Jump to content

Computer case screws: Difference between revisions

From Wikipedia, the free encyclopedia
Content deleted Content added
N3362 (talk | contribs)
No edit summary
details are already in body, no need to cram them into the caption
 
(29 intermediate revisions by 13 users not shown)
Line 1: Line 1:
{{Short description|Hardware used to secure parts of a PC to the case}}
{{Refimprove|date=September 2007}}
{{Refimprove|date=September 2007}}
[[File:PC Screws.jpg|thumb|From left to right: a #6-32 UNC thumbscrew, a #6-32 UNC screw, an M3 screw and a [[self-tapping screw|self-tapping]] screw for [[computer fan|case fans]]]]
[[File:PC Screws.jpg|thumb|From left to right: a #6-32 UNC thumbscrew, a #6-32 UNC screw, an M3 screw and a [[self-tapping screw|self-tapping]] screw for [[computer fan|case fans]]]]
Line 6: Line 7:
The #6-32 UNC screws are often found on 3.5" [[hard disk drive]]s and the case's body to secure the covers. The M3 threaded holes are often found on 5.25" [[optical disc drives]], 3.5" [[floppy drives]], and 2.5" drives. [[Motherboards]] and other circuit boards often use a #6-32 UNC standoff. #4-40 UNC thumb screws are often found on the ends of [[Digital Visual Interface|DVI]], [[VGA connector|VGA]], [[Serial port|serial]] and [[Parallel port|parallel]] connectors.
The #6-32 UNC screws are often found on 3.5" [[hard disk drive]]s and the case's body to secure the covers. The M3 threaded holes are often found on 5.25" [[optical disc drives]], 3.5" [[floppy drives]], and 2.5" drives. [[Motherboards]] and other circuit boards often use a #6-32 UNC standoff. #4-40 UNC thumb screws are often found on the ends of [[Digital Visual Interface|DVI]], [[VGA connector|VGA]], [[Serial port|serial]] and [[Parallel port|parallel]] connectors.


More modern cases from certain manufacturers ([[Dell]], [[Gateway, Inc.|Gateway]]) and enthusiast cases will lack screws altogether, instead utilizing a tool-less design.
More modern cases from certain manufacturers ([[Dell]], [[Gateway, Inc.|Gateway]]) and enthusiast cases will lack screws altogether, instead utilizing a toolless design.


== #6-32 UNC screw ==
== #6-32 UNC screw ==
[[File:6-32 computer screw with hexagonal head and Phillips drive.png|thumb|The #6-32 UNC screw has a thread pitch of {{nowrap|1/32 in}} ({{Convert|0.031250|in|mm}}).]]
[[File:6-32 computer screw with hexagonal head and Phillips drive.png|thumb|The #6-32 UNC screw has a thread pitch of {{nowrap|1/32 in}} ({{Convert|0.031250|in|mm}}).]]


The #6-32 UNC is a [[Unified Thread Standard|UTS screw]] specifying a major thread diameter of {{nowrap|#6}} which is defined as {{Convert|0.1380|in|mm}}; and {{nowrap|32 tpi}} (threads per inch) which equates to a thread pitch of {{Convert|0.031250|in|mm}}. The optional UNC specification indicates the standard coarse thread is used which is defined for #6 screws as 32 tpi rendering 'UNC' redundant, however it may be seen when other specifications such as plating or other treatments are also specified. It is by far the most common screw found inside computer cases.<ref name="dansdata">Rutter, Daniel ''[http://www.dansdata.com/danletters053.htm Dan's Data - Letters 53], "Screwed"'', 2006-02-26</ref> It commonly appears in lengths of {{nowrap|3/16 in}} ({{Convert|0.1875|in|mm}}) and {{nowrap|1/4 in}} ({{Convert|0.25|in|mm}}) or less often {{nowrap|5/16 in}} ({{Convert|0.3125|in|mm}}). Non-standard metricized lengths such as {{Convert|5|mm|in}} are also sometimes encountered. Nearly every brand new computer case comes with a bag of these. They are commonly used for the following purposes, however there are many exceptions:
The #6-32 UNC is a [[Unified Thread Standard|UTS screw]] specifying a major thread diameter of {{nowrap|#6}} which is defined as {{Convert|0.1380|in|mm}}; and {{nowrap|32 tpi}} (threads per inch) which equates to a thread pitch of {{Convert|0.031250|in|mm}}. The optional UNC specification indicates the standard coarse thread is used which is defined for #6 screws as 32 tpi rendering 'UNC' redundant, however it may be seen when other specifications such as plating or other treatments are also specified. It is by far the most common screw found inside computer cases.<ref name="dansdata">Rutter, Daniel ''[http://www.dansdata.com/danletters053.htm Dan's Data - Letters 53], "Screwed"'', 2006-02-26</ref>{{Self-published inline|date=January 2022}} It commonly appears in lengths of {{nowrap|3/16 in}} ({{Convert|0.1875|in|mm}}) and {{nowrap|1/4 in}} ({{Convert|0.25|in|mm}}) or less often {{nowrap|5/16 in}} ({{Convert|0.3125|in|mm}}). Non-standard metricized lengths such as {{Convert|5|mm|in}} are also sometimes encountered. Nearly every brand new computer case comes with a bag of these. They are commonly used for the following purposes, however there are many exceptions:
* securing a power supply to the case
* securing a power supply to the case
* securing a 3.5-inch hard disk drive to the case
* securing a 3.5-inch hard disk drive to the case
Line 18: Line 19:
* usually, one or more #6-32 UNC screws hold the main cover on the case
* usually, one or more #6-32 UNC screws hold the main cover on the case


