The Chiappa Rhino is a series of revolvers produced by Italian manufacturer Chiappa Firearms. The Rhino's frames are CNC-machined from a solid block of high-tensile aluminium alloy and all internal parts are CNC-machined from steel.
| Chiappa Rhino | |
|---|---|
 Chiappa Rhino 40DS and 20D | |
| Type | Revolver |
| Place of origin | Italy |
| Production history | |
| Designer | Emilio Ghisoni & Antonio Cudazzo[1][2] |
| Designed | 2008 |
| Manufacturer | Chiappa Firearms |
| Unit cost | $775-$1652 MSRP (depending on version)[1][3] |
| Produced | 2010–present |
| Variants | 20D, 20DS, 30DS, 40DS, 50DS, 60DS, 60DS Charging Rhino (competition version for 9x19mm) All variants in Black or Hard Chrome finish. Charging Rhino version only in Black. [4][5] |
| Specifications | |
| Mass | 20D/20DS: 700 g (24.7 oz) 30DS: 771 g (27.2 oz) 40DS: 850 g (30 oz) 50DS: 895 g (31.6 oz) 60DS/60DS Charging Rhino: 936g (33 oz)[6] |
| Length | 20D/20DS: 164 mm (6.5 in) 30DS: 190 mm (7.5 in) 40DS: 215 mm (8.5 in) 50DS: 241 mm (9.5 in) 60DS/60DS Charging Rhino: 267 mm (10.5 in)[6] |
| Barrel length | 20D/20DS: 51 mm (2.0 in) 30DS: 76 mm (3.0 in) 40DS: 102 mm (4.0 in) 50DS: 127 mm (5.0 in) 60DS/60DS Charging Rhino: 152 mm (6.0 in) |
| Cartridge | .357 Magnum/.38 Special 9×19mm Parabellum .40 S&W 9×21mm[7] |
| Action | DA/SA or DAO revolver[6] |
| Feed system | 6-round hexagonal cylinder[6] |
| Sights | Fixed open sights[6] |
Chambered for the .357 Magnum/.38 Special, 9mm Parabellum, .40 S&W, or 9×21mm cartridges, their most distinctive feature is that the barrel is on a much lower bore axis, as the Rhino fires from the lowermost chamber of the cylinder rather than from the topmost chamber in conventional revolvers.[8]
Design details
edit
Designed by Emilio Ghisoni and Antonio Cudazzo, the Rhino differs from traditional revolvers in a number of ways. Stylistically it resembles Ghisoni's earlier design, the Mateba Autorevolver, and was his last design before his death in 2008.[1][2][9]
In order to reduce weight, the frame of the Rhino is made of Ergal (an aluminium alloy), and the receiver is CNC-machined from a solid block of high-tensile aluminium. Virtually all components are CNC-machined as well; this manufacturing process yields a very precise fit with minimal tolerances. For models other than the 20D, the trigger may be used in either single-action or double-action mode. Only the 2-inch 20D model comes in double-action only.[10]
The external cocking lever is not actually a hammer as on most revolvers. Instead, it is merely a linkage handle used to cock an internal hammer, and immediately falls back into place after cocking is complete, minimizing the number of externally moving parts and reciprocating mass. An additional feature of this gun is, unlike most revolvers, it comes with an accessory rail (except for the 2-inch and 3-inch models), on which tactical lights and laser sights can be mounted.[10] The aluminium-based revolver is available in anodized finishes resembling traditional bluing, as well as a version resembling electroless nickel finish referred as the "White Rhino".[3] A gold-colored version was displayed at the 2014 SHOT Show.[11]
Firing from the lowermost chamber in the cylinder as opposed to the uppermost is intended to reduce muzzle flip by aligning the recoil more into the shooter's wrist, rather than above it.[8] A downside of this design is that it increases the vertical distance between the sight line and the bore axis (sight height), meaning the gun will have a greater parallax error when aiming at close range. Another distinctive feature is that the cross-section of its cylinder is hexagonal (though with rounded corners) instead of circular; this is intended to narrow the weapon's profile in concealed carry applications.[3][6][12]
Variants
editChiappa manufactures the Rhino in a number of sizes, barrel lengths, finishes, and calibers, including a frame that is made from polymer instead of aluminum.
- POLYLITE 20DS with a polymer frame[2]
- 20D (double-action only 2-inch barrel)[13]
- 20DS (double-action/single-action 2-inch barrel)[6]
- 30DS (double-action/single-action 3-inch barrel)
- 40DS (double-action/single-action 4-inch barrel)[14]
- 50DS (double-action/single-action 5-inch barrel)
- 60DS (double-action/single-action 6-inch barrel)
See also
editReferences
edit- ^ a b c "Chiappa Firearm's Revolutionary Rhino .357 Magnum Revolver" by Ammoland.com
- ^ a b c "SHOT Show 2014 New from Chiappa: Rhino PolyLite revolver". 16 January 2014.
- ^ a b c "Chiappa's New Upside-Down Revolver". Shooting Illustrated. Archived from the original on 2015-09-25. Retrieved 2010-06-23.
- ^ 2009 catalog page 3 (PDF)[permanent dead link]
- ^ The first digit in the model number indicates the barrel length, in inches. Smooth grip. If this is followed by "DS", the action is DA/SA; if followed by "D", the action is DAO.
- ^ a b c d e f g James Tarr (22 December 2011). "Review: Chiappa Rhino 20DS". Handguns magazine.
- ^ Lee, Jerry (12 August 2014). Gun Digest 2015. Iola, Wisconsin: F+W Media, Inc. p. 436. ISBN 978-1-4402-3912-0.[permanent dead link]
- ^ a b Lee, Jerry (15 July 2014). Gun Digest 2015. Iola, Wisconsin: F+W Media. p. 968. ISBN 978-1-4402-3918-2.[permanent dead link]
- ^ Cunningham, Grant (29 November 2012). Gun Digest Shooter's Guide to Handguns. Iola, Wisconsin: Gun Digest Books. pp. 29–30. ISBN 978-1-4402-3276-3.[permanent dead link]
- ^ a b "Chiappa's Hard-Hitting Rhino Revolver Series". Tactical Life. 22 January 2015.
- ^ "Chiappa Rhino 60DS: The futuristic pimp's choice (VIDEO)". Guns.com. Retrieved 2016-01-20.
- ^ Mann, Richard (April 20, 2011). "Anything but Ordinary: The Chiappa Rhino", American Rifleman
- ^ "Chiappa Firearms // Rhino".
- ^ William Bell (3 September 2012). "Chiappa Rhino 40DS .357 Mag/9mm Revolver Review". Tactical Life.
External links
edit