0 US fl oz (30 ml) |
| ||
U.S.oz (U.S.floz) |
U.S. fl oz |
| |||||
US customary dry measure |
US dry barrel | USdrybbl | US dry bbl | 105/32 US bsh | 1.0 US dry bbl (0.12 m3) | ||
U.S.drybbl | U.S. dry bbl | ||||||
US bushel | USbsh | US bsh | 2150.42 cubic inches by definition | 1.0 US bsh (35 L; 8.0 US dry gal; 7.8 imp gal) | |||
U.S.bsh | U.S. bsh | ||||||
US bushel | USbu | US bu | 2150.42 cubic inches by definition | 1.0 US bu (35 L; 8.0 US dry gal; 7.8 imp gal) | |||
U.S.bu | U.S. bu | ||||||
US dry gallon | USdrygal | US dry gal | 1/8 US bsh Allows triple output units. See: full list. |
1.0 US dry gal (4.4 L) |
| ||
U.S.drygal | U.S. dry gal |
| |||||
US dry quart | USdryqt | US dry qt | 1/32 US bsh | 1.0 US dry qt (1,100 ml) | |||
U.S.dryqt | U.S. dry qt | ||||||
US dry pint | USdrypt | US dry pt | 1/32 US bsh | 1.0 US dry pt (550 ml) | |||
U.S.drypt | U.S. dry pt |
Extra
unit | unit- code |
symbol or abbrev. |
sample default conversion |
||||
---|---|---|---|---|---|---|---|
gigapascal | GPa | GPa | 1.0 GPa (150,000 psi) | ||||
megapascal | MPa | MPa | 1.0 MPa (150 psi) | ||||
kilopascal | kPa | kPa | 1.0 kPa (0.15 psi) | ||||
hectopascal | hPa | hPa | 1.0 hPa (0.015 psi) | ||||
pascal | Pa | Pa | 1.0 Pa (0.00015 psi) | ||||
millipascal | mPa | mPa | 1.0 mPa (1.5×10−7 psi) | ||||
millibar | mbar | mbar | 1.0 mbar (1.0 hPa) | ||||
mb | mb | ||||||
decibar | dbar | dbar | 1.0 dbar (10 kPa) | ||||
bar | bar | (none) | 1.0 bar (100 kPa) | ||||
kilobarye | kBa | kBa | 1.0 kBa (1.0 hPa) | ||||
barye | Ba | Ba | 1.0 Ba (0.10 Pa) | ||||
standard atmosphere | atm | atm | 1.0 atm (100 kPa) | ||||
torr | Torr | Torr | 1.0 Torr (0.13 kPa) | ||||
millimetre of mercury | mmHg | mmHg | 1.0 mmHg (0.13 kPa) | ||||
inch of mercury | inHg | inHg | 1.0 inHg (3.4 kPa) | ||||
pound per square inch | psi | psi | 1.0 psi (6.9 kPa) |
Fuel efficiency
unit | unit- code |
notes | combinations | ||||
---|---|---|---|---|---|---|---|
kilometres per litre | km/l (km/L) | Use km/L to get "km/L"
|
| ||||
litres per 100 kilometres | l/100 km (L/100 km) | Use L/100 km to get "L/100 km"
|
| ||||
litres per kilometre | l/km (L/km) | Use L/km to get "L/km"
|
| ||||
miles per imperial gallon | mpgimp |
| |||||
miles per US gallon | mpgus (mpgUS, mpgU.S.) | Use mpgUS to get "US"Use |
| ||||
imperial gallons per mile | impgal/mi |
| |||||
US gallons per mile | usgal/mi (USgal/mi, U.S.gal/mi) | As above with the us vs US vs U.S.
|
| ||||
The mpgUS , mpgU.S. , USgal/mi vs U.S.gal/mi , km/L , L/100 km and L/km variants work within combinations also (making 36 combinations in total).