They are almost always provided with a #2 [[List of screw drives#Phillips|Phillips]] drive. Sometimes a [[Torx]] drive is used instead. Both Phillips and Torx patterns may also be combined with a slot for a flat-blade screwdriver. Usually they are provided with a 1/4 in ({{Convert|0.25|in|mm}}) flanged hex head. Non-standard metricized {{Convert|5.5|mm|in}} flanged hex heads can also be encountered. Also common are ''pan head'' screws - a low disk with a [[chamfer]]ed outer edge. Because they are used in places where high torque is not required and easy removal and replacement may be desirable (such as on the side panels of the PC case), they are frequently available as [[thumbscrew (fastener)|thumbscrews]] with larger, knurled heads that can be removed with one's fingers or tools.
They are almost always provided with a #2 [[List of screw drives#Phillips|Phillips]] drive. Sometimes a Green [[List of screw drives#Robertson|Robertson]] or [[Torx]] drive is used instead. All three patterns may also be combined with a slot for a flat-blade screwdriver. Usually they are provided with a 1/4 in ({{Convert|0.25|in|mm}}) flanged hex head. Non-standard metricized {{Convert|5.5|mm|in}} flanged hex heads can also be encountered. Also common are ''pan head'' screws - a low disk with a [[chamfer]]ed outer edge. Because they are used in places where high torque is not required and easy removal and replacement may be desirable (such as on the side panels of the PC case), they are frequently available as [[thumbscrew (fastener)|thumbscrews]] with larger, knurled heads that can be removed with one's fingers or tools.


== M3 screw ==
== M3 screw ==
[[File:M3 screw and 6-32 UTS screw with ruler thread pitch.png|thumb|The M3 screw (bottom) has a thread pitch of {{Convert|0.5|mm|in}}, which is finer than the {{Convert|0.031250|in|mm}} pitch of a #6-32 UNC screw (top).]]
[[File:M3 screw and 6-32 UTS screw with ruler thread pitch.png|thumb|upright|The bottom M3 screw has a finer pitch than the top #6-32 UNC screw.]]


