Eshmaiel Ganjian
I am Professor of Civil Engineering Materials. I teach highway pavement design and transport engineering and Construction technology. My main research is in Civil Engineering Materials.
Academic Qualifications:
B.Sc., Civil Engineering; University of Leeds (1985)
M.Sc. Eng., Civil Engineering In Hot Climates, University of Leeds (1986)
Ph.D. Civil Engineering, University of Leeds (1991)
Professional Civil Engineer (Tehran 10-3-8322, 1993)
Postgraduate certificate in Learning and Teaching in Higher Education ILTM (2001)
Professional Memberships:
Member of the American Concrete Institute (1993)
International Committee on Large Dams, ICOLD (Materials for concrete dams committee) (1993-98).
American Concrete Institute (1993).
Iranian Society of Civil Engineers (1993).
Editorial and Technical Committee member of the Iranian Standards National Committee for Hardened and Fresh Concrete and Building materials (1993-1998)
Research Interests:
- Self Compacting Concrete properties and design incorporating waste materials
- Investigation into alternative fibres as a suitable replacement for asbestos fibre used in cement sheeting
- Polymer wastes for construction applications
- Utilisation of Various mineral wastes in Controlled Low Strength Materials
- Novel cementing materials
- Developing instrumentation for road pavement evaluations
- Development of Low-carbon cement and concrete using by products and waste materials
- Ways to reduce Carbon foot print of Portland cement production and cementitious products
Selected Publications:
-Ganjian, E., Sadeghi-Pouya, H., and Claisse, P. (2009) 'Plasterboard and Gypsum Waste as a Novel Cementitious Binder.' In Concrete Materials: Properties, Performance and Applications : Nova publishers: 1-115
-Ganjian, E., Khorami, M., and Maghsoudi, A. (2009) 'Scrap-tyre rubber replacement for aggregate and filler in concrete.' Construction and Building Materials 23, (5) 1828-1836.
-Ganjian, E., and Sadeghi-Pouya, H. (2009) 'The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag.' Construction and Building Materials 23, (2) 644-652.
-Ganjian, E., and Sadeghi-Pouya, H. (2009) 'Investigation on the use of industrial and construction demolition waste as cement replacement in concrete paving blocks.' In ConMat’09 - ‘4th International Conference on Construction Materials: Performance, Innovations and Structural Implications’, S 6-2-3, Nagoya, Japan: 295-300
-Ganjian, E., and Tyrer, M. (2009) Ways to reduce carbon foot print of Portland cement production and cementitious products. External report
-Ganjian, E., Khorami, M., and Sadeghi-Pouya, H. (2008) 'Application of kraft and acrylic fibres to replace asbestos in composite cement sheets.' In Proc. 11th International Inorganic – Bonded Fiber Composites Conference, Madrid, Spain: 52-61
-Ganjian, E., and Sadeghi-Pouya, H. (2007) 'Durability of Silica Fume and GGBS concrete in a tidal zone.' ICE Proceedings Construction Materials 160, (3) 103-111.
-Ganjian, E., Claisse, P, Tyrer, M., and Atkinson, A. (2006) 'Factors affecting measurement of hydraulic conductivity in low strength cementitious materials.' Cement and Concrete Research 36, (12) 2109-2114.
-Ganjian, E., and Sadeghi-Pouya, H. (2005) 'Effect of magnesium and sulphate ions on durability of silica fume blended mixes exposed to the seawater tidal zone.' Cement and Concrete Research 35, (7) 1332-1343.
-Ganjian, E., Claisse, P.A., Tyrer, M., and Atkinson, A. (2004) 'Selection of cementitious mixes as a barrier for landfill leachate containment.' Journal of Materials in Civil Engineering 16, (5) 477-486.