|
Population density
unit | unit- code |
notes | combinations | ||||
---|---|---|---|---|---|---|---|
inhabitants per square kilometre | PD/km2 | PD stands for population density, i.e. humans (inhabitants)
|
| ||||
per square kilometre | /km2 | Used when the word 'inhabitants' would be inappropriate. |
| ||||
inhabitants per hectare | PD/ha |
| |||||
per hectare | /ha |
| |||||
inhabitants per square mile | PD/sqmi | PD stands for population density, i.e. humans (inhabitants)
|
| ||||
per square mile | /sqmi | Used when the word 'inhabitants' would be inappropriate. |
| ||||
inhabitants per acre | PD/acre |
| |||||
per acre | /acre |
|
Cost per unit mass
unit | unit- code |
notes | combinations | ||||
---|---|---|---|---|---|---|---|
dollars per pound | $/lb | "$" can mean US$, HK$, etc. |
| ||||
dollars per kilogram | $/kg |
| |||||
dollars per troy ounce | $/ozt | 12 troy ounces in 1 troy pound |
|
'per' units: kg/ha, miles per gallon
When using a slash (/
), a unit like kg/ha
is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.
{{convert|1000|kg/ha}}
→ 1,000 kilograms per hectare (890 lb/acre){{convert|350|/in2}}
→ 350 per square inch (54/cm2)
Population density (inhabitants per square mile) can be converted using
{{convert|10|PD/sqmi|PD/km2}}
→ 10 inhabitants per square mile (3.9/km2)
Vehicular fuel efficiency, commonly expressed in miles per gallon or litres per 100 km can also be converted
{{convert|26|mpgUS|l/100km mpgimp}}
→ 26 miles per US gallon (9.0 l/100 km; 31 mpg‑imp)
Units of difference: Expressing a change or difference in temperature
We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:
{{convert|10|C}}
→ 10 °C (50 °F) (standard temperature conversion){{convert|10|-|15|C}}
→ 10–15 °C (50–59 °F) (standard temperature range conversion)
When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C
, |F
and |K
), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change
, |F-change
and |K-change
.
Compare the following two examples with the two above:
{{convert|10|C-change}}
→ 10 °C (18 °F) increase in temperature{{convert|10|-|15|C-change}}
→ 10–15 °C (18–27 °F) warmer than normal
To produce multiple units in the output:
{{convert|10|C-change|F-change K-change}}
→ 10 °C (18 °F; 10 K) difference
Multiple units: 1 ft 5 in
In input
Base document § Input multiples lists options for multiple unit input (like ft,in
). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):
{{convert|1|yd|2|ft|3|in}}
→ 1 yard 2 feet 3 inches (1.60 m){{convert|2|ft|3|in|cm}}
→ 2 feet 3 inches (69 cm){{convert|1|lb|5|oz|g}}
→ 1 pound 5 ounces (600 g)
In output
Available multiple-unit output options predefined, like ftin
and ydftin
. The full list is at § Output multiples.
{{convert|2|m|ftin}}
→ 2 metres (6 ft 7 in){{convert|2|m|ft in}}
→ 2 metres (6.6 ft; 79 in), using a space, returns the decimal point
Default behavior, for comparison:
{{convert|2|m}}
→ 2 metres (6 ft 7 in)
See also:
Currency per unit: $/mi → $/km
Using currency symbols in a $ per unit value, you can convert the per-unit:
{{convert|3.39|$/USgal|$/L}}
→ $3.39 per US gallon ($0.90/L){{convert|10000|€/ha|€/acre}}
→ €10,000 per hectare (€4,000/acre){{convert|10|¢/mi|¢/km}}
→ 10 cents per mile (6.2 ¢/km){{convert|1500|¥/lb|¥/kg}}
→ ¥1,500 per pound (¥3,300/kg)
You can also set the currency in both values using |$=€
:
{{convert|10|$/mi|$/km|$=€}}
→ €10 per mile (€6.2/km)
It is not possible to convert the currency:
{{convert|10|$/lb|€/kg}}
→ $10 per pound ([convert: unit mismatch])
So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km)
Using convert inside templates
For usage in template code, like infoboxes, {{Convert}} has these options:
- Pre-formatting fraction input
- Module:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input. Note this function does not have the full capabilities of the Convert template; it only converts fractions (and horse race distances)
- Your template can accept
|input=16 7/8
and use {{#invoke:Convert/helper|number|16 7/8}} → 16+7/8
- Using a Wikidata property
- Adding the Wikidata property code, like code
|input=P2073
, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.