The M3 is a [[ISO metric screw thread|metric screw]] specifying a nominal diameter of {{Convert|3|mm|in}}; and standard coarse thread pitch defined as {{Convert|0.5|mm|in}}. The M3 is the second most common screw found in PCs.<ref name="dansdata"/> It commonly appears in many lengths from 1 to 20 mm. Nearly every brand-new computer case comes with a bag of these. Notwithstanding many exceptions, they are commonly used for securing the following devices:<ref>{{cite web
The M3 is a [[ISO metric screw thread|metric screw]] specifying a nominal diameter of {{Convert|3|mm|in}}; and standard coarse thread pitch defined as {{Convert|0.5|mm|in}}. The M3 is the second most common screw found in PCs.<ref name="dansdata"/>{{Self-published inline|date=January 2022}} It commonly appears in many lengths from 1 to 20 mm. Nearly every brand-new computer case comes with a bag of these. Notwithstanding many exceptions, they are commonly used for securing the following devices:<ref>{{cite web
| url = http://www.hgst.com/tech/techlib.nsf/techdocs/E742570490EBF0C286256C520066E5A4/$file/dk23xx_ig.pdf
| url = http://www.hgst.com/tech/techlib.nsf/techdocs/E742570490EBF0C286256C520066E5A4/$file/dk23xx_ig.pdf
| archiveurl = https://web.archive.org/web/20121224112513/http://www.hgst.com/tech/techlib.nsf/techdocs/E742570490EBF0C286256C520066E5A4/%24file/dk23xx_ig.pdf
| archiveurl = https://web.archive.org/web/20121224112513/http://www.hgst.com/tech/techlib.nsf/techdocs/E742570490EBF0C286256C520066E5A4/%24file/dk23xx_ig.pdf
Line 31: Line 32:
| archivedate = December 24, 2012
| archivedate = December 24, 2012
| publisher = [[HGST]]
| publisher = [[HGST]]
| format = PDF
| url-status = dead
| url-status = dead
}}</ref><ref>{{Cite web |last=admin |date=2022-03-11 |title=Which screws do I use to install the motherboard onto the standoffs? |url=https://gamingpeach.com/which-screws-do-i-use-to-install-the-motherboard-onto-the-standoffs/ |access-date=2022-03-22 |language=en-US}}</ref>
}}</ref>{{verification failed|date=October 2018}}
* 5.25-inch [[optical disc drive]]s
* 5.25-inch [[optical disc drive]]s
* 2.5-inch hard disks and [[solid-state drive]]
* 2.5-inch hard disks and [[solid-state drive]]
Line 41: Line 41:


== Motherboard standoff ==
== Motherboard standoff ==
[[File:Toennchen IMGP5029 wp.jpg|thumb|Various types of motherboard standoffs]]
[[File:Toennchen IMGP5029 wp.jpg|thumb|left|upright=1.35|Various types of motherboard standoffs]]


Most cases use threaded brass standoffs (Jack Screw Standoffs) for attaching the motherboard to the case chassis. Because the case material is usually a conductive metal, attaching the motherboard directly to it can cause a [[short circuit]]. Sometimes threaded or snap-lock plastic standoffs are used, which are less secure, but equally useful in a stationary computer. The standoff provides a margin of space between the motherboard and the case to keep the multiple solder points below from grounding and short-circuiting.
Most cases use threaded brass standoffs (Jack Screw Standoffs) for attaching the motherboard to the case chassis. Because the case material is usually a conductive metal, attaching the motherboard directly to it can cause a [[short circuit]]. Sometimes threaded or snap-lock plastic standoffs are used, which are less secure, but equally useful in a stationary computer. The standoff provides a margin of space between the motherboard and the case to keep the multiple solder points below from grounding and short-circuiting.
Line 55: Line 55:
| accessdate = 2014-12-22
| accessdate = 2014-12-22
| website = formfactors.org
| website = formfactors.org
| format = PDF
| page = 18
| page = 18
| archive-url = https://web.archive.org/web/20160817033942/http://www.formfactors.org/developer/specs/atx2_1.pdf
| archive-url = https://web.archive.org/web/20160817033942/http://www.formfactors.org/developer/specs/atx2_1.pdf
Line 62: Line 61:
}}</ref>
}}</ref>


== #4-40 UNC thumbscrews ==
== {{anchor|4-40 jackscrews|#4-40 UNC thumbscrews}}#4-40 UNC jackscrews ==
Pairs of #4-40 UNC thumbscrews are used to fasten certain [[Electrical connector|connectors]] to [[Computer port (hardware)|hardware port]]s. The screws are typically located on either side of [[D-subminiature]] connectors such as on VGA, serial, parallel and [[Legacy system|legacy]] [[Game port|game controller ports]]. They are also more recently used on DVI connectors. The typical length for a #4-40 screw used in PCs is {{nowrap|3/16 in}} ({{Convert|0.1875|in|mm}}). Occasionally the 4-40 hexagonal standoffs come loose when loosening the 4-40 screws to remove a cable, gender changer, or adapter. The 4-40 standoffs typically tighten with a 5 mm or 3/16-inch socket. Care should be taken not to overtighten them as they are somewhat delicate and will snap off at the base with excessive torque.
Pairs of #4-40 UNC jackscrews are used to fasten certain [[Electrical connector|connectors]] to [[Computer port (hardware)|hardware port]]s. These fasteners are typically located on either side of [[D-subminiature]] connectors, such as on VGA, DVI, serial, parallel and [[Legacy system|legacy]] [[Game port|game controller ports]]. The derivation of the customary term "jackscrew" in this context is unclear. The screws are typically thumbscrews, but may be slotted or [[Phillips drive]], especially where permanent attachment is expected, or where the heads need to be lower-profile to save space.