-Ganjian, E. (1997) 'Properties of sulphur concrete in respect to mix design.' In Proceedings of 4th International Conference on Civil Engineering, Tehran, Iran Sharif University of Technology: 132-140
-Ganjian, E., Tinker, J.A., and Cabrera, J.G. (1994) 'Predicting the thermal conductivity of concrete using density and porosity.' In Int. Conf. on Building Envelope Systems and Technology, Singapore: 330-336
Selected Funding:
Academic Qualifications:
B.Sc., Civil Engineering; University of Leeds (1985)
M.Sc. Eng., Civil Engineering In Hot Climates, University of Leeds (1986)
Ph.D. Civil Engineering, University of Leeds (1991)
Professional Civil Engineer (Tehran 10-3-8322, 1993)
Postgraduate certificate in Learning and Teaching in Higher Education ILTM (2001)
Professional Memberships:
Member of the American Concrete Institute (1993)
International Committee on Large Dams, ICOLD (Materials for concrete dams committee) (1993-98).
American Concrete Institute (1993).
Iranian Society of Civil Engineers (1993).
Editorial and Technical Committee member of the Iranian Standards National Committee for Hardened and Fresh Concrete and Building materials (1993-1998)
Research Interests:
- Self Compacting Concrete properties and design incorporating waste materials
- Investigation into alternative fibres as a suitable replacement for asbestos fibre used in cement sheeting
- Polymer wastes for construction applications
- Utilisation of Various mineral wastes in Controlled Low Strength Materials
- Novel cementing materials
- Developing instrumentation for road pavement evaluations
- Development of Low-carbon cement and concrete using by products and waste materials
- Ways to reduce Carbon foot print of Portland cement production and cementitious products
Selected Publications:
-Ganjian, E., Sadeghi-Pouya, H., and Claisse, P. (2009) 'Plasterboard and Gypsum Waste as a Novel Cementitious Binder.' In Concrete Materials: Properties, Performance and Applications : Nova publishers: 1-115
-Ganjian, E., Khorami, M., and Maghsoudi, A. (2009) 'Scrap-tyre rubber replacement for aggregate and filler in concrete.' Construction and Building Materials 23, (5) 1828-1836.
-Ganjian, E., and Sadeghi-Pouya, H. (2009) 'The effect of Persian Gulf tidal zone exposure on durability of mixes containing silica fume and blast furnace slag.' Construction and Building Materials 23, (2) 644-652.
-Ganjian, E., and Sadeghi-Pouya, H. (2009) 'Investigation on the use of industrial and construction demolition waste as cement replacement in concrete paving blocks.' In ConMat’09 - ‘4th International Conference on Construction Materials: Performance, Innovations and Structural Implications’, S 6-2-3, Nagoya, Japan: 295-300
-Ganjian, E., and Tyrer, M. (2009) Ways to reduce carbon foot print of Portland cement production and cementitious products. External report
-Ganjian, E., Khorami, M., and Sadeghi-Pouya, H. (2008) 'Application of kraft and acrylic fibres to replace asbestos in composite cement sheets.' In Proc. 11th International Inorganic – Bonded Fiber Composites Conference, Madrid, Spain: 52-61
-Ganjian, E., and Sadeghi-Pouya, H. (2007) 'Durability of Silica Fume and GGBS concrete in a tidal zone.' ICE Proceedings Construction Materials 160, (3) 103-111.
-Ganjian, E., Claisse, P, Tyrer, M., and Atkinson, A. (2006) 'Factors affecting measurement of hydraulic conductivity in low strength cementitious materials.' Cement and Concrete Research 36, (12) 2109-2114.
-Ganjian, E., and Sadeghi-Pouya, H. (2005) 'Effect of magnesium and sulphate ions on durability of silica fume blended mixes exposed to the seawater tidal zone.' Cement and Concrete Research 35, (7) 1332-1343.
-Ganjian, E., Claisse, P.A., Tyrer, M., and Atkinson, A. (2004) 'Selection of cementitious mixes as a barrier for landfill leachate containment.' Journal of Materials in Civil Engineering 16, (5) 477-486.
-Ganjian, E. (1997) 'Properties of sulphur concrete in respect to mix design.' In Proceedings of 4th International Conference on Civil Engineering, Tehran, Iran Sharif University of Technology: 132-140
-Ganjian, E., Tinker, J.A., and Cabrera, J.G. (1994) 'Predicting the thermal conductivity of concrete using density and porosity.' In Int. Conf. on Building Envelope Systems and Technology, Singapore: 330-336
Selected Funding:
less
Related Authors
Interests
Uploads
Papers by Eshmaiel Ganjian