Note: to return that property value for an other article, use |qid=
.
Example for vehicle range (P2073) of Cessna 208 Caravan (Q1056131):
{{convert|input=P2073|qid={{get QID|Cessna 208 Caravan}}|ftin|abbr=on}}
→ 1,500 mi (7,920,000 ft 0 in){{convert|input=P2073|qid=Q1056131|km|abbr=on}}
→ 1,500 mi (2,400 km){{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}}
→ 2,400 km
- For example see template:Infobox Telescope.
Sometimes a property may have more than one value against it in Wikidata. You can use the |qual=
parameter to specify which of the values you want to use.
Example for diameter (P2386):
Note: this example uses |qid=Q1513315
(testing for South Pole Telescope (Q1513315))
- primary mirror (Q613628):
{{convert|input=P2386|qual=Q613628|ft|abbr=on}}
→ 10.0 m (32.8 ft) - secondary mirror (Q1395645):
{{convert|input=P2386|qual=Q1395645|ft|abbr=on}}
→ 1 m (3.3 ft)
Parameter list
Parameter | Value | Description | Note |
---|---|---|---|
|abbr=in |
in
|
Use symbol for first (left-hand side) unit | Unit display |
|abbr=off |
off
|
Use name for all units | Unit display |
|abbr=none |
none
| ||
|abbr=on |
on
|
Use symbol for all units (default for {{cvt}} )
|
Unit display |
|abbr=out |
out
|
Use symbol for right-hand side unit (default) | Unit display |
|abbr=unit |
unit
|
Use symbol for all units when using scientific notation | Unit display |
|abbr=values |
values
|
Omit both the input and output units: show only the numbers | Unit display |
|abbr=~ |
~
|
Shows both unit name and symbol | Unit display |
|adj=mid|… |
mid
|
User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.
|
Word adding, adjective |
|adj=on |
on
|
Unit name is adjective (singular and hyphenated) | Grammar, adjective |
|adj=pre|… |
pre
|
User-specified text before input unit. Expects 1 unnamed parameter. | Word adding |
|adj=ri0 |
ri0
|
Round input with precision 0 | Input precision |
|adj=ri1 |
ri1
|
Round input with precision 1 | Input precision |
|adj=ri2 |
ri2
|
Round input with precision 2 | Input precision |
|adj=ri3 |
ri3
|
Round input with precision 3 | Input precision |
|comma=5 |
5
|
Only use comma for thousands separator if 5 or more digits | Number format |
|comma=gaps |
gaps
|
Use gaps (space), not comma, for thousands separator | Number format |
|comma=off |
off
|
No thousands separator | Number format |
|disp=b |
b
|
Join input and output using " (...)" (default) | Join values |
|disp=sqbr |
sqbr
|
Join input and output using " [...]" | Join values |
|disp=br |
br
|
Join input and output using "<br/>" | Join values |
|disp=comma |
comma
|
Join input and output using ", " | Join values |
|disp=or |
or
|
Join input and output using " or " | Join values |
|disp=number |
number
|
Display output number only | Parts only |
|disp=output number only |
output number only
| ||
|disp=out |
out
|
Display only output number and name/symbol | Parts only |
|disp=output only |
output only
| ||
|disp=preunit|…[|…] |
preunit
|
Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters. | Word adding |
|disp=table |
table
|
Output is suitable for a table cell with align="right" | Table columns |
|disp=tablecen |
tablecen
|
Output is suitable for a table cell with align="center" | Table columns |
|disp=unit |
unit
|
Display input name/symbol only (not input number, not output) | Parts only |
|disp=unit2 |
unit2
|
Display output name/symbol only (not input; not output number) | Parts only |
|disp=x|… |
x
|
Join input and output using user-specified text | Word adding |
|frac=N |
N
|
Show imperial number in fractions, denominator=N | Number format, fraction |
|input=P2048 |
P2048 (e.g.)