=== Jackposts ===
[[File:9 pin d-sub connector male closeup.jpg|thumb|A male DE-9 connector showing hex jackposts on either side of the D-shell. Note the limited clearance.]]
Typically #4-40 UNC standoffs are used, which present the same #4-40 type female threading at their bolt end that they also screw into with their male end. These standoffs may also be called jackposts. They are similar but generally not identical to motherboard standoffs. The bolt end is typically hex-shaped, but may exceptionally be round to make removal more difficult. The hex diameter is 3/16", or 4.7mm. A 5mm hex socket might still fit, however where tightening or removal is required, care needs to be taken to select a [[nut driver]] with a sufficiently small ''outer'' diameter, as clearance between the jackpost and subminiature connector D-shell is limited. (A 9mm outer diameter should still fit, but 3/8" might already be marginally too big, depending on [[manufacturing tolerance]]s.)
The typical threading depth for #4-40 UNC jackposts used in PCs is 3/16" ({{Convert|0.1875|in|mm|disp=or}}); the jackscrews that go into them are typically somewhat longer. The length of hexagonal jackpost heads can vary slightly, though pairs should be identical. Generally the D-shell stands somewhat proud of these hex bolts.
Occasionally the #4-40 hexagonal standoffs come loose when loosening the #4-40 screws to remove a cable, gender changer, or adapter. Care should however be taken not to overtighten standoffs as they are somewhat delicate and will snap off at the base with excessive torque.


==Material==
==Material==
Line 81: Line 86:


== Example ==
== Example ==
A regular computer case may require/include<ref>{{cite web |title=H440 Manual |publisher=[[Nzxt]] |url=https://sta3-nzxtcorporation.netdna-ssl.com/uploads/download/attachment/243/H-440-manual-multi-language.pdf |accessdate=2017-02-07}}</ref>
A regular computer case may require/include<ref>{{cite web |title=H500 Manual |publisher=[[NZXT]]|url=https://nzxt-site-media.s3-us-west-2.amazonaws.com/uploads/download/attachment/722/H500i_H500-manual-ver5-021119_-web.pdf |access-date=17 June 2021}}</ref>
* 9 thumb screw 6-32 × 6 mm for 2.5” drive tray, expansion slots
* 7 thumb screw 6-32 × 6 mm for 2.5” drive tray, expansion slots
* 18 special thumb screw unknown size for side panel, 3.5” drive tray, psu bracket
* 4 hexagon screw 6-32 × 6 mm for psu
* 0 hexagon screw 6-32 × 6 mm for psu
* 21 phillips screw 6-32 × 5 mm for motherboard, 3.5” harddisk tray
* 34 phillips screw 6-32 × 5 mm for motherboard, 3.5” harddisk tray
* 12 phillips screw M3 × 5 mm for 2.5” harddrive
* 0 phillips screw M3 × 5 mm for 2.5” harddrive
* 16 KB5 x 10 mm for fans
* 16 screw kb5 × 10 mm for fan
* 9 standoff 6-32 × 6.5 + 4 mm for motherboard
* 8 standoff 6-32 × 6.5 + 4 mm for motherboard
* 1 positioning standoff 6-32 × 6.5 + 4 mm for motherboard
* 1 positioning standoff 6-32 × 6.5 + 4 mm for motherboard

== See also ==
* [[Torx]]


== References ==
== References ==
Line 95: Line 102:


== External links ==
== External links ==
* McDonough, Andy ''[http://www.crn.com/recipes/security/199601920/the-11-tools-every-system-builder-should-own.htm The 11 Tools Every System Builder Should Own]'' retrieved Nov 2, 2014 from crn.com
* ''[http://www.crn.com/recipes/security/199601920/the-11-tools-every-system-builder-should-own.htm The 11 Tools Every System Builder Should Own]'' (and screws) from crn.com
* Torres, Gabriel ''[http://www.hardwaresecrets.com/everything-you-need-to-know-about-the-screws-used-on-the-pc/ Everything You Need To Know About The Screws Used on The PC]'' retrieved Jun 20, 2016 from hardwaresecrets.com


[[Category:Computer enclosure]]
[[Category:Computer enclosure]]

Latest revision as of 20:36, 26 October 2024

From left to right: a #6-32 UNC thumbscrew, a #6-32 UNC screw, an M3 screw and a self-tapping screw for case fans

Computer case screws are the hardware used to secure parts of a PC to the case. Although there are numerous manufacturers of computer cases, they have generally used three thread sizes. The Unified Thread Standard (UTS) originates from the United States, while the ISO metric screw thread is standardized worldwide. In turn, these thread standards define preferred size combinations that are based on generic units—some on the inch and others on the millimetre.

