Phenylsodium

(Redirected from Phenyl sodium)

Phenylsodium C6H5Na is an organosodium compound. Solid phenylsodium was first isolated by Nef in 1903. Although the behavior of phenylsodium and phenyl magnesium bromide are similar, the organosodium compound is very rarely used.[2]

Phenylsodium
Names
IUPAC name
Sodium benzenide
Other names
Sodium benzenide, Sodium phenyl, sodiobenzene
Identifiers
3D model (JSmol)
Abbreviations NaPh, PhNa
ChemSpider
UNII
  • InChI=1S/C6H5.Na/c1-2-4-6-5-3-1;/h1-5H;/q-1;+1
    Key: KSMWLICLECSXMI-UHFFFAOYSA-N
  • [Na]C1=CC=CC=C1
Properties
C6H5Na
Molar mass 100.096 g·mol−1
Appearance Yellowish-white powder[1]
Reacts
Solubility Insoluble in hydrocarbons, reacts with ether
Hazards
Occupational safety and health (OHS/OSH):
Main hazards
Corrosive, pyrophoric in air
Related compounds
Related compounds
Phenyllithium, Phenylcopper, Phenylcobalt
Except where otherwise noted, data are given for materials in their standard state (at 25 °C [77 °F], 100 kPa).

Synthesis

edit

The existence of phenylsodium was originally proposed by August Kekulé after observing the formation of sodium benzoate in the reaction of bromobenzene with sodium under carbon dioxide.

Transmetalation

edit

In the original synthesis, diphenylmercury and sodium was shown to yield a suspension of phenylsodium:

(C6H5)2Hg + 3 Na → 2 C6H5Na + NaHg

The Shorigen reaction is also used in the generation of phenylsodium, where an alkyl sodium compound is treated with benzene:[3]

RNa + C6H6 → RH + C6H5Na

The method can also result in the addition of a second sodium. This dimetallation occurs in the meta and para positions. The use of certain alkyl sodium compounds such as n-amyl sodium is known to greatly increase this dimetallation effect.[4]

Metal-halogen exchange

edit

A common route to phenylsodium utilizes powdered sodium with bromobenzene:

C6H5Br + 2 Na → C6H5Na + NaBr

The yield of this method is lowered by the formation of diphenyl due to phenylsodium reacting with aryl halide starting material[5]

Lithium exchange

edit

A more modern synthesis involves the reaction of phenyllithium and NaOtBu:[6]

C6H5Li + NaOtBu → C6H5Na + LiOtBu

Properties and structure

edit
 
Structure of the phenylsodium-PMDTA adduct, hydrogen atoms omitted for clarity.

The first syntheses of phenylsodium which employed the organomercury route seemed to yield a light brown powder.[7] It was discovered by Wilhelm Schlenk that this product was contaminated by sodium amalgam. Centrifugation allowed for the isolation of pure phenylsodium which appears as a yellowish-white amorphous powder which readily bursts into flames.[1]

Like phenyllithium, adducts of the compound with PMDTA have been crystallized. While phenyllithium forms a monomeric adduct with PMDTA, phenylsodium exists as a dimer, reflecting the larger radius of sodium.[6]

Complexes of phenylsodium and magnesium alkoxides, especially magnesium 2-ethoxyethoxide Mg(OCH2CH2OEt)2, are soluble in benzene. The complex is formed by the reaction:

NaPh + Mg(OCH2CH2OEt)2 → Na2MgPh2(OCH2CH2OEt)2

Although the phenylsodium is complexed, it maintains its phenylation and metalation ability. Additionally, the complex is highly stable in benzene retaining its reactivity after a month of storage.[8]

Phenyllithium can also be used to modify the properties of phenylsodium. Ordinarily, phenylsodium reacts violently with diethyl ether, but Georg Wittig showed that by synthesizing PhNa with PhLi in ether, the complex (C6H5Li)(C6H5Na)n was formed. The phenylsodium component of the complex reacts before the phenyllithium, making it an effective compound to stabilize the highly reactive sodium compound. This complex could be isolated as solid crystals which were soluble in ether and remained stable in solution at room temperature for several days. Phenyllithium is able to stabilize phenylsodium in a ratio as high as 1:24 Li:Na, although this produces an insoluble mass which could be still used for reactions.[2]