|
Reads and converts Wikidata property | Inside template |
|lk=in |
in
|
Link left-hand side unit name or symbol | Unit link |
|lk=on |
on
|
Link all unit names or symbols (but not twice for the same unit) | Unit link |
|lk=out |
out
|
Link right-hand side unit name or symbol | Unit link |
|order=flip |
flip
|
Inverts order of input, output measurements (conversion first) | Order |
|order=out |
out
|
Displays output units in the order entered, skipping input unit | Order |
|qid=Q1056131 |
Q1056131 (e.g.)
|
Reads Wikidata property from Wikidata item | Inside template; testing |
|qual=Q613628 |
Q613628 (e.g.)
|
Qualify Wikidata property | |
|round=5 |
5
|
Rounds calculation to the nearest multiple of 5 | Output precision |
|round=25 |
25
|
Rounds calculation to the nearest multiple of 25 | Output precision |
|round=each |
each
|
In a range, each number is rounded by the default rounding | Output precision |
|sigfig=N |
N
|
Round output number to N significant figures (N is a positive integer) | Output precision |
|sortable=on |
on
|
Adds invisible sort key | Table sort |
|sp=us |
us
|
Use U.S. spelling ("meter" instead of default "metre") | Spelling U.S. names |
|spell=in |
in
|
Spell input number in words | Spelling numbers |
|spell=In |
In
|
Spell input number in words with first letter uppercase | Spelling numbers |
|spell=on |
on
|
Spell input and output numbers in words | Spelling numbers |
|spell=On |
On
|
Spell input and output numbers in words with first letter uppercase | Spelling numbers |
|$=€ |
€
|
Replace $-sign with a currency sign, for example in €/hectare
|
Cost per unit No currency conversion happens |
|debug=yes |
yes
|
Debugging only. In a sortable table: show the normally hidden sort key | Table sort |
|disp=flip |
flip
|
Deprecated. Use |order=flip | Order |
|sing= |
Deprecated. Use |adj= | Plurals |
Deprecated options
Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.
- disp=flip is deprecated. Use order=flip instead
- sing= is deprecated in any situation. Use adj= instead
- Range separator |xx| is deprecated (not MOS compliant). Use |x| instead
- Range separator |*| is deprecated (not MOS compliant). Use |x| instead
TemplateData
TemplateData for Convert
Converts measurements to other units.
Parameter | Description | Type | Status | |
---|---|---|---|---|
Value | 1 | The value to convert. | Number | required |
From unit | 2 | The unit for the provided value.
| String | required |
To units | 3 | The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space.
| String | suggested |
Precision or suffix | 4 | Significant digits after decimal dot or, if negative, exponent of ten. | Number | optional |
Link units | lk | Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. For more fine-grained control over which units to link, use the template multiple times.
| String | optional |
Abbreviation | abbr | Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units).
| String | suggested |
Spelling | sp | Spelling of units. Use “us” to display unit names using U.S. spelling.
| String | optional |
Adjective | adj | Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form.
| Unbalanced wikitext | optional |
Conversion | disp | Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision.
| String | optional |
Ordering | order | “flip” returns converted value first, input value second.
| String | optional |
Significant figures | sigfig | Indicates the number of significant figures to be used in rounding. | Number | optional |
Rounding output | round | The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range. | Number | optional |
Thousands separator | comma | Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345').
| Boolean | optional |
Sort key | sortable | “on” generates a hidden sort key
| Boolean | optional |
Spell numbers? | spell | If used, spells input or input and output numbers in words, optionally capitalizing the first
| String | optional |
Singular? | sing | If 'yes', uses singular form of units (deprecated)
| Boolean | deprecated |
Fraction? | frac | fraction as rounding unit | Number | optional |
Currency symbol | $ | sets currency symbol in both units
| String | optional |
Mach altitude (ft) | altitude_ft | Mach (speed) depends on altitide
| Number | optional |
Mach altitude (m) | altitude_m | Mach (speed) depends on altitude | Number | optional |
WD property | input | Reads the property value of the item (article), then converts it
| String | optional |