The #6-32 UNC screws are often found on 3.5" hard disk drives and the case's body to secure the covers. The M3 threaded holes are often found on 5.25" optical disc drives, 3.5" floppy drives, and 2.5" drives. Motherboards and other circuit boards often use a #6-32 UNC standoff. #4-40 UNC thumb screws are often found on the ends of DVI, VGA, serial and parallel connectors.

More modern cases from certain manufacturers (Dell, Gateway) and enthusiast cases will lack screws altogether, instead utilizing a toolless design.

#6-32 UNC screw

[edit]
The #6-32 UNC screw has a thread pitch of 1/32 in (0.031250 inches (0.7938 mm)).

The #6-32 UNC is a UTS screw specifying a major thread diameter of #6 which is defined as 0.1380 inches (3.51 mm); and 32 tpi (threads per inch) which equates to a thread pitch of 0.031250 inches (0.7938 mm). The optional UNC specification indicates the standard coarse thread is used which is defined for #6 screws as 32 tpi rendering 'UNC' redundant, however it may be seen when other specifications such as plating or other treatments are also specified. It is by far the most common screw found inside computer cases.[1][self-published source?] It commonly appears in lengths of 3/16 in (0.1875 inches (4.76 mm)) and 1/4 in (0.25 inches (6.4 mm)) or less often 5/16 in (0.3125 inches (7.94 mm)). Non-standard metricized lengths such as 5 millimetres (0.20 in) are also sometimes encountered. Nearly every brand new computer case comes with a bag of these. They are commonly used for the following purposes, however there are many exceptions:

  • securing a power supply to the case
  • securing a 3.5-inch hard disk drive to the case
  • holding an expansion card in place by its metal slot cover
  • fastening case components to one another
  • usually, one or more #6-32 UNC screws hold the main cover on the case

They are almost always provided with a #2 Phillips drive. Sometimes a Green Robertson or Torx drive is used instead. All three patterns may also be combined with a slot for a flat-blade screwdriver. Usually they are provided with a 1/4 in (0.25 inches (6.4 mm)) flanged hex head. Non-standard metricized 5.5 millimetres (0.22 in) flanged hex heads can also be encountered. Also common are pan head screws - a low disk with a chamfered outer edge. Because they are used in places where high torque is not required and easy removal and replacement may be desirable (such as on the side panels of the PC case), they are frequently available as thumbscrews with larger, knurled heads that can be removed with one's fingers or tools.

M3 screw

[edit]
The bottom M3 screw has a finer pitch than the top #6-32 UNC screw.

The M3 is a metric screw specifying a nominal diameter of 3 millimetres (0.12 in); and standard coarse thread pitch defined as 0.5 millimetres (0.020 in). The M3 is the second most common screw found in PCs.[1][self-published source?] It commonly appears in many lengths from 1 to 20 mm. Nearly every brand-new computer case comes with a bag of these. Notwithstanding many exceptions, they are commonly used for securing the following devices:[2][3]

M3 screws typically accept a #2 Phillips screwdriver tip.

Motherboard standoff

[edit]
Various types of motherboard standoffs

Most cases use threaded brass standoffs (Jack Screw Standoffs) for attaching the motherboard to the case chassis. Because the case material is usually a conductive metal, attaching the motherboard directly to it can cause a short circuit. Sometimes threaded or snap-lock plastic standoffs are used, which are less secure, but equally useful in a stationary computer. The standoff provides a margin of space between the motherboard and the case to keep the multiple solder points below from grounding and short-circuiting.

Usually, the standoff has a #6-32 UNC male thread on one end which screws into a threaded hole in the case or motherboard backplate and a #6-32 UNC female thread in the other end which accepts a screw to retain the motherboard. Less often, the standoff has a female thread in both ends and a second screw is used to attach it to the case. Some standoffs use the M3 female thread (which faces the motherboard) instead of #6-32 UNC, and on a rare occasion a mixture of types can be used in the same case.

All-metric standoffs are stated as threading x hex length x threaded length. For example, M3 x 10 x 6 means a standoff with M3 male and female threading, 10 mm hex length, and 6 mm threaded length. M6 x 10 x 8 means M6 male and female threading, 10 mm hex length, and 8 mm threaded length. Typically, M2.5 and M3 standoffs tighten with a 5 mm socket, M4 standoffs with a 6 mm socket, M5 standoffs with a 7 mm socket, and M6 standoffs with an 8 mm socket, but this is not always the case.