Reactions

edit

Reactions involving phenylsodium were employed as early as the mid 19th century, although before 1903. Typically phenylsodium is prepared in situ analogous to methods used for Grignard reagents. The work of Acree provides a number of examples of reactions involving the compound.[9]

Cross-coupling

edit

The reaction with ethyl bromide produces ethylbenzene:

NaPh + BrEt → PhEt + NaBr

An analogous reaction also occurs in the preparation of phenylsodium to produce diphenyl:

NaPh + PhBr → Ph-Ph + NaBr

Reaction of benzyl chloride and phenylsodium results in diphenylmethane and (E)-stilbene. Diphenylmethane is the expected product from the substitution of chloride. The formation of stilbene is implicates radical intermediates like those proposed in the Wurtz-Fittig reaction mechanism.

The reaction of phenylsodium with benzoyl chloride yields, after hydrolysis, triphenylcarbinol. Benzophenone is proposed as an intermediate.

2NaPh + PhCOCl → Ph3CONa + NaCl

Metallation

edit

Metallation reactions with phenylsodium proceed in the following general form:

PhNa + RH → C6H6 + RNa

The metallation is confirmed/detected by treatment of the metallated compound with carbon dioxide, affording the corresponding sodium carboxylate which can be acidified to yield the carboxylic acid:

RNa + CO2 → RCO2Na

Metallation follows a generally predictable order of reactivity. Benzene can be metallated by alkylsodium compounds resulting in phenylsodium. The phenylsodium is then able to metallate other aromatic compounds. The most commonly used reagent for metallation by phenylsodium is toluene, producing benzylsodium. Toluene can be metallated by synthesizing phenylsodium in toluene instead of benzene:

C6H5Cl + 2Na + C6H5CH3 → C6H6 + NaCl + C6H5CH2Na

The benzylsodium can then be used in a nucleophilic addition. The effectiveness of the metallation can be determined by carbonating and isolating the phenylacetic acid product.

See also

edit

References

edit
  1. ^ a b Schlenk, W.; Holtz, Johanna (January 1917). "Über die einfachsten metallorganischen Alkaliverbindungen". Berichte der Deutschen Chemischen Gesellschaft. 50 (1): 262–274. doi:10.1002/cber.19170500142.
  2. ^ a b Seyferth, Dietmar (January 2006). "Alkyl and Aryl Derivatives of the Alkali Metals: Useful Synthetic Reagents as Strong Bases and Potent Nucleophiles. 1. Conversion of Organic Halides to Organoalkali-Metal Compounds". Organometallics. 25 (1): 13. doi:10.1021/om058054a.
  3. ^ Schorigin, Paul (May 1908). "Synthesen mittels Natrium und Halogenalkylen". Berichte der Deutschen Chemischen Gesellschaft. 41 (2): 2114. doi:10.1002/cber.190804102208.
  4. ^ Bryce-Smith, D.; Turner, E. E. (1953). "177. Organometallic Compounds of the Alkali Metals. Part II. The Metallation and Dimetallation of Benzene". Journal of the Chemical Society (Resumed): 861–863. doi:10.1039/jr9530000861.
  5. ^ Jenkins, William W. (June 1942). "A Study on the Preparation of Phenyl Sodium". Master's Theses (225).
  6. ^ a b Schümann, Uwe; Behrens, Ulrich; Weiss, Erwin (April 1989). "Synthese und Struktur von Bis[μ-phenyl(pentamethyldiethylentriamin)natrium], einem Phenylnatrium-Solvat". Angewandte Chemie. 101 (4): 481–482. Bibcode:1989AngCh.101..481S. doi:10.1002/ange.19891010420.
  7. ^ Acree, S. F. (August 1903). "On Sodium Phenyl and the Action of Sodium on Ketones (report on work by John Ulric Nef)". Journal of the American Chemical Society. 25 (8): 588–609. doi:10.1021/ja02010a026.
  8. ^ Screttas, Constantinos G.; Micha-Screttas, Maria (June 1984). "Hydrocarbon-soluble organoalkali-metal reagents. Preparation of aryl derivatives". Organometallics. 3 (6): 904–907. doi:10.1021/om00084a014.
  9. ^ Acree, Solomon, F (1903). On Sodium Phenyl and the Action of Sodium on Ketones. Easton, PA: Press of the Chemical Publishing Co. pp. 1–23.{{cite book}}: CS1 maint: multiple names: authors list (link)