Version 2.1 of the ATX specification states that the length of standoffs needs to be at least 0.25 inches (6.4 mm), with their cross sections fitting within 0.40 by 0.40 inches (10 mm × 10 mm) square areas centered around each mounting hole on ATX motherboards.[4]

#4-40 UNC jackscrews

[edit]

Pairs of #4-40 UNC jackscrews are used to fasten certain connectors to hardware ports. These fasteners are typically located on either side of D-subminiature connectors, such as on VGA, DVI, serial, parallel and legacy game controller ports. The derivation of the customary term "jackscrew" in this context is unclear. The screws are typically thumbscrews, but may be slotted or Phillips drive, especially where permanent attachment is expected, or where the heads need to be lower-profile to save space.

Jackposts

[edit]
A male DE-9 connector showing hex jackposts on either side of the D-shell. Note the limited clearance.

Typically #4-40 UNC standoffs are used, which present the same #4-40 type female threading at their bolt end that they also screw into with their male end. These standoffs may also be called jackposts. They are similar but generally not identical to motherboard standoffs. The bolt end is typically hex-shaped, but may exceptionally be round to make removal more difficult. The hex diameter is 3/16", or 4.7mm. A 5mm hex socket might still fit, however where tightening or removal is required, care needs to be taken to select a nut driver with a sufficiently small outer diameter, as clearance between the jackpost and subminiature connector D-shell is limited. (A 9mm outer diameter should still fit, but 3/8" might already be marginally too big, depending on manufacturing tolerances.) The typical threading depth for #4-40 UNC jackposts used in PCs is 3/16" (0.1875 inches or 4.76 millimetres); the jackscrews that go into them are typically somewhat longer. The length of hexagonal jackpost heads can vary slightly, though pairs should be identical. Generally the D-shell stands somewhat proud of these hex bolts. Occasionally the #4-40 hexagonal standoffs come loose when loosening the #4-40 screws to remove a cable, gender changer, or adapter. Care should however be taken not to overtighten standoffs as they are somewhat delicate and will snap off at the base with excessive torque.

Material

[edit]

Steel is by far the most common material used, frequently with a plated or anodized finish. Other materials including brass, aluminum, nylon and various plastics are also used for applications with particular physical or aesthetic requirements.

Comparison

[edit]

The #6-32 UNC is a thicker screw with a more coarse thread. This makes it more suitable for fastening larger parts and thicker materials requiring increased holding strength. Its larger size and coarse thread make it easier to work with during assembly, with less risk of cross threading. The integrated flange provides greater holding strength with less risk of pull through. The hex head makes it easier to work with during assembly with powered torque screwdrivers.

The M3 is a thinner screw with a finer thread than the #6-32 UNC. This makes it more suitable for fastening into smaller parts and thinner materials requiring good strength in a limited space. Its size and fine thread make it appropriate for applications where a #6-32 UNC would be excessively bulky without providing any other benefits versus the smaller M3.

[edit]

Example

[edit]

A regular computer case may require/include[5]

  • 7 thumb screw 6-32 × 6 mm for 2.5” drive tray, expansion slots
  • 4 hexagon screw 6-32 × 6 mm for psu
  • 21 phillips screw 6-32 × 5 mm for motherboard, 3.5” harddisk tray
  • 12 phillips screw M3 × 5 mm for 2.5” harddrive
  • 16 KB5 x 10 mm for fans
  • 9 standoff 6-32 × 6.5 + 4 mm for motherboard
  • 1 positioning standoff 6-32 × 6.5 + 4 mm for motherboard

See also

[edit]

References

[edit]
  1. ^ a b Rutter, Daniel Dan's Data - Letters 53, "Screwed", 2006-02-26
  2. ^ "2.5-inch Hard Disk Drives Installation Guide" (PDF). HGST. January 30, 2007. Archived from the original (PDF) on December 24, 2012. Retrieved November 16, 2014.
  3. ^ admin (2022-03-11). "Which screws do I use to install the motherboard onto the standoffs?". Retrieved 2022-03-22.
  4. ^ "ATX Specification, Version 2.1: Section 3.4.2 Secondary (Bottom/Solder) Side Height Constraints" (PDF). formfactors.org. 2012-08-18. p. 18. Archived from the original (PDF) on 2016-08-17. Retrieved 2014-12-22.
  5. ^ "H500 Manual" (PDF). NZXT. Retrieved 17 June 2021.
[edit]